!>d) ReIsEr2FsHoM mIIIIIIIII$%IJbcvcv ,H,H H,H H,lH dH,8H  H,\ H HHH,HH,HH,HDHH,HHpAA^\@a@a@# # inittab This file describes how the INIT process should set up # the system in a certain run-level. # # Author: Miquel van Smoorenburg, # Modified for RHS Linux by Marc Ewing and Donnie Barnes # # Default runlevel. The runlevels used by RHS are: # 0 - halt (Do NOT set initdefault to this) # 1 - Single user mode # 2 - Multiuser, without NFS (The same as 3, if AV@a@a@# # inittab This file describes how the INIT process should set up # the system in a certain run-level. # # Author: Miquel van Smoorenburg, # Modified for RHS Linux by Marc Ewing and Donnie Barnes # # Default runlevel. The runlevels used by RHS are: # 0 - halt (Do NOT set initdefault to this) # 1 - Single user mode # 2 - Multiuser, without NFS (The same as 3, if you do not have networking) # 3 - Full multiuser mode # 4 - unused # 5 - X11 # 6 - reboot (Do NOT set initdefault to this) # id:3:initdefault: # System initialization. si::sysinit:/etc/rc.d/rc.sysinit l0:0:wait:/etc/rc.d/rc 0 l1:1:wait:/etc/rc.d/rc 1 l2:2:wait:/etc/rc.d/rc 2 l3:3:wait:/etc/rc.d/rc 3 l4:4:wait:/etc/rc.d/rc 4 l5:5:wait:/etc/rc.d/rc 5 l6:6:wait:/etc/rc.d/rc 6 # Trap CTRL-ALT-DELETE ca::ctrlaltdel:/sbin/shutdown -t3 -r now # When our UPS tells us power has failed, assume we have a few minutes # of power left. Schedule a shutdown for 2 minutes from now. # This does, of course, assume you have powerd installed and your # UPS connected and working correctly. pf::powerfail:/sbin/shutdown -f -h +2 "Power Failure; System Shutting Down" # If power was restored before the shutdown kicked in, cancel it. pr:12345:powerokwait:/sbin/shutdown -c "Power Restored; Shutdown Cancelled" # Run gettys in standard runlevels 0:2345:respawn:/sbin/mingetty ttys/0 1:2345:respawn:/sbin/mingetty ttys/1 2:2345:respawn:/sbin/mingetty ttys/2 #c:2345:respawn:/sbin/mingetty serial/0 # Run xdm in runlevel 5 x:5:respawn:/etc/X11/prefdm -nodaemon G@d@d@root:x:0:0:root:/root:/bin/bash bin:x:1:1:bin:/bin:/sbin/nologin daemon:x:2:2:daemon:/sbin:/sbin/nologin adm:x:3:4:adm:/var/adm:/sbin/nologin lp:x:4:7:lp:/var/spool/lpd:/sbin/nologin sync:x:5:0:sync:/sbin:/bin/sync shutdown:x:6:0:shutdown:/sbin:/sbin/shutdown halt:x:7:0:halt:/sbin:/sbin/halt mail:x:8:12:mail:/var/spool/mail:/sbin/nologin news:x:9:13:news:/etc/news: uucp:x:10:14:uucp:/var/spool/uucp:/sbin/nologin operator:x:11:0:operator:/root:/sbin/nologin games:x:12:100:games:/usr/games:/sbin/nologin gopher:x:13:30:gopher:/var/gopher:/sbin/nologin ftp:x:14:50:FTP User:/var/ftp:/sbin/nologin nobody:x:99:99:Nobody:/:/sbin/nologin rpm:x:37:37::/var/lib/rpm:/bin/bash vcsa:x:69:69:virtual console memory owner:/dev:/sbin/nologin nscd:x:28:28:NSCD Daemon:/:/sbin/nologin sshd:x:74:74:Privilege-separated SSH:/var/empty/sshd:/sbin/nologin rpc:x:32:32:Portmapper RPC user:/:/sbin/nologin rpcuser:x:29:29:RPC Service User:/var/lib/nfs:/sbin/nologin nfsnobody:x:65534:65534:Anonymous NFS User:/var/lib/nfs:/sbin/nologin mailnull:x:47:47::/var/spool/mqueue:/sbin/nologin smmsp:x:51:51::/var/spool/mqueue:/sbin/nologin pcap:x:77:77::/var/arpwatch:/sbin/nologin user:x:500:501::/home/user:/bin/bash pW@d@d@995d@d@d@995d@d@d@995d@d@d@ Pot remove the follHK `HK,4HK HK,HK @ HK, HK  H,h H @( H, H H ,H  8HC,tH$ H$ H$ PH$ HH$ Pt up # the system in a certain run/dev/dev/ubd/0 / reiserfs rw 0 0 none /proc proc rw 0 0 /dev/ubd/0 / reiserfs rw 0 0 none /proc proc rw 0 0 devfs /dev devfs rw 0 0 none /dev/pts devpts rw,gid=5,mode=620 0 0 none /mnt hostfs rw 0 0 N@ZL@ZL@Eroot:$1$qeyVsurN$UGGO5W0/GVAOWYGQ3cDb7/:12429:0:99999:7::: bin:*:12429:0:99999:7::: daemon:*:12429:0:99999:7::: adm:*:12429:0:99999:7::: lp:*:12429:0:99999:7::: sync:*:12429:0:99999:7::: shutdown:*:12429:0:99999:7::: halt:*:12429:0:99999:7::: mail:*:12429:0:99999:7::: news:*:12429:0:99999:7::: uucp:*:12429:0:99999:7::: operator:*:12429:0:99999:7::: games:*:12429:0:99999:7::: gopher:*:12429:0:99999:7::: ftp:*:12429:0:99999:7::: nobod/dev/ubd/0 / reiserfs rw 0 0 none /proc /dev/dev/ubd/0 / reiserfs rw 0 0 none /proc proc rw 0 0 devfs /dev devfs rw 0 0 none /dev/pts devpts rw,gid=5,mode=620 0 0 none /mnt hostfs rw 0 0 ZW@ZW@ZW@Jroot:x:0:root bin:x:1:root,bin,daemon daemon:x:2:root,bin,daemon sys:x:3:root,bin,adm adm:x:4:root,adm,daemon tty:x:5: disk:x:6:root lp:x:7:daemon,lp mem:x:8: kmem:x:9: wheel:x:10:root mail:x:12:mail news:x:13:news uucp:x:14:uucp man:x:15: games:x:20: gopher:x:30: dip:x:40: ftp:x:50: lock:x:54: nobody:x:99: users:x:100: rpm:x:37: floppy:x:19: vcsa:x:69: utmp:x:22: nscd:x:28: slocate:x:21: sshd:x:74: rpc:x:32: rpcuser:x:29: nfsnobody:x:65534: mailnull:x:47: smmsp:x:51: pcap:x:77: xfs:x:43: ntp:x:38: gdm:x:42: canna:x:39: lie:x:500: named:x:25: user:x:501: 1pW@d@d@root:aGCTmR/1FMHZg:12432:0:99999:7::: bin:*:12429:0:99999:7::: daemon:*:12429:0:99999:7::: adm:*:12429:0:99999:7::: lp:*:12429:0:99999:7::: sync:*:12429:0:99999:7::: shutdown:*:12429:0:99999:7::: halt:*:12429:0:99999:7::: mail:*:12429:0:99999:7::: news:*:12429:0:99999:7::: uucp:*:12429:0:99999:7::: operator:*:12429:0:99999:7::: games:*:12429:0:99999:7::: gopher:*:12429:0:99999:7::: ftp:*:12429:0:99999:7::: nobody:*:12429:0:99999:7::: rpm:!!:12429:0:99999:7::: vcsa:!!:12429:0:99999:7::: nscd:!!:12429:0:99999:7::: sshd:!!:12429:0:99999:7::: rpc:!!:12429:0:99999:7::: rpcuser:!!:12429:0:99999:7::: nfsnobody:!!:12429:0:99999:7::: mailnull:!!:12429:0:99999:7::: smmsp:!!:12429:0:99999:7::: pcap:!!:12429:0:99999:7::: user:VGDJElapVGXyU:12432:0:99999:7::: pW@d@d@  @@3N<@V@V@LABEL=/1 / ext2 defaults 1 1 none /dev/pts devpts gid=5,mode=620 0 0 none /proc proc defaults 0 0 none /dev/shm tmpfs defaults 0 0 /dev/hda3 swap swap defaults 0 0 |E@;C@[I@root:::root bin:::root,bin,daemon daemon:::root,bin,daemon sys:::root,bin,adm adm:::root,adm,daemon tty::: disk:::root lp:::daemon,lp mem::: kmem::: wheel:::root mail:::mail news:::news uucp:::uucp man::: games::: gopher::: dip::: ftp::: lock::: nobody::: users::: rpm:x:: floppy:x:: vcsa:x:: utmp:x:: nscd:x:: slocate:x:: sshd:x:: rpc:x:: rpcuser:x:: nfsnobody:x:: mailnull:x:: smmsp:x:: pcap:x:: user:!:: guest:!:: c@^@^@nameserver 192.168.0.254 !@^@^@.0.148 redhat9 redhat9.goober.org 192.168.0.151 turbolinux7 turbolinux7.goober.org 192.168.0.250 uml-test uml-test.goober.org 192.168.0.254 router xdisplay  k,0,x0H,0,0,d t ,H , , , , ,l ,@ , H, H , 0 ,\ ,\A0V@ho>I@( ...A0V@H>I@ siV@[~~~rebootV@t3N~~~runlevelV@ )l3V@% 0V@ 1A0V@ho>I@( ...A0V@H>I@ pW@pW@pW@.V@V@V@/V@V@V@/V@V@V@/V@V@V@/V@V@V@/V@V@V@/V@V@V@/V@V@V@/Y#};BQrWB\{keytableanacronsyslograndomnetworkcrondsshdatd...AV@V@V@(ԝ ...A0)@0G>)@(ԝ ...A0)@0G>)@(ԝ ...A0)@0G>)@(ԝ ...A0)@0G>)@ n]"[Z QHHMMQQ ST  XX]] `a OdPd f"f hi mmp#p/s=s u%v xx  }q}t ^ H  "   oԍ OZ ˒     P!* !x*0* A+8C+8 E+ f+q+ + +++ + ++ + .H dY Z Z\ 2c 3c 4c5c 6c7ct u u,v [UUH ,T0$,-eUU1UU""UU-UU[UU!=UU-aUU-zUU]UU0UU[UU-zUU]UU-nUU$0UU-sUU-eUU2UU""UU-UU[UU!=UU-aUU-zUU]UU$rcUUUUhUU+UU[TUU4UU8UU,UUlMVUUUU(-UU(UUUU%UU[UU-zUU]UU-nUU$0UU-sUU-eUU1UU""UU-UU[UU!=UU-aUU-zUU]UU$rcUU(d&UU[UU-zUU]UUA0V@ho>I@( ...A0V@H>I@ siV@[~~~rebootV@t3N~~~runlevelV@ )l3V@% vc/00rootW@ݗttys/11LOGINV@ vc/22rootpW@ @h˝ϝ,˝ϝ˝Н,˝ѝ,t˝ѝp˝ҝ, ˝ҝ0 ˝,| ˝` ˝,4 ˝ ˝, ˝ ˝, ˝ ˝,l ˝P ˝,$ ˝ ӝԝ, ӝԝh ԝ՝,\ ԝ՝ < ԝ, ԝ0ԝ,ԝ0T SS SLT ST ST HSS m!SU "SU ""SU A#SnT b#SrT u#SS u#S.T #ST #S1T #SU $SzT  $SSx $SSp $SSh $ST` $SUX $SSP $SH %ST@ 0%SU8 D%ST0 s&SS( &ST &ST &ST &ST &ST  'ST 1'ST K'SU 'ST 'ST L(SS b(SDT l(S@U (SGT (ST (SS (SDU (SS )ST )SS 3)ST 7)SSx 8)STp F)SSh f)SS` m)STX )STP 1*STH *ST@ *SOT8 3+SdU0 WBSU( FaSS oST ,7ST wSU SsT SuT sS/T шS0T SXT SU BSU SS SST SS SS SS  SS iSU SS STx cSTp =SUTh ,SS` kSUX mSTP STH S T@ S{T8 ٟSS0 pS)@ԝ(ӝԝ ...A0)@0G>)@ԝ՝ӝԝm՝֝m՝םn՝؝o՝ٝo՝ڝp՝۝q՝ܝq՝ݝr՝ޝ՝ߝcatncat9cat8cat7cat6cat5cat4cat3cat2cat1...A )@sC@I@ӝԝ`ӝXmԝPmԝHnԝ@oԝ8oԝ0pԝ(qԝ qԝrԝԝRԝ՝Vԝ*W[ԝwhatislocalX11R6catncat9cat8cat7cat6cat5cat4cat3cat2cat1...Ah)@(@(@)@@@b@@@8 5~/M@V@V@@r@V@V@b5\@5\@5\@8~bK@K@K@8M˝ҝ(˝ ...A0)@?>I@+,-1456?@ADY_bcdghijklmnoqz   cdehlV@pW@pW@?C@?C@I@no=@@@tĝ"0ĝ#,ĝ#0t˝H,H˝H,˝/I,˝/I˝I,˝I˝,p˝  X˝,,˝˝̝,˝̝8˝͝, ˝͝, #pW@pW@pW@  ./G*psX_ajMW@pW@pW@Xb@@@8|Linux version 2.4.22 (lie@blackcomb.ece.toronto.edu) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Wed Nov 19 12:45:42 EST 2003 On node 0 totalpages: 8192 zone(0): 8192 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: ubd0=ece1724.image root=/dev/ubd0 Calibrating delay loop... 1516.93 BogoMIPS Memory: 28860k available Dentry cache hash table entries: 4096 (order: 3, 32768 bytes) Inode cache hash table entries: 2048 (order: 2, 16384 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 8192 (order: 3, 32768 bytes) Checking for host processor cmov support...Yes Checking for host processor xmm support...No Checking that ptrace can change system call numbers...OK Checking that host ptys support output SIGIO...Yes Checking that host ptys support SIGIO on close...No, enabling workaround POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd VFS: Disk quotas vdquot_6.5.1 devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 JFFS version 1.0, (C) 1999, 2000 Axis Communications AB JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB. pty: 256 Unix98 ptys configured SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256). RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) PPP generic driver version 2.4.2 Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky SCSI subsystem driver Revision: 1.00 scsi0 : scsi_debug, Version: 0.61 (20020815), num_devs=1, dev_size_mb=8, opts=0x0 Vendor: Linux Model: scsi_debug Rev: 0004 Type: Direct-Access ANSI SCSI revision: 03 blkmtd: error: missing `device' name Initializing software serial port version 1 mconsole (version 2) initialized on /davidlie/a/a0/lie/.uml/cSY6eS/mconsole Partition check: ubda: unknown partition table UML Audio Relay (host dsp = /dev/sound/dsp, host mixer = /dev/sound/mixer) Initializing stdio console driver NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 2048 bind 4096) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. FAT: bogus logical sector size 0 UMSDOS: msdos_read_super failed, mount aborted. FAT: bogus logical sector size 0 FAT: bogus logical sector size 0 JFFS: Trying to mount a non-mtd device. reiserfs: found format "3.6" with standard journal reiserfs: checking transaction log (device ubd(98,0)) ... for (ubd(98,0)) ubd(98,0):Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Mounted devfs on /dev  Za@V@V@bg@g@g@8'().bF@F@F@8(bV@V@V@8/ĝ#(Ýĝ ...A0s\@4M@4M@ĝ"(Ýĝ ... @bQsGH&II XH'I,|H(I,PH(I 8H*I,H*I H+I,H+I H,I, H,I `t H-I,H H-I  H.I,T H.I,( H.I,H.I,H/IH/I (H/IH/I in/bash root:x:0:0:root:/root:/bin/bash bin:x:1:rootroot:x:0:0:root:/root:/bin/bash bin:x:1:1:bin:/bin:/sbin/nologin daemon:x:2:2:daemon:/sbin:/sbin/nologin adm:x:3:4:adm:/var/adm:/sbin/nologin lp:x:4:7:lp:/var/spool/lpd:/sbin/nologin sync:x:5:0:sync:/sbin:/bin/sync shutdown:x:6:0:shutdown:/sbin:/sbin/shutdown halt:x:7:0:halt:/sbin:/sbin/halt mail:x:8:12:mail:/var/spool/mail:/sbin/nologin news:x:9:13:news:/etc/news: uucp:x:10:14:uucp:/var/spool/uucp:/sbin/nologin operator:x:11:0:operator:/root:/sbin/nologin games:x:12:100:games:/usr/games:/sbin/nologin gopher:x:13:30:gopher:/var/gopher:/sbin/nologin ftp:x:14:50:FTP User:/var/ftp:/sbin/nologin nobody:x:99:99:Nobody:/:/sbin/nologin rpm:x:37:37::/var/lib/rpm:/bin/bash vcsa:x:69:69:virtual console memory owner:/dev:/sbin/nologin nscd:x:28:28:NSCD Daemon:/:/sbin/nologin sshd:x:74:74:Privilege-separated SSH:/var/empty/sshd:/sbin/nologin rpc:x:32:32:Portmapper RPC user:/:/sbin/nologin rpcuser:x:29:29:RPC Service User:/var/lib/nfs:/sbin/nologin nfsnobody:x:65534:65534:Anonymous NFS User:/var/li/d@ }8YI@# do not bell on tab-completion #set bell-style none set meta-flag on set input-meta on set convert-meta off set output-meta on # Completed names which are symbolic links to # directories have a slash appended. set mark-symlinked-directories on $if mode=emacs # for linux console and RH/Debian xterm "\e[1~": beginning-of-line "\e[4~": end-of-line "\e[5~": beginning-of-history "\e[6~": end-of-history "\e[3~": delete-char "\e[2~": quoted-insert "\e[5C": forward-word "\e[5D": backward-word # for rxvt "\e[8~": end-of-line # for non RH/Debian xterm, can't hurt for RH/DEbian xterm "\eOH": beginning-of-line "\eOF": end-of-line # for freebsd console "\e[H": beginning-of-line "\e[F": end-of-line $endif :d@/d@ }8YI@pW@ }8YI@# do not bell on tab-completion #set bell-style none set meta-flag on set input-meta on set convert-meta off set output-meta on # Completed names which are symbolic links to # directories have a slash appended. set mark-symlinked-directories on $if mode=emacs # for linux console and RH/Debian xterm "\e[1~": beginning-of-line "\e[4~": end-of-line "\e[5~": beginning-of-history "\e[6~": end-of-history "\e[3~": delete-char "\e[2~": quoted-insert "\e[5C": forward-word "\e[5D": backward-word # for rxvt "\e[8~": end-of-line # for non RH/Debian xterm, can't hurt for RH/DEbian xterm "\eOH": beginning-of-line "\eOF": end-of-line # for freebsd console "\e[H": beginning-of-line "\e[F": end-of-line $endif  W@f>YI@# # hosts.deny This file describes the names of the hosts which are # *not* allowed to use the local INET services, as decided # by the '/usr/sbin/tcpd' server. # # The portmap line is redundant, but it is left to remind you that # the new secure portmap uses hosts.deny and hosts.allow. In particular # you should know that NFS uses portmap! [@ }8YI@# # hosts.allow This file describes the names of the hosts which are # allowed to use the local INET services, as decided # by the '/usr/sbin/tcpd' server. # @ }8YI@order hosts,bind @ {9YI@ext3 ext2 nodev proc nodev devpts iso9660 vfat hfs 34<<4<I@spool/mail pW@I@I@( ...A0)@1>I@( ...A0)@1>I@@8tV0subsys...AH6V@@@( ...A0)@1>I@( ...A0)@1>I@ӝ@8&ӝԝ0man...AH)@sC@I@˝˝˝ҝK˝ѝ ˝̝=˝˝͝ <˝"˝H"˝ "˝ "˝Ix "˝p "˝h "˝/I`'˝ϝX2˝НP&T˝ΝHVXs˝@boot.logsecurespoolermaillogksyms.6ksyms.5ksyms.4ksyms.3ksyms.2ksyms.1ksyms.0rpmpkgslastlogdmesgmessageswtmpvboxcron...AKW@V@V@ʝ( ...C0V@E@)@H@3'Ý8(0( & cȝ+MɝMNb%random-seedpcmciaup2dateslocatelogrotate.statusgamesalternativesmiscdhcprpmnfs...A P)@6M@6M@krb5-libs krb5-admin krb5-kdc krb5-clients krb5-appl krb5-doc krb5-misc krb5-build pty telnet test cFg>Fg>I@@8&0mit...AH)@#C@I@    WE@)2>I@0.E@[g>I@libpty.so.1.2 I@I@I@V@[g>I@libkrb5.so.3.1V@I@I@DE@[g>I@libkrb4.so.2.0I@I@I@5ReIsErLBtĝ"0ĝ#,ĝ#0t˝H,H˝H,˝/I,˝/I˝I,˝I˝,p˝  X˝,,˝˝̝,˝̝8˝͝, ˝͝, #pW@pW@pW@  ./G*psX_aMW@pW@pW@Xb@@@8|Linux version 2.4.22 (lie@blackcomb.ece.toronto.edu) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Wed Nov 19 12:45:42 EST 2003 On node 0 totalpages: 8192 zone(0): 8192 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: ubd0=ece1724.image root=/dev/ubd0 Calibrating delay loop... 1516.93 BogoMIPS Memory: 28860k available Dentry cache hash table entries: 4096 (order: 3, 32768 bytes) Inode cache hash table entries: 2048 (order: 2, 16384 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 8192 (order: 3, 32768 bytes) Checking for host processor cmov support...Yes Checking for host processor xmm support...No Checking that ptrace can change system call numbers...OK Checking that host ptys support output SIGIO...Yes Checking that host ptys support SIGIO on close...No, enabling workaround POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd VFS: Disk quotas vdquot_6.5.1 devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 JFFS version 1.0, (C) 1999, 2000 Axis Communications AB JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB. pty: 256 Unix98 ptys configured SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256). RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) PPP generic driver version 2.4.2 Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky SCSI subsystem driver Revision: 1.00 scsi0 : scsi_debug, Version: 0.61 (20020815), num_devs=1, dev_size_mb=8, opts=0x0 Vendor: Linux Model: scsi_debug Rev: 0004 Type: Direct-Access ANSI SCSI revision: 03 blkmtd: error: missing `device' name Initializing software serial port version 1 mconsole (version 2) initialized on /davidlie/a/a0/lie/.uml/cSY6eS/mconsole Partition check: ubda: unknown partition table UML Audio Relay (host dsp = /dev/sound/dsp, host mixer = /dev/sound/mixer) Initializing stdio console driver NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 2048 bind 4096) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. FAT: bogus logical sector size 0 UMSDOS: msdos_read_super failed, mount aborted. FAT: bogus logical sector size 0 FAT: bogus logical sector size 0 JFFS: Trying to mount a non-mtd device. reiserfs: found format "3.6" with standard journal reiserfs: checking transaction log (device ubd(98,0)) ... for (ubd(98,0)) ubd(98,0):Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Mounted devfs on /dev  Za@V@V@bg@g@g@8'().bF@F@F@8(bV@V@V@8/ĝ#(Ýĝ ...A0s\@4M@4M@ĝ"(Ýĝ ...5*.4:#:B+ZQ!-+b+Z}+%U\+c+.`tztZ{+O!ReIsErLB-,$,=,|=X$ J, J N, N , x ,L 0 ,  , D ,`  @  ,    ,    ,    ,t  T  ,  4 ,  ,` X ,,  ,d,\T,( ,,,|,PV@TI@TI@edTI@TI@TI@A!B!C!D!E!F!G!H!I!J!K!01>01>TI@X !!!!!!!!! ! ! ! ! !!!!!!!!!!!!!!!!!!! !!!"!#!$!%!&!'!(!)!*!+!,!-!.!/!0!1!2!3!4!5!6!7!8!9!:!;!!?!@!}V@1>TI@@bashTI@TI@TI@` a b c d e f g h i j k l m n o p q r s t u v w x y z { | } ~  l pW@H>TI@[ \ ] ^ _ xD72>72>TI@(hostnameTI@TI@TI@bashpW@TI@TI@N O P Q R S T U V W X Y Z UM>UM>TI@h9 : ; < = > ? @ A B C D E F G H I J K L M L I> I>SI@6 7 8 #pW@ I>SI@hostnameSI@SI@SI@hostnameSI@SI@SI@. / 0 1 2 3 4 5 `x@Z>SI@@   ! " # $ % & ' ( ) * + , -  V@Z>SI@  @`2>SI@       oR2>R2>SI@8hostnameSI@SI@SI@ڿۿܿݿT<^@|^@|^@ qֿ׿ؿٿ`;^@|^@|^@ q=PHSK%yJP82KhJ(Ȫ2KyJɪ2KzJ7zJKNGNJINN:\HwJ:\HxJR\HLX\HS[\HX]\H[_\H\pa\H_`a\H`PnHvJ@18605_1906218604_4054418604_4054318604_4054018604_4053918604_4053618604_4053118604_4052418604_1906418604_190632_405262_405222_4047419066_1935219355_1906619355_1906519355_1904819065_40528...A X)@@@V@V@V@/\c@\c@\c@ wKK,wKK wKK,wKK,pwKK dwKK,8wKK ,wKK,wKK KK,KK 0 KK, KQ, KhJ, KhJHd KyJ,8 KyJ KzJ,d KzJK,KKK,KK<KO,KOKO,KOKO,KOhHKO,KOU*OOPlibthread_db-1.0.solibm-2.3.2.solibm.so.6...AHV@C@aI@KKKKKKKKKKKKKKKKKKKKKKKKKK^@%q>aI@ld-2.3.2.so ^@aI@aI@KOKOOKOKOOx1OOhU*OOPlibthread_db-1.0.solibm-2.3.2.solibm.so.6...AH@C@aI@KKKKKKKKKKKKKKKKKKKKKKKKKKsW@%q>aI@ld-2.3.2.so sW@aI@aI@KOKOO1OOt_OO@IoOOsOO}OOlibpthread-0.10.solibc.so.6libpthread.so.0libc-2.3.2.solibm-2.3.2.solibm.so.6...A@C@aI@KKxKpLKKhV\Kd`^cK>P2.4.22-3um2.4.222.4.20-8...AV@L@L@KKi$?p\#d`.bash_profile.bash_history.bash_logout.bashrc...AW@@@KzJ=zJ{Ji$zJ|J7/zJRp\#dzJ}J`.bash_profile.Xclients.bash_logout.bashrc...A)@^@^@KyJ=yJTi$yJU7/yJZp\#dyJV`.bash_profile.Xclients.bash_logout.bashrc...A)@^@^@KhJ@=8qhJiJ0html...AH)@^@^@^@^@^@*H>*H>[I@# Sample stunnel configuration file # Copyright by Michal Trojnara 2002 # Comment it out on Win32 cert = /usr/etc/stunnel/mail.pem chroot = /usr/var/run/stunnel/ # PID is created inside chroot jail pid = /stunnel.pid setuid = nobody setgid = nogroup # Workaround for Eudora bug #options = DONT_INSERT_EMPTY_FRAGMENTS # Authentication stuff #verify = 2 # don't forget about c_rehash CApath # it is located inside chroot jail: #CApath = /certs # or simply use CAfile instead: #CAfile = /usr/etc/stunnel/certs.pem # Some debugging stuff #debug = 7 #output = stunnel.log # Use it for client mode #client = yes # Service-level configuration [pop3s] accept = 995 connect = 110 [imaps] accept = 993 connect = 143 [ssmtp] accept = 465 connect = 25 [s1] accept = 5000 connect = mail.osw.pl:110 # delay = yes [s2] accept = 5001 connect = mail.osw.pl:25 #[https] #accept = 443 #connect = 80 #TIMEOUTclose = 0 *H>*H>[I@..03C@C@[I@..03C@C@[I@...03@C@[I@C@Z>[I@..03@C@[I@0…Sҡb)4&hTkKO,KOKO,KOKO,\KO\KO,KOKO,KOKO,XKOHKO,KO KO, KO KO, KO KO,p KO d KO,8 KO( KO, KO KO, KO KP, KPp KP,D KP, KP, KP KP, KP KP,h KPX KP,, KP$ KP, KP KP, KP KP,` KPP K P,$ K P K P, K PP:U;UU?U@UAUBUCUDUEUFUGUHUIUJUKULUMUNUOUPUQURUSUTUUUVUWUXUYUZU[U\U]U^U_U`UaUbUcUdUeUfUgUhUiUjUkUlUmUnUoUpUqUrUsUtUuUvUwUxUyUzU{U|U}U~UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUVVVVVVVVV V V V V VVVVVVVVVVVVVVVVVVV V!V"V#V$V%V&V'V(V)V*V+V,V-V.V/V0V1V2V3V4V5V6V7V8V9V:V;VV?V@VAVBVCVDVEVFVGVHVIVJVKVLVMVNVOVPVQVRVSVTVUVVVWVXVYVZV[V\V]V^V_V`VaVbVcVdVeVfVgVhViVjVkVlVmVnVoVpVqVrVsVtVuVvVwVxVyVzV{V|V}V~VVVVVVVVVVVVVVVVVm~!E@pbI@liblvm-10.so.1.0bI@bI@bI@liblvm-10.so.1.0bI@bI@bI@7U8U9U.pW@@?>bI@libtermcap.so.2.0.8pW@bI@bI@.U/U0U1U2U3U4U5U6UpW@(2>bI@Hlibpcre.so.0.0.1pW@bI@bI@libgcc_s-3.2.2-20030225.so.1^@bI@bI@&U'U(U)U*U+U,U-Utv^@ u[>bI@@libcrypto.so.0.9.7aV@bI@bI@libssl.so.0.9.7a@bI@bI@libacl.so.1.0.3ZW@bI@bI@ U!U"U#U$U0KZW@m#7>bI@(libattr.so.1.0.1ZW@bI@bI@UUU&E@{1>bI@libuuid.so.1.2bI@bI@bI@UUZW@7>bI@libss.so.2.0 bI@bI@bI@UUUU@>E@{1>bI@ libext2fs.so.2.4V@bI@bI@UUUUU HE@{1>bI@(R:@AFLHMHNHOHPHQHRHSHIIII U U UUUUUhaV@{1>bI@libcom_err.so.2.0V@bI@bI@@:D:V@{1>bI@%'_|/?LKOOPKO,$KOXKO,KOKO,dKO\KO,0KOKO, KO KO, KO KO,p KO` KO,4 KOHKO,KO KO,KOKO,KOKO,XKOHKO,KO KO,KOKO,KOKO,KO\LKO, KOKO,KO8KK,AKOLOMONOOOPOQOROSOTOUOVOWOXO,E@%q>aI@plibnsl-2.3.2.sooW@aI@aI@4O5O6O7O8O9O:O;OO?O@OAOBOCODOEOFOGOHOIOJOeoW@%q>aI@libm-2.3.2.so V@aI@aI@OOOOOOOOO O O O O OOOOOOOOOOOOOOOOOOO O!O"O#O$O%O&O'O(O)O*O+O,O-O.O/O0O1O2O3O;V@%q>aI@libdl-2.3.2.sopW@aI@aI@NNNN:pW@%q>aI@ libcrypt-2.3.2.sooW@aI@aI@NNNNNNt\oW@%q>aI@0libc-2.3.2.so sW@aI@aI@{M|M}M~MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMNNNNNNNNN N N N N NNNNNNNNNNNNNNNNNNN N!N"N#N$N%N&N'N(N)N*N+N,N-N.N/N0N1N2N3N4N5N6N7N8N9N:N;NN?N@NANBNCNDNENFNGNHNINJNKNLNMNNNONPNQNRNSNTNUNVNWNXNYNZN[N\N]N^N_N`NaNbNcNdNeNfNgNhNiNjNkNlNmNnNoNpNqNrNsNtNuNvNwNxNyNzN{N|N}N~NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNsW@%q>aI@ libanl-2.3.2.soaI@aI@aI@wMxMyMzM<8E@%q>aI@ rMsMtMuMvMDE@%q>aI@(libBrokenLocale-2.3.2.soaI@aI@aI@pMqME@%q>aI@libe2p.so.2.3 aI@aI@aI@KOPKH!OO0libe2fsim.1.2.1.so...AX@ C@aI@OOOt_OO@IoOOxsOOh05~OOPlibpthread-0.29.solibc.so.6libpthread.so.0libc-2.3.2.solibthread_db.so.1 ]j"b?hHS xHX,LHX t H[,H H[ (H\,H\ H_,H`,H,H xH xH xH x # the system in a certain run-level. # # Author: Miquel van Smoorenburg, # Modified for RHS Linux by Marc Ewing and Donnie Barnes # # Default runlevel. The runlevels used by RHS are: # 0 - halt (Do NOT set initdefault to this) # 1 - Single user mode # 2 - Multiuser, without NFS (The same as 3, if you do not have networking) # 3 - Full multiuser mode # 4 - unused # 5 - X11 # 6 - reboot (Do NOT set initdefault to this) # id:3:initdefault: # System initialization. si::sysinit:/etc/rc.d/rc.sysinit l0:0:wait:/etc/rc.d/rc 0 l1:1:wait:/etc/rc.d/rc 1 l2:2:wait:/etc/rc.d/rc 2 l3:3:wait:/etc/rc.d/rc 3 l4:4:wait:/etc/rc.d/rc 4 l5:5:wait:/etc/rc.d/rc 5 l6:6:wait:/etc/rc.d/rc 6 # Trap CTRL-ALT-DELETE ca::ctrlaltdel:/s/dev/dev/ubd/0 / reiserfs rw 0 0 none /proc proc rw 0 0 devfs /dev devfs rw 0 0 none /dev/pts devpts rw,gid=5,mode=620 0 0 /dev/dev/ubd/0 / reiserfs rw 0 0 none /proc proc rw 0 0 devfs /dev devfs rw 0 0 none /dev/pts devpts rw,gid=5,mode=620 0 0 wpW@V@V@'d@d@d@d@d@d@/dev/ubd/0 / reiserfs defaults 1 1 none /dev/pts devpts gid=5,mode=620 0 0 /proc /proc proc defaults devpts /dev/pts devpts mode=0622 0 0 /dev/ubd/1 none swap sw vc@`@`@root:$1$KPFogygu$dbsUjEt/UmyUFxVV59S2c/::1:0:180:7::: bin:*:12429:0:99999:7::: daemon:*:12429:0:99999:7::: adm:*:12429:0:99999:7::: lp:*:12429:0:99999:7::: sync:*:12429:0:99999:7::: shutdown:*:12429:0:99999:7::: halt:*:12429:0:99999:7::: mail:*:12429:0:99999:7::: news:*:12429:0:99999:7::: uucp:*:12429:0:99999:7::: operator:*:12429:0:99999:7::: games:*:12429:0:99999:7::: gopher:*:12429:0:99999:7::: ftp:*:12429:0:99999:7::: nobody:*:12429:0:99999:7::: rpm:!!:12429:0:99999:7::: vcsa:!!:12429:0:99999:7::: nscd:!!:12429:0:99999:7::: sshd:!!:12429:0:99999:7::: rpc:!!:12429:0:99999:7::: rpcuser:!!:12429:0:99999:7::: nfsnobody:!!:12429:0:99999:7::: mailnull:!!:12429:0:99999:7::: smmsp:!!:12429:0:99999:7::: pcap:!!:12429:0:99999:7::: user:3u4m4NSvQhox.:1:0:180:7::: guest:3uuv3hPCRvisc:1:0:180:7:::  c@`@`@root:x:0:0:root:/root:/bin/bash bin:x:1:1:bin:/bin:/sbin/nologin daemon:x:2:2:daemon:/sbin:/sbin/nologin adm:x:3:4:adm:/var/adm:/sbin/nologin lp:x:4:7:lp:/var/spool/lpd:/sbin/nologin sync:x:5:0:sync:/sbin:/bin/sync shutdown:x:6:0:shutdown:/sbin:/sbin/shutdown halt:x:7:0:halt:/sbin:/sbin/halt mail:x:8:12:mail:/var/spool/mail:/sbin/nologin news:x:9:13:news:/etc/news: uucp:x:10:14:uucp:/var/spool/uucp:/sbin/nologin operator:x:11:0:operator:/root:/sbin/nologin games:x:12:100:games:/usr/games:/sbin/nologin gopher:x:13:30:gopher:/var/gopher:/sbin/nologin ftp:x:14:50:FTP User:/var/ftp:/sbin/nologin nobody:x:99:99:Nobody:/:/sbin/nologin rpm:x:37:37::/var/lib/rpm:/bin/bash vcsa:x:69:69:virtual console memory owner:/dev:/sbin/nologin nscd:x:28:28:NSCD Daemon:/:/sbin/nologin sshd:x:74:74:Privilege-separated SSH:/var/empty/sshd:/sbin/nologin rpc:x:32:32:Portmapper RPC user:/:/sbin/nologin rpcuser:x:29:29:RPC Service User:/var/lib/nfs:/sbin/nologin nfsnobody:x:65534:65534:Anonymous NFS User:/var/lib/nfs:/sbin/nologin mailnull:x:47:47::/var/spool/mqueue:/sbin/nologin smmsp:x:51:51::/var/spool/mqueue:/sbin/nologin pcap:x:77:77::/var/arpwatch:/sbin/nologin user:x:500:500::/home/user:/bin/bash guest:x:501:501::/home/guest:/bin/bash c@^@^@9999:7::: smmsp:!!:12429:0:99999:7::: pcap:!!:12429:0:99999:7::: user:3u4m4NSvQhox.:1:0:180:7::: guest:3uuv3hPCRvisc:1:0:180:7::: ystem time --adjH0I,H0I (H1I,H1I P0 H2I, H2I0 H3I, H3I H7I, H7I H8I, H8I H9I,H9IH:I,H:I PdH;I,8H;IHH=I,H=I H# # /etc/nsswitch.conf # # An example Name Service Switch config file. This file should be # sorted with the most-used services at the beginning. # # The entry '[NOTFOUND=return]' means that the search for an # entry should stop if the search in the previous entry turned # up nothing. Note that if the search failed due to some other reason # (like no NIS server responding) then the search continues with the # next entry. # # Legal entries are: # # nisplus or nis+ Use NIS+ (NIS version 3) # nis or yp Use NIS (NIS version 2), also called YP # dns Use DNS (Domain Name Service) # files Use the local files # db Use the local database (.db) files # compat Use NIS on compat mode # hesiod Use Hesiod for user lookups # [NOTFOUND=return] Stop searching if not found so far # # To use db, put the "db" in front of "files" for entries you want to be # looked up first in the databases # # Example: #passwd: db files nisplus nis #shadow: db files nisplus nis #group: db files nisplus nis passwd: files shadow: files group: files #hosts: db files nisplus nis dns hosts: files dns # Example - obey only what nisplus tells us... #services: nisplus [NOTFOUND=return] files #networks: nisplus [NOTFOUND=return] files #protocols: nisplus [NOTFOUND=return] files #rpc: nisplus [NOTFOUND=return] files #ethers: nisplus [NOTFOUND=return] files #netmasks: nisplus [NOTFOUND=return] files bootparams: nisplus [NOTFOUND=retpW@C@YI@H;I@H81[;IYI@(console vc/1 vc/2 vc/3 vc/4 vc/5 vc/6 vc/7 vc/8 vc/9 vc/10 vc/11 tty1 tty2 tty3 tty4 tty5 tty6 tty7 tty8 tty9 tty10 tty11 cua0 tty0 ttys/0 ttys/1 ttys/2 >_@^@^@++E@#F;YI@H3IHx3I6Ipi$3I4I`\#d3I5IP.bash_profile.bash_logout.bashrc...A@C@YI@H2I(H ...A0@1>YI@# /etc/profile # System wide environment and startup programs, for login setup # Functions and aliases go in /etc/bashrc pathmunge () { if ! echo $PATH | /bin/egrep -q "(^|:)$1($|:)" ; then if [ "$2" = "after" ] ; then PATH=$PATH:$1 else PATH=$1:$PATH fi fi } # Path manipulation if [ `id -u` = 0 ]; then pathmunge /sbin pathmunge /usr/sbin pathmunge /usr/local/sbin fi pathmunge /usr/X11R6/bin after unset pathmunge # No core files by default ulimit -S -c 0 > /dev/null 2>&1 USER="`id -un`" LOGNAME=$USER MAIL="/var/spool/mail/$USER" HOSTNAME=`/bin/hostname` HISTSIZE=1000 if [ -z "$INPUTRC" -a ! -f "$HOME/.inputrc" ]; then INPUTRC=/etc/inputrc fi export PATH USER LOGNAME MAIL HOSTNAME HISTSIZE INPUTRC for i in /etc/profile.d/*.sh ; do if [ -r "$i" ]; then . $i fi done unset i JpW@M;kR>eI@@#!/bin/sh # nohup -- run a command immume to hangups, with output to a non-tty # Copyright (C) 1991, 1997, 1999, 2000, 2002 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software Foundation, # Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ # Written by David MacKenzie . usage="Usage: $0 COMMAND [ARG]... or: $0 OPTION" usage_try=" Try \`$0 --help' for more information." usage_help="Run COMMAND, ignoring hangup signals. --help display this help and exit --version output version information and exit Report bugs to ." if [ $# -eq 0 ]; then echo >&2 "$usage" echo >&2 "$usage_try" exit 127 fi fail=0 case $# in 1 ) case "z${1}" in z--help ) echo "$usage" || fail=127; echo "$usage_help" || fail=127 exit $fail;; z--version ) echo "nohup (GNU coreutils) 4.5.3" || fail=127 exit $fail;; * ) ;; esac ;; * ) ;; esac trap "" 1 # Redirect stdout if the user didn't already do it. if [ -t 1 ]; then oldmask=`umask`; umask 077 # If we cannot write to the current directory, use the home directory. if exec >> nohup.out; then echo "nohup: appending output to \`nohup.out'" >&2 elif exec >> "$HOME/nohup.out"; then echo "nohup: appending output to \`$HOME/nohup.out'" >&2 else echo "nohup: cannot append to either \`nohup.out' or \`$HOME/nohup.out'" \ >&2 exit 127 fi umask $oldmask fi # Redirect stderr if the user didn't already do it. if [ -t 2 ]; then exec 2>&1 fi exec "$@" Q0kR>0kR>eI@kkkkkF:kR>:kR>eI@(kkkk 8:kR>:kR>eI@ kkkkkkkk`q:kR>:kR>eI@@kkk@);kR>;kR>eI@kkkk;;kR>;kR>eI@ kkkkkkW:kR>:kR>eI@0rksktkukvkwkxkykzk{k|k}k~kX:kR>:kR>eI@hnkokpkqk7pW@;kR>eI@ kklkmk(;kR>;kR>eI@fkgkhkikjkA:kR>:kR>eI@(rent process. Report bugs to ." fail=0 case $# in 1 ) case "z${1}" in z--help ) echo "$usage" || fail=1; exit $fail;; z--version ) echo "groups (GNU coreutils) 4.5.3" || fail=1; exit $fail;; * ) ;; esac ;; * ) ;; esac if [ $# -eq 0 ]; then id -Gn fail=$? else for name in "$@"; do groups=`id -Gn -- $name` status=$? if test $status = 0; then echo $name : $groups else fail=$status fi done fi exit $fail  c70c16b62b0db2c2db, , , ,\ (4, (,Lhf4957d10310bb42129c25d8!!!!!!!!!!!!!!!!!!!'pW@1>TI@#!/bin/sh exec grep -F ${1+"$@"} !V@1>TI@#!/bin/sh exec grep -E ${1+"$@"} !pW@1>TI@R!S!T!U!V!W!X!Y!Z![!\!]!^!_!`!a!b!c!d!e!f!g!h!i!j!k!l!m!n!o!p!q!r!s!t!u!v!w!x!y!z!{!|!}!~!!!!!!!!!!!!!!!!!!!!!!!!!!!!}1>1>TI@@#! /bin/sh # igawk --- like gawk but do @include processing # # Arnold Robbins, arnold@gnu.org, Public Domain # July 1993 if [ "$1" = debug ] then set -x shift else # cleanup on exit, hangup, interrupt, quit, termination trap 'rm -f /tmp/ig.[se].$$' 0 1 2 3 15 fi while [ $# -ne 0 ] # loop over arguments do case $1 in --) shift; break;; -W) shift set -- -W"$@" continue;; -[vF]) opts="$opts $1 '$2'" shift;; -[vF]*) opts="$opts '$1'" ;; -f) echo @include "$2" >> /tmp/ig.s.$$ shift;; -f*) f=`echo "$1" | sed 's/-f//'` echo @include "$f" >> /tmp/ig.s.$$ ;; -?file=*) # -Wfile or --file f=`echo "$1" | sed 's/-.file=//'` echo @include "$f" >> /tmp/ig.s.$$ ;; -?file) # get arg, $2 echo @include "$2" >> /tmp/ig.s.$$ shift;; -?source=*) # -Wsource or --source t=`echo "$1" | sed 's/-.source=//'` echo "$t" >> /tmp/ig.s.$$ ;; -?source) # get arg, $2 echo "$2" >> /tmp/ig.s.$$ shift;; -?version) echo igawk: version 1.0 1>&2 gawk --version exit 0 ;; -[W-]*) opts="$opts '$1'" ;; *) break;; esac shift done if [ ! -s /tmp/ig.s.$$ ] then if [ -z "$1" ] then echo igawk: no program! 1>&2 exit 1 else echo "$1" > /tmp/ig.s.$$ shift fi fi # at this point, /tmp/ig.s.$$ has the program gawk -- ' # process @include directives function pathto(file, i, t, junk) { if (index(file, "/") != 0) return file for (i = 1; i <= ndirs; i++) { t = (pathlist[i] "/" file) if ((getline junk < t) > 0) { # found it close(t) return t } } return "" } BEGIN { path = ENVIRON["AWKPATH"] ndirs = split(path, pathlist, ":") for (i = 1; i <= ndirs; i++) { if (pathlist[i] == "") pathlist[i] = "." } stackptr = 0 input[stackptr] = ARGV[1] # ARGV[1] is first file for (; stackptr >= 0; stackptr--) { while ((getline < input[stackptr]) > 0) { if (tolower($1) != "@include") { print continue } fpath = pathto($2) if (fpath == "") { printf("igawk:%s:%d: cannot find %s\n", input[stackptr], FNR, $2) > "/dev/stderr" continue } if (! (fpath in processed)) { processed[fpath] = input[stackptr] input[++stackptr] = fpath # push onto stack } else print $2, "included in", input[stackptr], "already included in", processed[fpath] > "/dev/stderr" } close(input[stackptr]) } }' /tmp/ig.s.$$ > /tmp/ig.e.$$ eval gawk -f /tmp/ig.e.$$ $opts -- "$@" exit $?  1>1>TI@L!M!N!`*V@;kR>TI@gawk tohcdebugsetgetHH,HH HH,HH@p HI,D HI 8 HI, HI HI,HI (H&I,H&I H8# /etc/csh.login # System wide environment and startup programs, for login setup if ($?PATH) then setenv PATH "${PATH}:/usr/X11R6/bin" else setenv PATH "/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin" endif limit coredumpsize unlimited setenv HOSTNAME `/bin/hostname` set history=1000 if ( -f $HOME/.inputrc ) then setenv I#E@J/dev/null 2>&1 || : pre-remove sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -S >/dev/null 2>&1 || : alias usb-controller usb-uhci V@C@XI@I!I ( I"I, I"I , I#I, I#I P I$I,$ I$I `# /etc/profile.d/lang.csh - set i18n stuff set sourced=0 foreach file (/etc/sysconfig/i18n $HOME/.i18n) if ( -f $file ) then eval `grep -v '^[:blank:]*#' $file | sed 's|\([^=]*\)=\([^=]*\)|setenv \1 \2|g' | sed 's|$|;|'` endif set sourced=1 end if ($?GDM_LANG) then set sourced=1 setenv LANG $GDM_LANG if ($?LANGUAGE) then unsetenv LANGUAGE endif if ("$GDM_LANG" == "zh_CN.GB18030") then setenv LANGUAGE "zh_CN.GB18030:zh_CN.GB2312:zh_CN" endif endif if ($sourced == 1) then if ($?LC_ALL && $?LANG) then if ($LC_ALL == $LANG) then unsetenv LC_ALL endif endif if ($?LINGUAS && $?LANG) then if ($LINGUAS == $LANG) then unsetenv LINGUAS endif endif if ($?CHARSET) then switch ($CHARSET) case 8859-1: case 8859-2: case 8859-5: case 8859-15: case koi*: case latin2*: if ( $?TERM ) then if ( "$TERM" == "linux" ) then if ( `/sbin/consoletype` == "vt" ) then /bin/echo -n -e '\033(K' >/dev/tty endif endif endif breaksw endsw endif if ($?SYSFONTACM) then switch ($SYSFONTACM) case iso01*: case iso02*: case iso05*: case iso15*: case koi*: case latin2-ucw*: if ( $?TERM ) then if ( "$TERM" == "linux" ) then if ( `/sbin/consoletype` == "vt" ) then /bin/echo -n -e '\033(K' > /dev/tty endif endif endif breaksw endsw endif if ($?LANG) then switch ($LANG) case *.utf8*: case *.UTF-8*: if ( $?TERM ) then if ( "$TERM" == "linux" ) then if ( `/sbin/consoletype` == "vt" ) then if ( $?SYSFONTACM ) then unicode_start $SYSFONT $SYSFONTACM else unicode_start $SYSFONT endif endif endif endif breaksw endsw endif unsetenv SYSFONTACM unsetenv SYSFONT endif if ($?LANG) then switK @ho>YI@# Initialization script for bash and sh # export AFS, if you are in AFS environment alias which='alias | /usr/bin/which --tty-only --read-alias --show-dot --show-tilde'  W@H2>YI@# color-ls initialization COLORS=/etc/DIR_COLORS [ -e "/etc/DIR_COLORS.$TERM" ] && COLORS="/etc/DIR_COLORS.$TERM" [ -e "$HOME/.dircolors" ] && COLORS="$HOME/.dircolors" [ -e "$HOME/.dircolors.$TERM" ] && COLORS="$HOME/.dircolors.$TERM" [ -e "$HOME/.dir_colors" ] && COLORS="$HOME/.dir_colors" [ -e "$HOME/.dir_colors.$TERM" ] && COLORS="$HOME/.dir_colors.$TERM" [ -e "$COLORS" ] || return eval `dircolors --sh "$COLORS"` [ -z "$LS_COLORS" ] && return if ! egrep -qi "^COLOR.*none" $COLORS >/dev/null 2>/dev/null ; then alias ll='ls -l --color=tty' 2>/dev/null alias l.='ls -d .* --color=tty' 2>/dev/null alias ls='ls --color=tty' 2>/dev/null else alias ll='ls -l' 2>/dev/null alias l.='ls -d .*' 2>/dev/null fi pW@4kR>YI@# color-ls initialization set COLORS=/etc/DIR_COLORS if ($?TERM) then test -e "/etc/DIR_COLORS.$TERM" && set COLORS="/etc/DIR_COLORS.$TERM" endif test -f ~/.dircolors && set COLORS=~/.dircolors if ($?TERM) then test -f "~/.dircolors.$TERM" && set COLORS="~/.dircolors.$TERM" endif test -f ~/.dir_colors && set COLORS=~/.dir_colors if ($?TERM) then test -f "~/.dir_colors.$TERM" && set COLORS="~/.dir_colors.$TERM" endif test -e "$COLORS" || exit eval `dircolors -c $COLORS` if ( "$LS_COLORS" == '' ) then exit endif egrep -qi "^COLOR.*none" $COLORS if ( $? != 0 ) then alias ll 'ls -l --color=tty' alias l. 'ls -d .* --color=tty' alias ls 'ls --color=tty' else alias ll 'ls -l' alias l. 'ls -d .*' endif 1vpW? >~|SSSS,SSSS,SS0XSS,,SSSS,SSlSS,@SS4 SS, SS SS, SS SS,l SS\ SS,0 SS( SS, SS SS, SS SS, SS ` SS,4 SS$ SS, SSD SS, SSt SS,H SS < SS, SS SS, SS SS, SSx SS,L SS4 SS, SS SS, SS SS, SSp SS,D SS P^v#!/bin/sh # groups -- print the groups a user is in # Copyright (C) 1991, 1997, 2000, 2002 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software Foundation, # Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ # Written by David MacKenzie . # Make sure we get GNU id, if possible; also allow # it to be somewhere else in PATH if not installed yet. PATH=/usr/bin:$PATH usage="Usage: $0 [OPTION]... [USERNAME]... --help display this help and exit --version output version information and exit Same as id -Gn. If no USERNAME, use cur@0kR>eI@`kakbkckdk@:kR>:kR>eI@([k\k]k^k_k\F:kR>:kR>eI@(UkVkWkXkYkZkXY;kR>;kR>eI@0OkPkQkRkSkTkQ9`@;kR>eI@0KkLkMkNk8:kR>:kR>eI@ ../../bin/env z[@eI@eI@CkDkEkFkGkHkIkJk{:kR>:kR>eI@@@kAkBk`+;kR>;kR>eI@;kk?kLpW@:kR>eI@(*k+k,k-k.k/k0k1k2k3k4k5k6k7k8k9k:kT:kR>:kR>eI@../../bin/cut z[@eI@eI@"k#k$k%k&k'k(k)kxw:kR>:kR>eI@@kk k!k<2:kR>:kR>eI@ kkkkkTL:kR>:kR>eI@(test@eI@eI@../../bin/gawkz[@eI@eI@../../bin/gawkV@eI@eI@kkk.YN@1>eI@ k k k k kkkkkkkkkT@1>eI@hkkkkk`Jž1>ž1>eI@(jjjjjjjjjjjjjjjjjjjjjjjjjjjjkkkkž1>ž1>eI@jjjjjjjjjjjjs^>s^>eI@`jjjj612>12>eI@ jjjjHJ xHJ,LHJ dH# Configuration file for the color ls utility # This file goes in the /etc directory, and must be world readable. # You can copy this file to .dir_colors in your $HOME directory to override # the system defaults. # COLOR needs one of these arguments: 'tty' colorizes output to ttys, but not # pipes. 'all' adds color characters to all output. 'none' shuts colorization # off. COLOR tty # Extra command line options for ls go here. # Basically these ones are: # -F = show '/' for dirs, '*' for executables, etc. # -T 0 = don't trust tab spacing when formatting ls output. OPTIONS -F -T 0 # Below, there should be one TERM entry for each termtype that is colorizable TERM linux TERM console TERM con132x25 TERM con132x30 TERM con132x43 TERM con132x60 TERM con80x25 TERM con80x28 TERM con80x30 TERM con80x43 TERM con80x50 TERM con80x60 TERM cons25 TERM xterm TERM rxvt TERM xterm-color TERM color-xterm TERM vt100 TERM dtterm TERM color_xterm TERM ansi TERM screen # EIGHTBIT, followed by '1' for on, '0' for off. (8-bit output) EIGHTBIT 1 # Below are the color init strings for the basic file types. A color init # string consists of one or more of the following numeric codes: # Attribute codes: # 00=none 01=bold 04=underscore 05=blink 07=reverse 08=concealed # Text color codes: # 30=black 31=red 32=green 33=yellow 34=blue 35=magenta 36=cyan 37=white # Background color codes: # 40=black 41=red 42=green 43=yellow 44=blue 45=magenta 46=cyan 47=white NORMAL 00 # global default, although everything shou pW@4kR>ZI@# Configuration file for the color ls utility # This file goes in the /etc directory, and must be world readable. # You can copy this file to .dir_colors in your $HOME directory to override # the system defaults. # COLOR needs one of these arguments: 'tty' colorizes output to ttys, but not # pipes. 'all' adds color characters to all output. 'none' shuts colorization # off. COLOR tty # Extra command line options for ls go here. # Basically these ones are: # -F = show '/' for dirs, '*' for executables, etc. # -T 0 = don't trust tab spacing when formatting ls output. OPTIONS -F -T 0 # Below, there should be one TERM entry for each termtype that is colorizable TERM linux TERM console TERM con132x25 TERM con132x30 TERM con132x43 TERM con132x60 TERM con80x25 TERM con80x28 TERM con80x30 TERM con80x43 TERM con80x50 TERM con80x60 TERM cons25 TERM xterm TERM rxvt TERM xterm-color TERM color-xterm TERM vt100 TERM dtterm TERM color_xterm # EIGHTBIT, followed by '1' for on, '0' for off. (8-bit output) EIGHTBIT 1 # Below are the color init strings for the basic file types. A color init # string consists of one or more of the following numeric codes: # Attribute codes: # 00=none 01=bold 04=underscore 05=blink 07=reverse 08=concealed # Text color codes: # 30=black 31=red 32=green 33=yellow 34=blue 35=magenta 36=cyan 37=white # Background color codes: # 40=black 41=red 42=green 43=yellow 44=blue 45=magenta 46=cyan 47=white NORMAL 00 # global default, although everything should be something. FILE 00 # normal file DIR 00;34 # directory LINK 00;36 # symbolic link FIFO 40;33 # pipe SOCK 00;35 # socket BLK 40;33;01 # block device driver CHR 40;33;01 # character device driver ORPHAN 01;05;37;41 # orphaned syminks MISSING 01;05;37;41 # ... and the files they point to # This is for files with execute permission: EXEC 00;32 # List any file extensions like '.gz' or '.tar' that you would like ls # to colorize below. Put the extension, a space, and the color init string. # (and any comments you want to add after a '#') .cmd 00;32 # executables (bright green) .exe 00;32 .com 00;32 .btm 00;32 .bat 00;32 .sh 00;32 .csh 00;32 .tar 00;31 # archives or compressed (bright red) .tgz 00;31 .arj 00;31 .taz 00;31 .lzh 00;31 .zip 00;31 .z 00;31 .Z 00;31 .gz 00;31 .bz2 00;31 .bz 00;31 .tz 00;31 .rpm 00;31 .cpio 00;31 .jpg 00;35 # image formats .gif 00;35 .bmp 00;35 .xbm 00;35 .xpm 00;35 .png 00;35 .tif 00;35  A~3WwpKWX R,|R0LR, R0R,R0R,hRR,R<RRjRRxRRRsJMRRRRRRi$RRJ&RRx.RRp7/RuJ`?RPzVRR@Y^RR0 ^RR(\#dRRpnRRinstall.log.syslog.bash_profile.cshrcanaconda-ks.cfg.Xresources.bash_history.Xclients.tcshrcupgrade.log.syslog.bash_logoutupgrade.log.bashrcinstall.log.ssh...ApW@AW@AW@R( ...A0)@1>cI@R( ...A0)@1>cI@R( ...A0)@6>cI@KP H #KR@ &KAP8 Y)KO0 KO KO cKO KP KO KP KO |KO KO wKR |c KO 2K Ph KOP BKO@ ݦKO0 +#K>P KO KO QdKO KO KO 1KO #KR q$KeR  %KP  &KOx &KOh CA'K PX }(KOH U*KO0 !-K P `.KP 2.KO }V/KP;s5KOK7KP^f9KOi9KO:KOs^=K:Px[ >KKp?K=PX+AKOHAKO8WCK;P xCKOZCKOdFK P `LKOOKOzTK P]VKOYKOk[KOx\KOh ^KOPD^KP@t_KO0_KRU`KO]bKObKO@cKOeKOfKO|gKO?jKP@IoKOxyoKO`VdrK?PP rKO@rK@P0sKO %sKYI@# less initialization script (sh) [ -x /usr/bin/lesspipe.sh ] && export LESSOPEN="|/usr/bin/lesspipe.sh %s" if [ x`echo $LANG | cut -b 1-2` = x"ja" ]; then export JLESSCHARSET=japanese; elif [ x`echo $LANG | cut -b 1-2` = x"ko" ]; then export JLESSCHARSET=ko; fi  sW@?>YI@# less initialization script (csh) if ( -x /usr/bin/lesspipe.sh ) then setenv LESSOPEN "|/usr/bin/lesspipe.sh %s" endif if ( $?LANG ) then if ( `echo $LANG | cut -b 1-2` == "ja" ) then setenv JLESSCHARSET japanese else if ( `echo $LANG | cut -b 1-2` == "ko" ) then setenv JLESSCHARSET ko endif endif =@?>YI@## This caused GLib2 applications to convert filenames from ## locale encoding to UTF-8. If the locale encoding is already ## UTF-8 then it makes no difference. export G_BROKEN_FILENAMES=1pW@D=>YI@ ## This caused GLib2 applications to convert filenames from ## locale encoding to UTF-8. If the locale encoding is already ## UTF-8 then it makes no difference. setenv G_BROKEN_FILENAMES 1 @D=>YI@A$TAMARACKEthernetA004743118001! ?UM]F&Q0Uo2>o2>XI@PCMCIARS-COM 2P!a0 aPX a`hVo2>o2>XI@#KTIPE520 PLUSPCMCIA Ethernet a!  Ue0Jo2>o2>XI@PMX PE-200ETHERNETR01!UQ0Do2>o2>XI@LINKSYSPCMLM28 C!/Ua0 a  a@ a` a a  a@ a` a a  a@ a`o2>o2>XI@PCMCIAEthernet!  Ue06o2>o2>XI@"MultiTechPCMCIA 56K DataFax !'gAUUU`(```ko2>o2>XI@SS8 !9Allied Telesis,K.KEthernet LAN CardCentreCOMLA-PCM `` `@```````` `@``````o2>o2>XI@LINKSYSE-CARD UQ05o2>o2>XI@)Multifunction CardNSC MF LAN/Modem u! IjCIS! w yUe0(@CIS!@w U#0o2>o2>XI@ADVANTECHCOMpad-32/85B-4! `@0`@Lo2>o2>XI@ADVANTECHCOMpad-32/851.0!a0`0`@`P``mo2>o2>XI@,3ComMegahertz 3CXEM556LAN + 56k Modem 5! LiCIS!c Ud0CIS!' c U#0 E܉$(L@DI$Ia I%I,I%I 3I4I,3I4I 3I5I,3I5I 3I6I,3I6I ;I62>YI@# .bashrc # User specific aliases and functions # Source global definitions if [ -f /etc/bashrc ]; then . /etc/bashrc fi |d@H>YI@# .bash_profile # Get the aliases and functions if [ -f ~/.bashrc ]; then . ~/.bashrc fi # User specific environment and startup programs PATH=$PATH:$HOME/bin export PATH unset USERNAME d@H>YI@# ~/.bash_logout clear d@H>YI@# /etc/profile.d/lang.sh - set i18n stuff sourced=0 for langfile in /etc/sysconfig/i18n $HOME/.i18n ; do [ -f $langfile ] && . $langfile && sourced=1 done if [ -n "$GDM_LANG" ]; then sourced=1 LANG="$GDM_LANG" unset LANGUAGE if [ "$GDM_LANG" = "zh_CN.GB18030" ]; then export LANGUAGE="zh_CN.GB18030:zh_CN.GB2312:zh_CN" fi fi if [ "$sourced" = 1 ]; then [ -n "$LANG" ] && export LANG || unset LANG [ -n "$LC_ADDRESS" ] && export LC_ADDRESS || unset LC_ADDRESS [ -n "$LC_CTYPE" ] && export LC_CTYPE || unset LC_CTYPE [ -n "$LC_COLLATE" ] && export LC_COLLATE || unset LC_COLLATE [ -n "$LC_IDENTIFICATION" ] && export LC_IDENTIFICATION || unset LC_IDENTIFICATION [ -n "$LC_MEASUREMENT" ] && export LC_MEASUREMENT || unset LC_MEASUREMENT [ -n "$LC_MESSAGES" ] && export LC_MESSAGES || unset LC_MESSAGES [ -n "$LC_MONETARY" ] && export LC_MONETARY || unset LC_MONETARY [ -n "$LC_NAME" ] && export LC_NAME || unset LC_NAME [ -n "$LC_NUMERIC" ] && export LC_NUMERIC || unset LC_NUMERIC [ -n "$LC_PAPER" ] && export LC_PAPER || unset LC_PAPER [ -n "$LC_TELEPHONE" ] && export LC_TELEPHONE || unset LC_TELEPHONE [ -n "$LC_TIME" ] && export LC_TIME || unset LC_TIME if [ -n "$LC_ALL" ]; then if [ "$LC_ALL" != "$LANG" ]; then export LC_ALL else unset LC_ALL fi else unset LC_ALL fi [ -n "$LANGUAGE" ] && export LANGUAGE || unset LANGUAGE if [ -n "$LINGUAS" ]; then if [ "$LINGUAS" != "$LANG" ]; then export LINGUAS else unset LINGUAS fi else unset LINGUAS fi [ -n "$_XKB_CHARSET" ] && export _XKB_CHARSET || unset _XKB_CHARSET if [ -n "$CHARSET" ]; then case $CHARSET in 8859-1|8859-2|8859-5|8859-15|koi*) if [ "$TERM" = "linux" -a "`/sbin/consoletype`" = "vt" ]; then echo -n -e '\033(K' 2>/dev/null > /proc/$$/fd/0 fi ;; esac elif [ -n "$SYSFONTACM" ]; then case $SYSFONTACM in iso01*|iso02*|iso05*|iso15*|koi*|latin2-ucw*) if [ "$TERM" = "linux" -a "`/sbin/consoletype`" = "vt" ]; then echo -n -e '\033(K' 2>/dev/null > /proc/$$/fd/0 fi ;; esac fi if [ -n "$LANG" ]; then case $LANG in *.utf8*|*.UTF-8*) if [ "$TERM" = "linux" -a "`/sbin/consoletype`" = "vt" ]; then unicode_start $SYSFONT $SYSFONTACM fi ;; esac fi unset SYSFONTACM SYSFONT fi unset sourced unset langfile  pW@ho>YI@ch ($LANG) case ja*UTF-8: case zh*UTF-8: case ko*UTF-8: set dspmbyte=utf8 breaksw case zh_TW*: set dspmbyte=big5 breaksw case ja*: case ko*: case zh*: set dspmbyte=euc breaksw endsw endif HH,HH (HH,HH hHH,<HH4HH,HH @ HH, HH XD HH, HHp HH,D HH ` HH, HH  HH,t HH HH,HH PxHH,LHH PHH,HH 0HH,tHH `HH,HH 0HH,HH pHH,HH,HH P\HH,0HH PHvJ,HvJ X\HvJ XXqp  q ȴ qany any host 192.168.0.254 dev eth0 any net 0.0.0.0 netmask 0.0.0.0 gw 192.168.0.254 Qmc@^@^@INSTALLMETHOD=cd >\@C@XI@USEDB=no USEHESIOD=no USELDAP=no USENIS=no USEKERBEROS=no USELDAPAUTH=no USEMD5=yes USESHADOW=yes USESMBAUTH=no pC@C@XI@ZONE="America/New_York" UTC=false ARC=false ,@C@XI@NETWORKING=yes HOSTNAME=localhost.localdomain FORWARD_IPV4=false HOSTNAME=uml-test.goober.org ^V@^@^@KEYBOARDTYPE="pc" KEYTABLE="us" KEYTABLE= *V@^@^@LANG="en_US.UTF-8" SUPPORTED="en_US.UTF-8:en_US:en" SYSFONT="latarcyrheb-sun16" PpW@C@XI@INSTALLMETHOD=cdrom ISOSTATUS=0 MEDIASUM=e4db359dbb5cdd2b215059ce70f251a5 JE@E@XI@- class: HD bus: SCSI detached: 0 device: sda driver: ignore desc: "Linux scsi_debug" host: 0 id: 0 channel: 0 lun: 0 generic: sg0 - class: KEYBOARD bus: KEYBOARD detached: 0 device: ttyS0 driver: ignore desc: "Serial console (38400 baud) ttyS0" - class: NETWORK bus: PCI detached: 1 device: eth driver: pcnet32 desc: "Advanced Micro Devices [AMD]|79c970 [PCnet32 LANCE]" vendorId: 1022 deviceId: 2000 subVendorId: 1022 subDeviceId: 2000 pciType: 1 - class: MOUSE bus: PSAUX detached: 1 device: psaux driver: msintellips/2 desc: "Generic PS/2 Wheel Mouse" - class: AUDIO bus: PCI detached: 1 driver: es1371 desc: "Ensoniq|ES1371 [AudioPCI-97]" vendorId: 1274 deviceId: 1371 subVendorId: 1274 subDeviceId: 1371 pciType: 1 - class: USB bus: PCI detached: 1 driver: usb-uhci desc: "Intel Corp.|82371AB/EB/MB PIIX4 USB" vendorId: 8086 deviceId: 7112 subVendorId: 15ad subDeviceId: 1976 pciType: 1 }Y@Y@Y@DAEMON=yes QUEUE=1h \@Z>XI@FULLNAME="Generic - Wheel Mouse (PS/2)" MOUSETYPE="imps2" XEMU3="no" XMOUSETYPE="IMPS/2" Y\@C@XI@HHHH50HHiHHxMHHpAvHH`up2date-uuidup2dateup2date-keyring.gpgrhnsd...A@C@XI@# Additional options for gpm (e.g. acceleration), device OPTIONS="" DEVICE="/dev/mouse" X\@^Z8>XI@IRDA=yes DEVICE=/dev/ttyS2 #DONGLE=actisys+ DISCOVERY=yes : 2> 2>XI@d+e+ÝZ>ÝZ>XI@# devlabel configuration file # # This file should generally not be edited by hand. # Instead, use the /sbin/devlabel program to make changes. # devlabel by Gary Lerhaupt # # format: # or format: V@6>XI@PCMCIA=no PCIC= PCIC_OPTS= CORE_OPTS= &V@C@XI@ UT]hUZ],<UZ] Uh],x Uh] Uv], Uv] U}],U}]defghijklmnopqrstuvwxyz{|}~¡áġšơǡȡɡʡˡ̡͡ΡϡСѡҡӡԡա֡סء١ڡۡܡݡޡߡ  !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~¢âĢŢƢǢȢɢʢˢ̢͢΢ϢТѢҢӢԢբ֢עآ٢ڢۢܢݢޢߢ  !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abc]sW@B@I@0Uv]UU <]E]O v]|]xv]z]hJJ/v]x]Xɨ>UUH>UU8rIv]y]( bv]w].hUU#r<]C]sUUxv]{]LC_MONETARYLC_PAPERLC_CTYPELC_COLLATELC_IDENTIFICATIONLC_MESSAGESLC_NUMERICLC_MEASUREMENTLC_ADDRESSLC_TELEPHONELC_TIMELC_NAME...A)@B@yI@Uh]UU h]r]O h]u]xh]p]hJJ/h]j]Xɨ>h]o]H>h]s]8rIh]m]( bh]i].hh]k]#rh]l]sh]t]xh]q]LC_MONETARYLC_PAPERLC_CTYPELC_COLLATELC_IDENTIFICATIONLC_MESSAGESLC_NUMERICLC_MEASUREMENTLC_ADDRESSLC_TELEPHONELC_TIMELC_NAME...A)@B@yI@UZ]UU Z]d]O Z]g]xZ]b]hJJ/Z]\]Xɨ>Z]a]H>Z]e]8rIZ]_]( bZ][].hZ]]]#rZ]^]sZ]f]xZ]c]LC_MONETARYLC_PAPERLC_CTYPELC_COLLATELC_IDENTIFICATIONLC_MESSAGESLC_NUMERICLC_MEASUREMENTLC_ADDRESSLC_TELEPHONELC_TIMELC_NAME...A)@B@yI@UT]UU T]V]O T]Y]xT]X]hJJ/UUXɨ>UUH>UU8rIT]U]( bT]W].hUU#rUUsUUxWWLC_MONETARYLC_PAPERLC_CTYPELC_COLLATELC_IDENTIFICATIONLC_MESSAGESLC_NUMERICLC_MEASUREMENTLC_ADDRESSLC_TELEPHONELC_TIMELC_NAME...5 DžL]@^]A^,]A^]B^,]B^]C^,d]C^\]D^,0]D^(]E^,]E^]F^,]F^ ]G^,]G^X8]H^, ]H^ ]I^, ]I^ ]J^, ]J^ ]K^,d ]K^ X ]L^,, ]L^D ]M^, ]M^ ]N^, ]N^ ]O^,T ]O^L ]P^, ]P^ ]Q^, ]Q^ ]R^, ]R^,| ]S^,P ]S^8 ]T^, ]T^D ]U^, ]U^@]V^,]V^8t]W^,H]W^`]X^,]X^xD]Y^,]Y^,^^,^^0^^,D^^^U^(^V_x^^p^_h^@_`0^B_XN^J_P@L^k_HbE^^8^=_(^^ v^^/^"^A_(^>_libusermodule.sokudzu.pyc_snackmodule.soREADMExf86config.pyjapanese.pthrpmdboptikOpenSSLkudzu.pyrhplidlerhn...A )@C@I@&q>&q>I@X &q>&q>I@}&q>&q>I@H&q>&q>I@pT&q>&q>I@JKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~&q>&q>I@DEFGHI0RpW@C@I@09:;<=>?@ABCcC@Pq>I@X56788&q>&q>I@ 12348&q>&q>I@ /0L&q>&q>I@-.x&q>&q>I@+,H&q>&q>I@ !"#$%&'()*&q>&q>I@,&q>&q>I@&q>&q>I@#&q>&q>I@9&q>&q>I@  \Z&q>&q>I@x&&q>&q>I@d&q>&q>I@&q>&q>I@&q>&q>I@&q>&q>I@ &q>&q>I@ Ϗj˒gv~ߟR/Si P R0S,$ R0S  R1S, R1S4 R2S, R2S R3S,R3SR4S,\R4S 8$˔(#!/bin/bash . /etc/init.d/functions cd /etc/sysconfig/\@*aH>dI@WcXcYcZc[c\cZV@jo>dI@0ELF44 (444  /lib/ld-linux.so.2GNUy&. Ђ<܄@ libc.so.6ioctlputs__fxstat_IO_stdin_used__libc_start_main__gmon_start__GLIBC_2.0ii OU 5%%h%h%h%h1^PTRhdh4QVhUSP[tЋ]ÐU=u)tҡuÉUؕtt hؕw|ÐUE ED$D$$UE%t -w$]ÉD$TED$$x$1$u븐UVS:-19sƐC9r[^USP-Xu ]6KuUSRȕȕt ЋuX[USR[V]ptyvtserialԕ x (ȁX Y ܕ XPo0oo"Ƃւconsoletype.debug".shstrtab.interp.note.ABI-tag.hash.dynsym.dynstr.gnu.version.gnu.version_r.rel.dyn.rel.plt.init.text.fini.rodata.eh_frame.data.dynamic.ctors.dtors.jcr.got.bss.gnu_debuglink  !((0' XXp/ȁY7o""Do00 S PP\ XX  exx`Pkqw؄ ȕЕؕܕ  sW@jo>dI@IcJcKcLcMcNcOcPcQcRcScTcUc8Z>Z>dI@hFcGcHc "Z>Z>dI@ase "$KERNEL_TYPE" in -smp) SMP='1';; -enterprise) ENTERPRISE='1';; -bigmem) BIGMEM='1';; *) UP='1';; esac cat > /boot/kernel.h << EOF /* This file is automatically generated at boot time. */ #ifndef __BOOT_KERNEL_H_ #define __BOOT_KERNEL_H_ /* Kernel type $KERNEL_ARCH$KERNEL_TYPE */ #ifndef __MODULE_KERNEL_$KERNEL_ARCH #define __MODULE_KERNEL_$KERNEL_ARCH 1 #endif #ifndef __BOOT_KERNEL_ENTERPRISE #define __BOOT_KERNEL_ENTERPRISE $ENTERPRISE #endif #ifndef __BOOT_KERNEL_BIGMEM #define __BOOT_KERNEL_BIGMEM $BIGMEM #endif #ifndef __BOOT_KERNEL_SMP #define __BOOT_KERNEL_SMP $SMP #endif #ifndef __BOOT_KERNEL_UP #define __BOOT_KERNEL_UP $UP #endif #endif EOF fi T69@9Y/JHJA HJ,HJ HJ,HJ |H&J,PH&JHH(J, H(J H)J, H)J H*J,d H*JT H+J,( H+J H,J, H,J H-J, H-J H.J,t H.Jd H/J,8 H/J( H0J, H0J, H6J, H6JP H8J, H8J H9J,H9J , , ,,,,,,,,,,,,,,,,,,, ,!,",#,$,%,&,',(,),*,+,,,-,.,/,0,1,2,3,4,5,6,7,8,9,:,;,<,=,>,?,@,A,B,C,D,E,F,G,H,I,J,K,L,M,N,O,P,Q,R,S,T,U,V,W,X,Y,Z,[,\,],^,_,`,a,b,c,d,e,f,g,h,i,j,k,l,m,n,o,p,q,r,s,t,u,v,w,x,y,z,{,|,},~,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,D ZW@h92>YI@# *REQUIRED* # Directory where mailboxes reside, _or_ name of file, relative to the # home directory. If you _do_ define both, MAIL_DIR takes precedence. # QMAIL_DIR is for Qmail # #QMAIL_DIR Maildir MAIL_DIR /var/spool/mail #MAIL_FILE .mail # Password aging controls: # # PASS_MAX_DAYS Maximum number of days a password may be used. # PASS_MIN_DAYS Minimum number of days allowed between password changes. # PASS_MIN_LEN Minimum acceptable password length. # PASS_WARN_AGE Number of days warning given before a password expires. # PASS_MAX_DAYS 99999 PASS_MIN_DAYS 0 PASS_MIN_LEN 5 PASS_WARN_AGE 7 # # Min/max values for automatic uid selection in useradd # UID_MIN 500 UID_MAX 60000 # # Min/max values for automatic gid selection in groupadd # GID_MIN 500 GID_MAX 60000 # # If defined, this command is run when removing a user. # It should remove any at/cron/print jobs etc. owned by # the user to be removed (passed as the first argument). # #USERDEL_CMD /usr/sbin/userdel_local # # If useradd should create home directories for users by default # On RH systems, we do. This option is ORed with the -m flag on # useradd command line. # CREATE_HOME yes d@J>YI@H6JHH@(6J7J0macros.specspo...AP@C@YI@H0JH{p0J2J, r0J3J,s0J4JAt0J5Jz0J1Jprt_dsfieldrt_tablesrt_scopesrt_realmsrt_protos...A@C@YI@rc.d/rc6.d 6W@YI@YI@rc.d/rc5.d 6W@YI@YI@rc.d/rc4.d 6W@YI@YI@rc.d/rc3.d 6W@YI@YI@rc.d/rc2.d 6W@YI@YI@rc.d/rc1.d 6W@YI@YI@rc.d/rc0.d 6W@YI@YI@rc.d/init.d 6W@YI@YI@H&J@H8Z&J'J0useradd...AH@C@YI@HJH>'JJJ%JP+J#Jev,J Je-J"JtRJ!J|J$Jmta-newaliasesmanmta-newaliasesmta-rmailmta-mailqmta-mailqmanmta-aliasesmanmta...A@C@YI@,,,%sW@E@YI@freebsd-ypxfrd <$P{ з{ ,,,Xt  ,H  4 !, ! ", "0 #,l #X $,, $( %, % &, &p ',D ' 8 (, ( ), ) *, * +,d +L ,, ,D -, - .,p .\ /,0 /40,01,1 2,\2@3,3 4,45,50p6,D6$ 7,7`8,h8 \9,09:,: e;; -[vF]) opts="$opts $1 '$2'"""\&V@;kR>TI@"""""""fV@;kR>TI@8"""\(;kR>;kR>TI@""""""""""""""""""""""""Lu@4kR>TI@""""""""" W@;kR>TI@H""""""""""""@;kR>TI@`""""0V@;kR>TI@ """.;kR>;kR>TI@"""""""gkW@;kR>TI@8"""|)QN@;kR>TI@""""|6V@;kR>TI@ """""""""""""TV@;kR>TI@h"""""FQC@;kR>TI@("""""GYN@;kR>TI@(w"x"y"z"{"|"}"~""""""""""TFW@;kR>TI@q"r"s"t"u"v"VQN@;kR>TI@0n"o"p"*;kR>;kR>TI@k"l"m"\&;kR>;kR>TI@h"i"j"\,C@;kR>TI@e"f"g"|/;kR>;kR>TI@^"_"`"a"b"c"d"o@;kR>TI@8V"W"X"Y"Z"["\"]"4xV@;kR>TI@@L"M"N"O"P"Q"R"S"T"U"ܖV@;kR>TI@PG"H"I"J"K"MsW@;kR>TI@(;"<"=">"?"@"A"B"C"D"E"F"t)@;kR>TI@`6"7"8"9":"TI@(1"2"3"4"5"FV@;kR>TI@(!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!""""""""" " " " " """"""""""""""""""" "!"""#"$"%"&"'"(")"*"+","-"."/"0"&}B>&}B>TI@!!!!8V@;kR>TI@ !!!!!FV@;kR>TI@(!g) ReIsEr2FsMHoM mIJJCDEJbcvcv5b+CZ-+ZB+':0c.{+#:`tZuuZO!yDZ@+ReIsErLBI!I ( I"I, I"I , I#I, I#I P I$I,$ I$I `# /etc/profile.d/lang.csh - set i18n stuff set sourced=0 foreach file (/etc/sysconfig/i18n $HOME/.i18n) if ( -f $file ) then eval `grep -v '^[:blank:]*#' $file | sed 's|\([^=]*\)=\([^=]*\)|setenv \1 \2|g' | sed 's|$|;|'` endif set sourced=1 end if ($?GDM_LANG) then set sourced=1 setenv LANG $GDM_LANG if ($?LANGUAGE) then unsetenv LANGUAGE endif if ("$GDM_LANG" == "zh_CN.GB18030") then setenv LANGUAGE "zh_CN.GB18030:zh_CN.GB2312:zh_CN" endif endif if ($sourced == 1) then if ($?LC_ALL && $?LANG) then if ($LC_ALL == $LANG) then unsetenv LC_ALL endif endif if ($?LINGUAS && $?LANG) then if ($LINGUAS == $LANG) then unsetenv LINGUAS endif endif if ($?CHARSET) then switch ($CHARSET) case 8859-1: case 8859-2: case 8859-5: case 8859-15: case koi*: case latin2*: if ( $?TERM ) then if ( "$TERM" == "linux" ) then if ( `/sbin/consoletype` == "vt" ) then /bin/echo -n -e '\033(K' >/dev/tty endif endif endif breaksw endsw endif if ($?SYSFONTACM) then switch ($SYSFONTACM) case iso01*: case iso02*: case iso05*: case iso15*: case koi*: case latin2-ucw*: if ( $?TERM ) then if ( "$TERM" == "linux" ) then if ( `/sbin/consoletype` == "vt" ) then /bin/echo -n -e '\033(K' > /dev/tty endif endif endif breaksw endsw endif if ($?LANG) then switch ($LANG) case *.utf8*: case *.UTF-8*: if ( $?TERM ) then if ( "$TERM" == "linux" ) then if ( `/sbin/consoletype` == "vt" ) then if ( $?SYSFONTACM ) then unicode_start $SYSFONT $SYSFONTACM else unicode_start $SYSFONT endif endif endif endif breaksw endsw endif unsetenv SYSFONTACM unsetenv SYSFONT endif if ($?LANG) then switK @ho>YI@# Initialization script for bash and sh # export AFS, if you are in AFS environment alias which='alias | /usr/bin/which --tty-only --read-alias --show-dot --show-tilde' sW@H2>YI@# color-ls initialization COLORS=/etc/DIR_COLORS [ -e "/etc/DIR_COLORS.$TERM" ] && COLORS="/etc/DIR_COLORS.$TERM" [ -e "$HOME/.dircolors" ] && COLORS="$HOME/.dircolors" [ -e "$HOME/.dircolors.$TERM" ] && COLORS="$HOME/.dircolors.$TERM" [ -e "$HOME/.dir_colors" ] && COLORS="$HOME/.dir_colors" [ -e "$HOME/.dir_colors.$TERM" ] && COLORS="$HOME/.dir_colors.$TERM" [ -e "$COLORS" ] || return eval `dircolors --sh "$COLORS"` [ -z "$LS_COLORS" ] && return if ! egrep -qi "^COLOR.*none" $COLORS >/dev/null 2>/dev/null ; then alias ll='ls -l --color=tty' 2>/dev/null alias l.='ls -d .* --color=tty' 2>/dev/null alias ls='ls --color=tty' 2>/dev/null else alias ll='ls -l' 2>/dev/null alias l.='ls -d .*' 2>/dev/null fi pW@4kR>YI@# color-ls initialization set COLORS=/etc/DIR_COLORS if ($?TERM) then test -e "/etc/DIR_COLORS.$TERM" && set COLORS="/etc/DIR_COLORS.$TERM" endif test -f ~/.dircolors && set COLORS=~/.dircolors if ($?TERM) then test -f "~/.dircolors.$TERM" && set COLORS="~/.dircolors.$TERM" endif test -f ~/.dir_colors && set COLORS=~/.dir_colors if ($?TERM) then test -f "~/.dir_colors.$TERM" && set COLORS="~/.dir_colors.$TERM" endif test -e "$COLORS" || exit eval `dircolors -c $COLORS` if ( "$LS_COLORS" == '' ) then exit endif egrep -qi "^COLOR.*none" $COLORS if ( $? != 0 ) then alias ll 'ls -l --color=tty' alias l. 'ls -d .* --color=tty' alias ls 'ls --color=tty' else alias ll 'ls -l' alias l. 'ls -d .*' endif qi F{>dʓRR)  RR, RR  RR, RR hRR,RR ,RR,RR RR,RR 4RR,RR 0RR,RR ҩhk# .tcshrc # User specific aliases and functions alias rm 'rm -i' alias cp 'cp -i' alias mv 'mv -i' setenv PATH "/usr/local/sbBk9Bk9cI@# .cshrc # User specific aliases and functions alias rm 'rm -i' alias cp 'cp -i' alias mv 'mv -i' setenv PATH "/usr/local/sbin:/usr/sbin:/sbin:${PATH}:${HOME}/bin" set prompt=\[`id -nu`@`hostname -s`\]\#\ nB9nB9cI@# .bashrc # User specific aliases and functions alias rm='rm -i' alias cp='cp -i' alias mv='mv -i' # Source global definitions if [ -f /etc/bashrc ]; then . /etc/bashrc fi sW@{;0cI@# .bash_profile # Get the aliases and functions if [ -f ~/.bashrc ]; then . ~/.bashrc fi # User specific environment and startup programs PATH=$PATH:$HOME/bin BASH_ENV=$HOME/.bashrc USERNAME="root" export USERNAME BASH_ENV PATH sW@D;cI@# Kickstart file automatically generated by anaconda. install lang en_US.UTF-8 langsupport --default en_US.UTF-8 en_US.UTF-8 keyboard us mouse genericwheelps/2 --device psaux skipx network --device eth0 --bootproto dhcp rootpw --iscrypted $1$4x5VIoek$Y5TdXV7flP0TyQYBM7YlQ0 firewall --medium --dhcp authconfig --enableshadow --enablemd5 timezone America/New_York bootloader --location=mbr # The following is the partition information you requested # Note that any partitions you deleted are not expressed # here so unless you clear all partitions first, this is # not guaranteed to work #clearpart --linux #part / --fstype ext2 --noformat --onpart hda2 #part swap --onpart hda3 %packages %post C@C@cI@#ifdef COLOR *customization: -color #endif emacs*Background: DarkSlateGray emacs*Foreground: Wheat emacs*pointerColor: Orchid emacs*cursorColor: Orchid emacs*bitmapIcon: on emacs*font: fixed emacs.geometry: 80x25 Seyon.modems: /dev/modem xterm*background: Black xterm*foreground: Wheat xterm*cursorColor: Orchid xterm*reverseVideo: false xterm*scrollBar: true xterm*reverseWrap: true xterm*font: fixed xterm*fullCursor: true xterm*scrollTtyOutput: off xterm*scrollKey: on xterm*VT100.Translations: #override\n\ Prior : scroll-back(1,page)\n\ Next : scroll-forw(1,page) xterm*titleBar: false xterm_color*background: Black xterm_color*foreground: Wheat xterm_color*cursorColor: Orchid xterm_color*reverseVideo: false xterm_color*scrollBar: true xterm_color*saveLines: 5000 xterm_color*reverseWrap: true xterm_color*font: fixed xterm_color.geometry: 80x25+20+20 xterm_color*fullCursor: true xterm_color*scrollTtyOutput: off xterm_color*scrollKey: on xterm_color*VT100.Translations: #override\n\ Prior : scroll-back(1,page)\n\ Next : scroll-forw(1,page) xterm_color*titleBar: false fN{;0N{;0cI@# ~/.bash_logout clear P@_B9cI@l=/sbin/nologin <86>Jan 12 01:50:19 useradd[553]: new group: name=smmsp, gid=51 <86>Jan 12 01:50:19 useradd[553]: new user: name=smmsp, uid=51, gid=51, home=/var/spool/mqueue, shell=/sbin/nologin <21>Jan 12 01:50:21 sendmail[562]: alias database /etc/aliases rebuilt by root <22>Jan 12 01:50:21 sendmail[562]: /etc/aliases: 63 aliases, longest 10 bytes, 625 bytes total <86>Jan 12 01:50:27 groupadd[573]: new group: name=pcap, gid=77 <86>Jan 12 01:50:27 useradd[574]: new user: name=pcap, uid=77, gid=77, home=/var/arpwatch, shell=/sbin/nologin <13>Jan 12 01:50:49 kudzu: linked /dev/mouse to /dev/psaux <13>Jan 12 01:50:50 kudzu: ran mouseconfig for psaux <13>Jan 12 01:50:50 kudzu: aliased sound-slot-0 as es1371 <13>Jan 12 01:50:50 kudzu: aliased usb-controller as usb-uhci  tohcdebugsetgetHH,HH HH,HH@p HI,D HI 8 HI, HI HI,HI (H&I,H&I H8# /etc/csh.login # System wide environment and startup programs, for login setup if ($?PATH) then setenv PATH "${PATH}:/usr/X11R6/bin" else setenv PATH "/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin" endif limit coredumpsize unlimited setenv HOSTNAME `/bin/hostname` set history=1000 if ( -f $HOME/.inputrc ) then setenv I#E@J/dev/null 2>&1 || : pre-remove sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -S >/dev/null 2>&1 || : alias usb-controller usb-uhci V@C@XI@,W6j jI;aSS SS, SS SS, SS SS,\ SSL SS, SS4 SS, SS SS,| SSl SS,@ SS 4 SS, SS SS, SS SS, SSl SS,@ SS XSS,SS Nmd2A<{ ӭ!!Ж3n`,?pFkkkkkkkk4x;kR>;kR>eI@@#!/bin/sh # nohup -- run a command immume to hangups, with output to a non-tty # Copyright (C) 1991, 1997, 1999, 2000, 2002 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software Foundation, # Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ # Written by David MacKenzie . usage="Usage: $0 COMMAND [ARG]... or: $0 OPTION" usage_try=" Try \`$0 --help' for more information." usage_help="Run COMMAND, ignoring hangup signals. --help display this help and exit --version output version information and exit Report bugs to ." if [ $# -eq 0 ]; then echo >&2 "$usage" echo >&2 "$usage_try" exit 127 fi fail=0 case $# in 1 ) case "z${1}" in z--help ) echo "$usage" || fail=127; echo "$usage_help" || fail=127 exit $fail;; z--version ) echo "nohup (GNU coreutils) 4.5.3" || fail=127 exit $fail;; * ) ;; esac ;; * ) ;; esac trap "" 1 # Redirect stdout if the user didn't already do it. if [ -t 1 ]; then oldmask=`umask`; umask 077 # If we cannot write to the current directory, use the home directory. if exec >> nohup.out; then echo "nohup: appending output to \`nohup.out'" >&2 elif exec >> "$HOME/nohup.out"; then echo "nohup: appending output to \`$HOME/nohup.out'" >&2 else echo "nohup: cannot append to either \`nohup.out' or \`$HOME/nohup.out'" \ >&2 exit 127 fi umask $oldmask fi # Redirect stderr if the user didn't already do it. if [ -t 2 ]; then exec 2>&1 fi exec "$@" Q0kR>0kR>eI@kkkkkF:kR>:kR>eI@(kkkk 8:kR>:kR>eI@ kkkkkkkk`q:kR>:kR>eI@@kkk@);kR>;kR>eI@kkkk;;kR>;kR>eI@ kkkkkkW:kR>:kR>eI@0rksktkukvkwkxkykzk{k|k}k~kX:kR>:kR>eI@hnkokpkqk7tW@;kR>eI@ kklkmk(;kR>;kR>eI@fkgkhkikjkA:kR>:kR>eI@(rent process. Report bugs to ." fail=0 case $# in 1 ) case "z${1}" in z--help ) echo "$usage" || fail=1; exit $fail;; z--version ) echo "groups (GNU coreutils) 4.5.3" || fail=1; exit $fail;; * ) ;; esac ;; * ) ;; esac if [ $# -eq 0 ]; then id -Gn fail=$? else for name in "$@"; do groups=`id -Gn -- $name` status=$? if test $status = 0; then echo $name : $groups else fail=$status fi done fi exit $fail ystem time --adjH0I,H0I (H1I,H1I P0 H2I, H2I0 H3I, H3I H7I, H7I H8I, H8I H9I,H9IH:I,H:I PdH;I,8H;IHH=I,H=I H# # /etc/nsswitch.conf # # An example Name Service Switch config file. This file should be # sorted with the most-used services at the beginning. # # The entry '[NOTFOUND=return]' means that the search for an # entry should stop if the search in the previous entry turned # up nothing. Note that if the search failed due to some other reason # (like no NIS server responding) then the search continues with the # next entry. # # Legal entries are: # # nisplus or nis+ Use NIS+ (NIS version 3) # nis or yp Use NIS (NIS version 2), also called YP # dns Use DNS (Domain Name Service) # files Use the local files # db Use the local database (.db) files # compat Use NIS on compat mode # hesiod Use Hesiod for user lookups # [NOTFOUND=return] Stop searching if not found so far # # To use db, put the "db" in front of "files" for entries you want to be # looked up first in the databases # # Example: #passwd: db files nisplus nis #shadow: db files nisplus nis #group: db files nisplus nis passwd: files shadow: files group: files #hosts: db files nisplus nis dns hosts: files dns # Example - obey only what nisplus tells us... #services: nisplus [NOTFOUND=return] files #networks: nisplus [NOTFOUND=return] files #protocols: nisplus [NOTFOUND=return] files #rpc: nisplus [NOTFOUND=return] files #ethers: nisplus [NOTFOUND=return] files #netmasks: nisplus [NOTFOUND=return] files bootparams: nisplus [NOTFOUND=retsW@C@YI@H;I@H81[;IYI@(console vc/1 vc/2 vc/3 vc/4 vc/5 vc/6 vc/7 vc/8 vc/9 vc/10 vc/11 tty1 tty2 tty3 tty4 tty5 tty6 tty7 tty8 tty9 tty10 tty11 cua0 tty0 ttys/0 ttys/1 ttys/2 >_@^@^@++E@#F;YI@H3IHx3I6Ipi$3I4I`\#d3I5IP.bash_profile.bash_logout.bashrc...A@C@YI@H2I(H ...A0@1>YI@# /etc/profile # System wide environment and startup programs, for login setup # Functions and aliases go in /etc/bashrc pathmunge () { if ! echo $PATH | /bin/egrep -q "(^|:)$1($|:)" ; then if [ "$2" = "after" ] ; then PATH=$PATH:$1 else PATH=$1:$PATH fi fi } # Path manipulation if [ `id -u` = 0 ]; then pathmunge /sbin pathmunge /usr/sbin pathmunge /usr/local/sbin fi pathmunge /usr/X11R6/bin after unset pathmunge # No core files by default ulimit -S -c 0 > /dev/null 2>&1 USER="`id -un`" LOGNAME=$USER MAIL="/var/spool/mail/$USER" HOSTNAME=`/bin/hostname` HISTSIZE=1000 if [ -z "$INPUTRC" -a ! -f "$HOME/.inputrc" ]; then INPUTRC=/etc/inputrc fi export PATH USER LOGNAME MAIL HOSTNAME HISTSIZE INPUTRC for i in /etc/profile.d/*.sh ; do if [ -r "$i" ]; then . $i fi done unset i JpW@MP?P@PAPBPCPDPEPFPGPHPIPJPKPLPMPNPOPPPQPRPSPTPUPVPWPXPYPZP[P\P]P^P_P`PaPbPcPdPePfPgPhPiPjPkPlPmPnPoPpPqPrPsPtPuPvPwPxPyPzP{P|P}P~PPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPQQQQQQQQQ Q Q Q Q QQQQQQQQQQQQQQmT@}A>bI@*libutil-2.3.2.soV@aI@aI@OOOO1V@%q>aI@ libthread_db-1.0.so@aI@aI@OOOOOOV@%q>aI@0librt-2.3.2.soV@aI@aI@OOOOOOOOOOV@%q>aI@Plibresolv-2.3.2.soV@aI@aI@OOOOOOOOOOOOOOOOOOO+V@%q>aI@libpthread-0.10.soV@aI@aI@OOOOOOOOOOOOOOOOOOOOOOOOOOV@%q>aI@libnss_nisplus-2.3.2.soaI@aI@aI@{O|O}O~OOOOOOOOOOE@%q>aI@hlibnss_nis-2.3.2.soaI@aI@aI@pOqOrOsOtOuOvOwOxOyOzOE@%q>aI@Xlibnss_hesiod-2.3.2.soaI@aI@aI@kOlOmOnOoOTOE@%q>aI@(libnss_files-2.3.2.sosW@aI@aI@^O_O`OaObOcOdOeOfOgOhOiOjOsW@%q>aI@hlibnss_dns-2.3.2.so!@aI@aI@YOZO[O\O]OG!@%q>aI@(libnss_compat-2.3.2.soaI@aI@aI@ Pot remove the follHK `HK,4HK HK,HK @ HK, HK  H,h H @( H, H H ,H  8HC,tH$ H$ H$ PH$ HH$ Pt up # the system in a certain run/dev/dev/ubd/0 / reiserfs rw 0 0 none /proc proc rw 0 0 /dev/ubd/0 / reiserfs rw 0 0 none /proc proc rw 0 0 devfs /dev devfs rw 0 0 none /dev/pts devpts rw,gid=5,mode=620 0 0 none /mnt hostfs rw 0 0 N@ZL@ZL@Eroot:$1$qeyVsurN$UGGO5W0/GVAOWYGQ3cDb7/:12429:0:99999:7::: bin:*:12429:0:99999:7::: daemon:*:12429:0:99999:7::: adm:*:12429:0:99999:7::: lp:*:12429:0:99999:7::: sync:*:12429:0:99999:7::: shutdown:*:12429:0:99999:7::: halt:*:12429:0:99999:7::: mail:*:12429:0:99999:7::: news:*:12429:0:99999:7::: uucp:*:12429:0:99999:7::: operator:*:12429:0:99999:7::: games:*:12429:0:99999:7::: gopher:*:12429:0:99999:7::: ftp:*:12429:0:99999:7::: nobod/dev/ubd/0 / reiserfs rw 0 0 none /proc /dev/dev/ubd/0 / reiserfs rw 0 0 none /proc proc rw 0 0 devfs /dev devfs rw 0 0 none /dev/pts devpts rw,gid=5,mode=620 0 0 none /mnt hostfs rw 0 0 ZW@ZW@ZW@Jroot:x:0:root bin:x:1:root,bin,daemon daemon:x:2:root,bin,daemon sys:x:3:root,bin,adm adm:x:4:root,adm,daemon tty:x:5: disk:x:6:root lp:x:7:daemon,lp mem:x:8: kmem:x:9: wheel:x:10:root mail:x:12:mail news:x:13:news uucp:x:14:uucp man:x:15: games:x:20: gopher:x:30: dip:x:40: ftp:x:50: lock:x:54: nobody:x:99: users:x:100: rpm:x:37: floppy:x:19: vcsa:x:69: utmp:x:22: nscd:x:28: slocate:x:21: sshd:x:74: rpc:x:32: rpcuser:x:29: nfsnobody:x:65534: mailnull:x:47: smmsp:x:51: pcap:x:77: xfs:x:43: ntp:x:38: gdm:x:42: canna:x:39: lie:x:500: named:x:25: user:x:501: 1sW@d@d@root:aGCTmR/1FMHZg:12432:0:99999:7::: bin:*:12429:0:99999:7::: daemon:*:12429:0:99999:7::: adm:*:12429:0:99999:7::: lp:*:12429:0:99999:7::: sync:*:12429:0:99999:7::: shutdown:*:12429:0:99999:7::: halt:*:12429:0:99999:7::: mail:*:12429:0:99999:7::: news:*:12429:0:99999:7::: uucp:*:12429:0:99999:7::: operator:*:12429:0:99999:7::: games:*:12429:0:99999:7::: gopher:*:12429:0:99999:7::: ftp:*:12429:0:99999:7::: nobody:*:12429:0:99999:7::: rpm:!!:12429:0:99999:7::: vcsa:!!:12429:0:99999:7::: nscd:!!:12429:0:99999:7::: sshd:!!:12429:0:99999:7::: rpc:!!:12429:0:99999:7::: rpcuser:!!:12429:0:99999:7::: nfsnobody:!!:12429:0:99999:7::: mailnull:!!:12429:0:99999:7::: smmsp:!!:12429:0:99999:7::: pcap:!!:12429:0:99999:7::: user:VGDJElapVGXyU:12432:0:99999:7::: pW@d@d@  @@3N<@V@V@LABEL=/1 / ext2 defaults 1 1 none /dev/pts devpts gid=5,mode=620 0 0 none /proc proc defaults 0 0 none /dev/shm tmpfs defaults 0 0 /dev/hda3 swap swap defaults 0 0 |E@;C@[I@root:::root bin:::root,bin,daemon daemon:::root,bin,daemon sys:::root,bin,adm adm:::root,adm,daemon tty::: disk:::root lp:::daemon,lp mem::: kmem::: wheel:::root mail:::mail news:::news uucp:::uucp man::: games::: gopher::: dip::: ftp::: lock::: nobody::: users::: rpm:x:: floppy:x:: vcsa:x:: utmp:x:: nscd:x:: slocate:x:: sshd:x:: rpc:x:: rpcuser:x:: nfsnobody:x:: mailnull:x:: smmsp:x:: pcap:x:: user:!:: guest:!:: c@^@^@nameserver 192.168.0.254 !@^@^@.0.148 redhat9 redhat9.goober.org 192.168.0.151 turbolinux7 turbolinux7.goober.org 192.168.0.250 uml-test uml-test.goober.org 192.168.0.254 router xdisplay  ,H,H H,H H,lH dH,8H  H,\ H HHH,HH,HH,HDHH,HHpAA^\@a@a@# # inittab This file describes how the INIT process should set up # the system in a certain run-level. # # Author: Miquel van Smoorenburg, # Modified for RHS Linux by Marc Ewing and Donnie Barnes # # Default runlevel. The runlevels used by RHS are: # 0 - halt (Do NOT set initdefault to this) # 1 - Single user mode # 2 - Multiuser, without NFS (The same as 3, if AV@a@a@# # inittab This file describes how the INIT process should set up # the system in a certain run-level. # # Author: Miquel van Smoorenburg, # Modified for RHS Linux by Marc Ewing and Donnie Barnes # # Default runlevel. The runlevels used by RHS are: # 0 - halt (Do NOT set initdefault to this) # 1 - Single user mode # 2 - Multiuser, without NFS (The same as 3, if you do not have networking) # 3 - Full multiuser mode # 4 - unused # 5 - X11 # 6 - reboot (Do NOT set initdefault to this) # id:3:initdefault: # System initialization. si::sysinit:/etc/rc.d/rc.sysinit l0:0:wait:/etc/rc.d/rc 0 l1:1:wait:/etc/rc.d/rc 1 l2:2:wait:/etc/rc.d/rc 2 l3:3:wait:/etc/rc.d/rc 3 l4:4:wait:/etc/rc.d/rc 4 l5:5:wait:/etc/rc.d/rc 5 l6:6:wait:/etc/rc.d/rc 6 # Trap CTRL-ALT-DELETE ca::ctrlaltdel:/sbin/shutdown -t3 -r now # When our UPS tells us power has failed, assume we have a few minutes # of power left. Schedule a shutdown for 2 minutes from now. # This does, of course, assume you have powerd installed and your # UPS connected and working correctly. pf::powerfail:/sbin/shutdown -f -h +2 "Power Failure; System Shutting Down" # If power was restored before the shutdown kicked in, cancel it. pr:12345:powerokwait:/sbin/shutdown -c "Power Restored; Shutdown Cancelled" # Run gettys in standard runlevels 0:2345:respawn:/sbin/mingetty ttys/0 1:2345:respawn:/sbin/mingetty ttys/1 2:2345:respawn:/sbin/mingetty ttys/2 #c:2345:respawn:/sbin/mingetty serial/0 # Run xdm in runlevel 5 x:5:respawn:/etc/X11/prefdm -nodaemon G@d@d@root:x:0:0:root:/root:/bin/bash bin:x:1:1:bin:/bin:/sbin/nologin daemon:x:2:2:daemon:/sbin:/sbin/nologin adm:x:3:4:adm:/var/adm:/sbin/nologin lp:x:4:7:lp:/var/spool/lpd:/sbin/nologin sync:x:5:0:sync:/sbin:/bin/sync shutdown:x:6:0:shutdown:/sbin:/sbin/shutdown halt:x:7:0:halt:/sbin:/sbin/halt mail:x:8:12:mail:/var/spool/mail:/sbin/nologin news:x:9:13:news:/etc/news: uucp:x:10:14:uucp:/var/spool/uucp:/sbin/nologin operator:x:11:0:operator:/root:/sbin/nologin games:x:12:100:games:/usr/games:/sbin/nologin gopher:x:13:30:gopher:/var/gopher:/sbin/nologin ftp:x:14:50:FTP User:/var/ftp:/sbin/nologin nobody:x:99:99:Nobody:/:/sbin/nologin rpm:x:37:37::/var/lib/rpm:/bin/bash vcsa:x:69:69:virtual console memory owner:/dev:/sbin/nologin nscd:x:28:28:NSCD Daemon:/:/sbin/nologin sshd:x:74:74:Privilege-separated SSH:/var/empty/sshd:/sbin/nologin rpc:x:32:32:Portmapper RPC user:/:/sbin/nologin rpcuser:x:29:29:RPC Service User:/var/lib/nfs:/sbin/nologin nfsnobody:x:65534:65534:Anonymous NFS User:/var/lib/nfs:/sbin/nologin mailnull:x:47:47::/var/spool/mqueue:/sbin/nologin smmsp:x:51:51::/var/spool/mqueue:/sbin/nologin pcap:x:77:77::/var/arpwatch:/sbin/nologin user:x:500:501::/home/user:/bin/bash sW@d@d@995d@d@d@995d@d@d@995d@d@d@wKK,wKK wKK,wKK,pwKK dwKK,8wKK ,wKK,wKK KK,KK 0 KK, KQ, KhJ, KhJHd KyJ,8 KyJ KzJ,d KzJK,KKK,KK<KO,KOKO,KOKO,KOhHKO,KOU*OOPlibthread_db-1.0.solibm-2.3.2.solibm.so.6...AHV@C@aI@KKKKKKKKKKKKKKKKKKKKKKKKKK^@%q>aI@ld-2.3.2.so ^@aI@aI@KOKOOKOKOOx1OOhU*OOPlibthread_db-1.0.solibm-2.3.2.solibm.so.6...AH@C@aI@KKKKKKKKKKKKKKKKKKKKKKKKKKuW@%q>aI@ld-2.3.2.so uW@aI@aI@KOKOO1OOt_OO@IoOOsOO}OOlibpthread-0.10.solibc.so.6libpthread.so.0libc-2.3.2.solibm-2.3.2.solibm.so.6...A@C@aI@KKxKpLKKhV\Kd`^cK>P2.4.22-3um2.4.222.4.20-8...AV@L@L@KKi$?p\#d`.bash_profile.bash_history.bash_logout.bashrc...AW@@@KzJ=zJ{Ji$zJ|J7/zJRp\#dzJ}J`.bash_profile.Xclients.bash_logout.bashrc...A)@^@^@KyJ=yJTi$yJU7/yJZp\#dyJV`.bash_profile.Xclients.bash_logout.bashrc...A)@^@^@KhJ@=8qhJiJ0html...AH)@^@^@^@^@^@*H>*H>[I@# Sample stunnel configuration file # Copyright by Michal Trojnara 2002 # Comment it out on Win32 cert = /usr/etc/stunnel/mail.pem chroot = /usr/var/run/stunnel/ # PID is created inside chroot jail pid = /stunnel.pid setuid = nobody setgid = nogroup # Workaround for Eudora bug #options = DONT_INSERT_EMPTY_FRAGMENTS # Authentication stuff #verify = 2 # don't forget about c_rehash CApath # it is located inside chroot jail: #CApath = /certs # or simply use CAfile instead: #CAfile = /usr/etc/stunnel/certs.pem # Some debugging stuff #debug = 7 #output = stunnel.log # Use it for client mode #client = yes # Service-level configuration [pop3s] accept = 995 connect = 110 [imaps] accept = 993 connect = 143 [ssmtp] accept = 465 connect = 25 [s1] accept = 5000 connect = mail.osw.pl:110 # delay = yes [s2] accept = 5001 connect = mail.osw.pl:25 #[https] #accept = 443 #connect = 80 #TIMEOUTclose = 0 *H>*H>[I@..03C@C@[I@..03C@C@[I@...03@C@[I@C@Z>[I@..03@C@[I@T69@9Y/JHJA HJ,HJ HJ,HJ |H&J,PH&JHH(J, H(J H)J, H)J H*J,d H*JT H+J,( H+J H,J, H,J H-J, H-J H.J,t H.Jd H/J,8 H/J( H0J, H0J, H6J, H6JP H8J, H8J H9J,H9J , , ,,,,,,,,,,,,,,,,,,, ,!,",#,$,%,&,',(,),*,+,,,-,.,/,0,1,2,3,4,5,6,7,8,9,:,;,<,=,>,?,@,A,B,C,D,E,F,G,H,I,J,K,L,M,N,O,P,Q,R,S,T,U,V,W,X,Y,Z,[,\,],^,_,`,a,b,c,d,e,f,g,h,i,j,k,l,m,n,o,p,q,r,s,t,u,v,w,x,y,z,{,|,},~,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,D uW@h92>YI@# *REQUIRED* # Directory where mailboxes reside, _or_ name of file, relative to the # home directory. If you _do_ define both, MAIL_DIR takes precedence. # QMAIL_DIR is for Qmail # #QMAIL_DIR Maildir MAIL_DIR /var/spool/mail #MAIL_FILE .mail # Password aging controls: # # PASS_MAX_DAYS Maximum number of days a password may be used. # PASS_MIN_DAYS Minimum number of days allowed between password changes. # PASS_MIN_LEN Minimum acceptable password length. # PASS_WARN_AGE Number of days warning given before a password expires. # PASS_MAX_DAYS 99999 PASS_MIN_DAYS 0 PASS_MIN_LEN 5 PASS_WARN_AGE 7 # # Min/max values for automatic uid selection in useradd # UID_MIN 500 UID_MAX 60000 # # Min/max values for automatic gid selection in groupadd # GID_MIN 500 GID_MAX 60000 # # If defined, this command is run when removing a user. # It should remove any at/cron/print jobs etc. owned by # the user to be removed (passed as the first argument). # #USERDEL_CMD /usr/sbin/userdel_local # # If useradd should create home directories for users by default # On RH systems, we do. This option is ORed with the -m flag on # useradd command line. # CREATE_HOME yes d@J>YI@H6JHH@(6J7J0macros.specspo...AP@C@YI@H0JH{p0J2J, r0J3J,s0J4JAt0J5Jz0J1Jprt_dsfieldrt_tablesrt_scopesrt_realmsrt_protos...A@C@YI@rc.d/rc6.d 6W@YI@YI@rc.d/rc5.d 6W@YI@YI@rc.d/rc4.d 6W@YI@YI@rc.d/rc3.d 6W@YI@YI@rc.d/rc2.d 6W@YI@YI@rc.d/rc1.d 6W@YI@YI@rc.d/rc0.d 6W@YI@YI@rc.d/init.d 6W@YI@YI@H&J@H8Z&J'J0useradd...AH@C@YI@HJH>'JJJ%JP+J#Jev,J Je-J"JtRJ!J|J$Jmta-newaliasesmanmta-newaliasesmta-rmailmta-mailqmta-mailqmanmta-aliasesmanmta...A@C@YI@,,,%uW@E@YI@freebsd-ypxfrd %'_|/?LKOOPKO,$KOXKO,KOKO,dKO\KO,0KOKO, KO KO, KO KO,p KO` KO,4 KOHKO,KO KO,KOKO,KOKO,XKOHKO,KO KO,KOKO,KOKO,KO\LKO, KOKO,KO8KK,AKOLOMONOOOPOQOROSOTOUOVOWOXO,E@%q>aI@plibnsl-2.3.2.sooW@aI@aI@4O5O6O7O8O9O:O;OO?O@OAOBOCODOEOFOGOHOIOJOeoW@%q>aI@libm-2.3.2.so V@aI@aI@OOOOOOOOO O O O O OOOOOOOOOOOOOOOOOOO O!O"O#O$O%O&O'O(O)O*O+O,O-O.O/O0O1O2O3O;V@%q>aI@libdl-2.3.2.sopW@aI@aI@NNNN:pW@%q>aI@ libcrypt-2.3.2.sooW@aI@aI@NNNNNNt\oW@%q>aI@0libc-2.3.2.so uW@aI@aI@{M|M}M~MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMNNNNNNNNN N N N N NNNNNNNNNNNNNNNNNNN N!N"N#N$N%N&N'N(N)N*N+N,N-N.N/N0N1N2N3N4N5N6N7N8N9N:N;NN?N@NANBNCNDNENFNGNHNINJNKNLNMNNNONPNQNRNSNTNUNVNWNXNYNZN[N\N]N^N_N`NaNbNcNdNeNfNgNhNiNjNkNlNmNnNoNpNqNrNsNtNuNvNwNxNyNzN{N|N}N~NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNuW@%q>aI@ libanl-2.3.2.soaI@aI@aI@wMxMyMzM<8E@%q>aI@ rMsMtMuMvMDE@%q>aI@(libBrokenLocale-2.3.2.soaI@aI@aI@pMqME@%q>aI@libe2p.so.2.3 aI@aI@aI@KOPKH!OO0libe2fsim.1.2.1.so...AX@ C@aI@OOOt_OO@IoOOxsOOh05~OOPlibpthread-0.29.solibc.so.6libpthread.so.0libc-2.3.2.solibthread_db.so.1 UT]hUZ],<UZ] Uh],x Uh] Uv], Uv] U}],U}]defghijklmnopqrstuvwxyz{|}~¡áġšơǡȡɡʡˡ̡͡ΡϡСѡҡӡԡա֡סء١ڡۡܡݡޡߡ  !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~¢âĢŢƢǢȢɢʢˢ̢͢΢ϢТѢҢӢԢբ֢עآ٢ڢۢܢݢޢߢ  !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abc]uW@B@I@0Uv]UU <]E]O v]|]xv]z]hJJ/v]x]Xɨ>UUH>UU8rIv]y]( bv]w].hUU#r<]C]sUUxv]{]LC_MONETARYLC_PAPERLC_CTYPELC_COLLATELC_IDENTIFICATIONLC_MESSAGESLC_NUMERICLC_MEASUREMENTLC_ADDRESSLC_TELEPHONELC_TIMELC_NAME...A)@B@yI@Uh]UU h]r]O h]u]xh]p]hJJ/h]j]Xɨ>h]o]H>h]s]8rIh]m]( bh]i].hh]k]#rh]l]sh]t]xh]q]LC_MONETARYLC_PAPERLC_CTYPELC_COLLATELC_IDENTIFICATIONLC_MESSAGESLC_NUMERICLC_MEASUREMENTLC_ADDRESSLC_TELEPHONELC_TIMELC_NAME...A)@B@yI@UZ]UU Z]d]O Z]g]xZ]b]hJJ/Z]\]Xɨ>Z]a]H>Z]e]8rIZ]_]( bZ][].hZ]]]#rZ]^]sZ]f]xZ]c]LC_MONETARYLC_PAPERLC_CTYPELC_COLLATELC_IDENTIFICATIONLC_MESSAGESLC_NUMERICLC_MEASUREMENTLC_ADDRESSLC_TELEPHONELC_TIMELC_NAME...A)@B@yI@UT]UU T]V]O T]Y]xT]X]hJJ/UUXɨ>UUH>UU8rIT]U]( bT]W].hUU#rUUsUUxWWLC_MONETARYLC_PAPERLC_CTYPELC_COLLATELC_IDENTIFICATIONLC_MESSAGESLC_NUMERICLC_MEASUREMENTLC_ADDRESSLC_TELEPHONELC_TIMELC_NAME...>ogjneSSq  SS, SS, SS,t SSl SS,@ SS8 SS, SS  SS, SS` SS,4 SS, SS, SS SS, SS SS,\ SS$8 SS, SSSS,\SSTSS,(SS SS,SS SS,SSjX312>12>eI@ #!/bin/sh - # # To use this filter with less, define LESSOPEN: # export LESSOPEN="|/usr/bin/lesspipe.sh %s" lesspipe() { case "$1" in *.[1-9n]|*.man|*.[1-9n].bz2|*.man.bz2|*.[1-9].gz|*.[1-9]x.gz|*.[1-9].man.gz) case "$1" in *.gz) DECOMPRESSOR="gunzip -c" ;; *.bz2) DECOMPRESSOR="bunzip2 -c" ;; *) DECOMPRESSOR="cat" ;; esac if $DECOMPRESSOR -- "$1" | file - | grep -q troff; then if echo "$1" | grep -q ^/; then #absolute path man -- "$1" | cat -s else man -- "./$1" | cat -s fi else $DECOMPRESSOR -- "$1" fi ;; *.tar) tar tvvf "$1" ;; *.tgz|*.tar.gz|*.tar.[zZ]) tar tzvvf "$1" ;; *.tar.bz2|*.tbz2) bzip2 -dc "$1" | tar tvvf - ;; *.[zZ]|*.gz) gzip -dc -- "$1" ;; *.bz2) bzip2 -dc -- "$1" ;; *.zip) zipinfo -- "$1" ;; *.rpm) rpm -qpivl --changelog -- "$1" ;; *.cpi|*.cpio) cpio -itv < "$1" ;; *.gif|*.jpeg|*.jpg|*.pcd|*.png|*.tga|*.tiff|*.tif) if [ -x "`which identify`" ]; then identify "$1" else echo "No identify available" echo "Install ImageMagick to browse images" fi ;; *) case "$1" in *.gz) DECOMPRESSOR="gunzip -c" ;; *.bz2) DECOMPRESSOR="bunzip2 -c" ;; esac $DECOMPRESSOR -- "$1" ;; esac } if [ -d "$1" ] ; then /bin/ls -alF -- "$1" else lesspipe "$1" 2> /dev/null fi LW@?>eI@jjj(?>?>eI@jj?>?>eI@jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjKW@?>eI@jjjjjjjjj<ƚB>ƚB>eI@Hjjj"tW@ƚB>eI@jjjjjjjlƚB>ƚB>eI@8jjjjjjjjjjj ƚB>ƚB>eI@Xgjhjijjjkjljmjnjojpjqjrjsjtjujvjwjxjyjzj{j|j}j~jjjjjjjjjjjjj2ƚB>ƚB>eI@ #!/bin/sh # Xterm codes can be found here: # http://babayaga.math.fu-berlin.de/~rxvt/refer/refer.html if [ a"$TERM" = axterm -o a"$TERM" = axterm-color -o \ a"$TERM" = akterm -o a"$TERM" = arxvt ]; then # Disable X11 XTerm mouse reporting echo '[?1000l' # Reset foreground and background colors echo '' fi # Reset the terminal /usr/bin/reset # Reset terminal size if [ -f /usr/X11R6/bin/resize ]; then eval `resize` fi B>B>eI@tsetz[@eI@eI@ticz[@eI@eI@[j\j]j^j_j`jajbjcjdjejƚB>ƚB>eI@Xkq||w (alized registers; U;d@Ud,|U>dlU?d,@U?d(U@d, U@d UAd, UAd  UBd, UBd| UCd,P UCd D UDd, UDd Udd,UddUed,Ued,Ufd,X)?>)?>I@Xijklmnopqrstuvwxyz{|}~  !"#$%&'()*+,-./0123 )?>)?>I@Xlibsasl.so.7.1.11@I@I@UDdSUDdIdDd[dDd\dDd]dDd_d"Ddad#DdbddDdcdLDd`dDdEdDdGdDdZdpODdXdhQ5+DdYdX(,DdOdH?^.DdJd8t3Dd^d(zJ5DdKd>;DdSdzJIDdTdJDdLd/RDdWdqcDdMd2lDdUd\tDdQdi686-linuxnoarch-linuxi486-linuxrpm.dailyconvertrpmrc.shmacrosmkinstalldirsconfig.subrpmpopt-4.2config.guessi586-linuxrpm.xinetdrpm.logrpm2cpio.shi386-linuxathlon-linuxrpmrctgpgrpmvrpmurpmqrpmkrpmirpmerpmd...A%%)@/C@I@WXYX/E@ƚB>I@libpanel.so.5.3I@I@I@z5CZ h+2BTg{H+5a6  3%`V@lt}x.pؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑؑ)?>)?>I@libncurses.so.5.3tW@I@I@PQRSTU\E@ƚB>I@0libmenu.so.5.3I@I@I@DEFGHIJKLMNO$E@ƚB>I@`libform.so.5.3I@I@I@ !"#$%&'()*+,-./0123456789:;<=>?@ABC U^7]q `U8d,4U8d<U9d,U9dU:d,U:d0XU;d,,U;d< DtW@ƚB>I@U:d(SU ...A0)@H>I@libnewt.so.0.51.4M@I@I@XM@@>I@x7]^b 7]^b >]^`p ]^`` ]^`P ]]^a`H e]^b`@ ]^zc0 ]^{c ]^c ]^c E^^;c E^^[a^ch a^%cX a^~`H -a^b@  c^b0  c^b  c^Oc Ac^Qc Jc^Rc 0c^U` 0c^V` #\c^Cc c^b c^d c^d  c^c c^c zd^c {d^cx |d^f`h /e^bX c$e^bH e^`8 e^`( 5f^b 9f^c |f^Fc ^f^d ff^d ^g^Gc ^g^Hc wg^` wg^` \i^` ei^Tax $i^-dh ,i^.dX i^cH i^c8 mj^b( uj^b ij^c ij^c  j^+c @k^c Hk^c =(k^c dk^_ lk^_ 2k^/dx Jl^bh Jl^bX o^cH ʬo^c8 =Np^ d( Wp^b Wp^b p^[cp^\cAq^p`Jq^q`Yq^^caq^_c}"s^c"s^cnu^dxnu^dhu^bX}Kv^`Hvv^m`@vv^n`8v^a(#v^c 0w^c8w^cx^dx^dp8y^]`=y^1cbL{^jckL{^kch|^c|^c|^cW|^`pW|^`` |^:cPdj}^bHlj}^ c@z~^b8{~^b0~^Zc 4^v`<^w`cmd.pyocmd.pycpopen2.pyhmac.pyohmac.pycknee.pyoknee.pycmultifile.pyTERMIOS.pyoTERMIOS.pycsymtable.pyosymtable.pyckeyword.pypre.pyopre.pycmimetools.pybase64.pyurlparse.pyourlparse.pycshlex.pyoshlex.pycsmtpd.pydumbdbm.pycgi.pyocgi.pycSocketServer.pyhtmllib.pyurllib2.pyourllib2.pycrlcompleter.pyorlcompleter.pycpoplib.pyopoplib.pyccgitb.pyocgitb.pycpopen2.pyopopen2.pycihooks.pyoihooks.pycweakref.pysocket.pystatvfs.pyfilecmp.pyofilecmp.pycxmllib.pyCGIHTTPServer.pyoCGIHTTPServer.pycinspect.pysmtplib.pyosmtplib.pycmarkupbase.pyimghdr.pyoimghdr.pycgetopt.pyogetopt.pycshutil.pyoshutil.pycxdrlib.pyoxdrlib.pycdircache.pyodircache.pycSimpleXMLRPCServer.pyoSimpleXMLRPCServer.pycntpath.pyontpath.pycuser.pyouser.pycntpath.pystringold.pyformatter.pydifflib.pyodifflib.pycgetpass.pyhttplib.pybisect.pystringold.pyostringold.pycsgmllib.pyosgmllib.pycwave.pytzparse.pyhotshotnntplib.pyasyncore.pyoasyncore.pycpdb.pyopdb.pycpdb.docformatter.pyoformatter.pycgzip.pycodeop.pymailbox.pymacpath.pymailcap.pyBaseHTTPServer.pycodecs.pyunittest.pyplat-linux2telnetlib.pymultifile.pyomultifile.pycsre_parse.pyosre_parse.pycpyclbr.pyopyclbr.pycbdb.pyobdb.pycStringIO.pyoStringIO.pyccompileall.pygettext.pyogettext.pycB_INARGS); #defin8L p 8M,d 8M 8N, 8N p OP,OP OQ,OQEADS # define POP_SAVEARRAY() NOOP #else # define POP_SAVEARRAY() \ STMT_START { \ SvREFCNT_dec(GvAV(PL_defgv)); \ GvAV(PL_defgv) = cx->blk_sub.savearray; \ } STMT_ENtW@B>I@}linux-basic|linux console@!%)4EGKMQUY]chmrw| "'+/2;DMV\_jmor!&(.4:@FLRX^dity [%i%p1%d;%p2%dr[%i%p1%dG[%i%p1%d;%p2%dH [%p1%dX[?5h[?5l$<200/>[@[3~[[A[21~[[B[[C[[D[[E[17~[18~[19~[20~[1~[2~[6~[5~ [%p1%dP[%p1%dM[%p1%d@[%p1%dLc]R8[%i%p1%dd7 M[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;mH +,-.0`afghijklmno~pqrs_tuvwxyz{|}~[4~[23~[24~[25~[26~[28~[29~[31~[32~[33~[34~[%i%d;%dR[?6c[3%p1%dm[4%p1%dmB>B>I@>kaypro|kaypro2|kaypro IIP (*,.0368:< $<1/>=%p1%' '%+%c%p2%' '%+%c  RE pB>B>I@='synertek|ktm|synertek380|synertek ktm 3/80 tubeless terminalP!#%KJ=%p1%' '%+%c%p2%' '%+%c B>B>I@iEkvt|KDE terminalP@"&*;=ACGKOSUZchmrwy} '09BKT]f %)-1; [%i%p1%d;%p2%dr[%i%p1%d;%p2%dH 7[?47h[?47l87[?7h[?1;3;4;6l8>OBOP[21~OQOROS[15~[17~[18~[19~[20~[2~OD[6~[5~OCOA[?1l>[?1h=[%p1%dP[%p1%dM[%p1%dB[%p1%dL[%p1%dD[%p1%dC[%p1%dA7[?7h[?1;3;4;6l8>87 M ``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~)0[23~[24~[25~[26~[28~[29~[31~[32~[33~[34~[%i%d;%dR[?1;2c[3%p1%dm[4%p1%dm1m8i\SSq hSS,lSS\SS,0SS SS, SS$ SS, SS SS,T SS8 SS, SS SS, SS SS, SS$l SS,@ SS 4 SS, SS SS, SS SS,| SSd ST,8 ST , ST, ST ST, ST ST, ST t ST,H STD ST, ST ST, ST ST,T ST H ST, ST  S T,S TS T,S TS T,tS T tdou#!/bin/sh # gzexe: compressor for Unix executables. # Use this only for binaries that you do not use frequently. # # The compressed version is a shell script which decompresses itself after # skipping $skip lines of shell commands. We try invoking the compressed # executable with the original name (for programs looking at their name). # We also try to retain the original file permissions on the compressed file. # For safety reasons, gzexe will not create setuid or setgid shell scripts. # WARNING: the first line of this file must be either : or #!/bin/sh # The : is required for some old versions of csh. # On Ultrix, /bin/sh is too buggy, change the first line to: #!/bin/sh5 x=`basename "$0"` if test $# = 0; then echo compress executables. original file foo is renamed to foo~ 1&>2 echo usage: ${x} [-d] files... 1>&2 echo " -d decompress the executables" 1>&2 exit 1 fi tmp=`/bin/mktemp ${TMPDIR:-/tmp}/gzexe.XXXXXXXXXX` || exit 1 traR:>:>eI@../../bin/gunzip[@eI@eI@GlHlP1>1>eI@DlElFl);kR>;kR>eI@AlBlCl * @;kR>eI@l?l@lH;kR>;kR>eI@(6l7l8l9l:l;lWtW@;kR>eI@0%l&l'l(l)l*l+l,l-l.l/l0l1l2l3l4l5lT:kR>:kR>eI@"l#l$l|.;kR>;kR>eI@llll l!l|R@;kR>eI@0llll<;kR>;kR>eI@ lll\);kR>;kR>eI@llllll|V;kR>;kR>eI@0l l l l l lliV@;kR>eI@8llllll|V@;kR>eI@0kll.\@;kR>eI@kkkkkkkkk@@;kR>eI@Hkkkk>;kR>;kR>eI@ kkkkktJ;kR>;kR>eI@(kkkkkkkg:kR>:kR>eI@8kkkkk|F;kR>;kR>eI@(kkkkkkkkk4:kR>:kR>eI@Hkkkkkkkk`q;kR>;kR>eI@@kkkk\9;kR>;kR>eI@  ȘИؘܘ8  ( <$P{ з{ ,,,Xt  ,H  4 !, ! ", "0 #,l #X $,, $( %, % &, &p ',D ' 8 (, ( ), ) *, * +,d +L ,, ,D -, - .,p .\ /,0 /40,01,1 2,\2@3,3 4,45,50p6,D6$ 7,7`8,h8 \9,09:,: e;; -[vF]) opts="$opts $1 '$2'"""\&V@;kR>TI@"""""""fV@;kR>TI@8"""\(;kR>;kR>TI@""""""""""""""""""""""""Lu@4kR>TI@"""""""""uW@;kR>TI@H""""""""""""@;kR>TI@`""""0V@;kR>TI@ """.;kR>;kR>TI@"""""""gkW@;kR>TI@8"""|)QN@;kR>TI@""""|6V@;kR>TI@ """""""""""""TV@;kR>TI@h"""""FQC@;kR>TI@("""""GYN@;kR>TI@(w"x"y"z"{"|"}"~""""""""""TFW@;kR>TI@q"r"s"t"u"v"VQN@;kR>TI@0n"o"p"*;kR>;kR>TI@k"l"m"\&;kR>;kR>TI@h"i"j"\,C@;kR>TI@e"f"g"|/;kR>;kR>TI@^"_"`"a"b"c"d"o@;kR>TI@8V"W"X"Y"Z"["\"]"4xV@;kR>TI@@L"M"N"O"P"Q"R"S"T"U"ܖV@;kR>TI@PG"H"I"J"K"MsW@;kR>TI@(;"<"=">"?"@"A"B"C"D"E"F"t)@;kR>TI@`6"7"8"9":"TI@(1"2"3"4"5"FV@;kR>TI@(!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!""""""""" " " " " """"""""""""""""""" "!"""#"$"%"&"'"(")"*"+","-"."/"0"&}B>&}B>TI@!!!!8V@;kR>TI@ !!!!!FV@;kR>TI@(xnwwxhnwx,lnwxhnwx,nwxhpnwx,Dnwx nwx, nwx nwx, nwxh nw y,X nw y nw#y, nw#yhD nwI@nw#y`nnwXO #y:yPrI#y$y@LC_MESSAGESLC_TIME...Ah)@!C@I@nw yxnnwp& y"yhO y y`rI y yPLC_MESSAGESLC_TIMEman...A)@sC@I@nwx`nnwXO xyPrIxx@LC_MESSAGESLC_TIME...Ah)@!C@I@nwxxnnwp&xxhO xx`rIxxPLC_MESSAGESLC_TIMEman...A)@sC@I@nwxxnnwp&xxhO xx`rIxxPLC_MESSAGESLC_TIMEman...A)@sC@I@nwx`nnwXO xxPrIxx@LC_MESSAGESLC_TIME...Ah)@!C@I@nwx`nnwX&xxPrIxx@LC_MESSAGESman...Ah)@sC@I@nwwx`nnwXO wxxPrIwxxx@LC_MESSAGESLC_TIME...iG Vk4tRR HRR,RR(dRR,8R, R R RRRR,RR RR,` RR RR,x RR$T RR,( RR RR, RR8 RR, RR | RR,P RR D RR, RR RR,RRRR,RR pRR,DRR(RR,RRRR,RRRR,hRR08RR0____________a2>a2>cI@`?_@_A_B_C_D_E_F_G_H_I_J_K_L_M_N_O_P_Q_R_S_T_U_V_W_X_Y_Z_[_\_]_^___`_a_b_c_d_e_f_g_h_i_j_k_l_m_n_o_p_q_r_s_t_u_v_w_x_y_z_{_|_}_~________________________________ls cls cd /etc cd rc.d/ vi rc.sysinit xemacs -nw rc.sysinit emacs -nw rc.sysinit cd .. ls vi group cd /etc vi group ifconfig scp lie@10.0.0.1:/etc/group . ls vi rc.d/rc.sysinit ls vi rc.d/rc.sysinit ls cd ls ls scp -r lie@10.0.0.1:/mnt/hgfs/home/Teaching/Security_Course/stack_smash/server/official vuln gid ls groups ls cd vuln/ ls ./vuln_server 1500 ./vuln_server 1500 ls ./vuln_server 1500 cd /etc less passwd cat shadow ls cd vuln/ ls touch passwd touch shadow ./vuln_server 1500 ./vuln_server 1500 ./vuln_server 1500 ls cat passwd cat shadow ls cd /etc ls /root/vuln/vuln_server 1500 cat passwd tail /var/log/mes tail /var/log/messages less /var/log/messages less /var/log/secure ls less shadow ls vi shadow vi passwd ls /root/vuln/vuln_server 1500 vi passwd vi shadow ls shutdown -h now ls cd vuln/ ./vuln_server 1500 cd etc cd /etc/ vi inittab cd ls shutdown -h now ls /etc/rc.d/init.d/iptables status lsmod lsmod /etc/rc.d/init.d/iptables start cd /lib/modules/ ls cd 2.4.22-3um/ ls cd kernel/ ls cd arch/ ls cd um/ ls cd fs ls ls cd hppfs ls cd .. cd hostfs ls cd .. ls cd mount none -t hostfs /mnt cd /mnt ls cd home/lie/ ls cd uml/kernel/ ls cd .. cd linux/linux-2.4.22/ ls make modules_install ARCH=um cd /lib/modules/ ls cd 2.4.22-3um/ ls cd kernel/ ls ls ls cd /lib/modules/2.4.22-3um/kernel/ ls cd ls /etc/rc.d/init.d/iptables start ls cd /mnt/home/lie/uml/linux/linux-2.4.22/ ls make modules_install ls cd /lib/modules/2.4.22 ls cd kernel/ ls cd cd /mnt/ ls cd home/lie/ ls cd uml/linux/linux-2.4.22/ ls make modules_install ARCH=um ls /lib/modules/2.4.22-3um/kernel/ rm -rf /lib/modules/2.4.22-3um/kernel/ make modules_install ARCH=um ls /lib/modules/2.4.22-3um/kernel/ ls /lib/modules/2.4.22-3um/ lsmod shutdown -h now su -l user mount none /mnt -t hostfs shutdown -h now mount none -t hostfs /mnt shutdown -h now ls gdb cd /home ls cd ls ls mount none -t hostfs /mnt cd /mnt/davidlie/a/a0/lie/ ls cd Teaching/pp1/ ls cd sploits ls make ./sploit1 ./sploit2 ./sploit3 cd /mnt/davidlie/a/a0/lie/ ls cd Teaching/pp1/ ls cd sploits ls ./sploit1 vi sploit1.c ls ls cd ../targets/ ls make target1 target2 target3 make clean make target1 target2 target3 cd ../sploits ls make ./sploit1 ./sploit1 ./sploit2 ./sploit2 cat sploit2.c less sploit2.c cd ../targets/ make target2 cd ../sploits ./sploit2 ./sploit3 cd ../targets make target1 cd ../ cd sploits ./sploit1 ifconfig ifup eth0 ifup eth0 ls ifup eth0 shutdown -h now  uW@@@E@E@cI@]]]]]]]]^^CE@E@cI@Pin:/usr/sbin:/sbin:${PATH}:${HOME}/bin" set prompt='[%n@%m %c]# '  @bQsGH&II XH'I,|H(I,PH(I 8H*I,H*I H+I,H+I H,I, H,I `t H-I,H H-I  H.I,T H.I,( H.I,H.I,H/IH/I (H/IH/I in/bash root:x:0:0:root:/root:/bin/bash bin:x:1:rootroot:x:0:0:root:/root:/bin/bash bin:x:1:1:bin:/bin:/sbin/nologin daemon:x:2:2:daemon:/sbin:/sbin/nologin adm:x:3:4:adm:/var/adm:/sbin/nologin lp:x:4:7:lp:/var/spool/lpd:/sbin/nologin sync:x:5:0:sync:/sbin:/bin/sync shutdown:x:6:0:shutdown:/sbin:/sbin/shutdown halt:x:7:0:halt:/sbin:/sbin/halt mail:x:8:12:mail:/var/spool/mail:/sbin/nologin news:x:9:13:news:/etc/news: uucp:x:10:14:uucp:/var/spool/uucp:/sbin/nologin operator:x:11:0:operator:/root:/sbin/nologin games:x:12:100:games:/usr/games:/sbin/nologin gopher:x:13:30:gopher:/var/gopher:/sbin/nologin ftp:x:14:50:FTP User:/var/ftp:/sbin/nologin nobody:x:99:99:Nobody:/:/sbin/nologin rpm:x:37:37::/var/lib/rpm:/bin/bash vcsa:x:69:69:virtual console memory owner:/dev:/sbin/nologin nscd:x:28:28:NSCD Daemon:/:/sbin/nologin sshd:x:74:74:Privilege-separated SSH:/var/empty/sshd:/sbin/nologin rpc:x:32:32:Portmapper RPC user:/:/sbin/nologin rpcuser:x:29:29:RPC Service User:/var/lib/nfs:/sbin/nologin nfsnobody:x:65534:65534:Anonymous NFS User:/var/li/d@ }8YI@# do not bell on tab-completion #set bell-style none set meta-flag on set input-meta on set convert-meta off set output-meta on # Completed names which are symbolic links to # directories have a slash appended. set mark-symlinked-directories on $if mode=emacs # for linux console and RH/Debian xterm "\e[1~": beginning-of-line "\e[4~": end-of-line "\e[5~": beginning-of-history "\e[6~": end-of-history "\e[3~": delete-char "\e[2~": quoted-insert "\e[5C": forward-word "\e[5D": backward-word # for rxvt "\e[8~": end-of-line # for non RH/Debian xterm, can't hurt for RH/DEbian xterm "\eOH": beginning-of-line "\eOF": end-of-line # for freebsd console "\e[H": beginning-of-line "\e[F": end-of-line $endif :d@/d@ }8YI@pW@ }8YI@# do not bell on tab-completion #set bell-style none set meta-flag on set input-meta on set convert-meta off set output-meta on # Completed names which are symbolic links to # directories have a slash appended. set mark-symlinked-directories on $if mode=emacs # for linux console and RH/Debian xterm "\e[1~": beginning-of-line "\e[4~": end-of-line "\e[5~": beginning-of-history "\e[6~": end-of-history "\e[3~": delete-char "\e[2~": quoted-insert "\e[5C": forward-word "\e[5D": backward-word # for rxvt "\e[8~": end-of-line # for non RH/Debian xterm, can't hurt for RH/DEbian xterm "\eOH": beginning-of-line "\eOF": end-of-line # for freebsd console "\e[H": beginning-of-line "\e[F": end-of-line $endif uW@f>YI@# # hosts.deny This file describes the names of the hosts which are # *not* allowed to use the local INET services, as decided # by the '/usr/sbin/tcpd' server. # # The portmap line is redundant, but it is left to remind you that # the new secure portmap uses hosts.deny and hosts.allow. In particular # you should know that NFS uses portmap! [@ }8YI@# # hosts.allow This file describes the names of the hosts which are # allowed to use the local INET services, as decided # by the '/usr/sbin/tcpd' server. # @ }8YI@order hosts,bind @ {9YI@ext3 ext2 nodev proc nodev devpts iso9660 vfat hfs 34<<4<jo>TI@viTI@TI@TI@#########################################################################################################$$$$$$${W@AJ>TI@viTI@TI@TI@viTI@TI@TI@viTI@TI@TI@#######\gZ>Z>TI@8#####MoW@Z>TI@(##<Z>Z>TI@#V@Z>TI@ddllttxx wKK,wKK wKK,wKK,pwKK dwKK,8wKK ,wKK,wKK KK,KK 0 KK, KQ, KhJ, KhJHd KyJ,8 KyJ KzJ,d KzJK,KKK,KK<KO,KOKO,KOKO,KOhHKO,KOU*OOPlibthread_db-1.0.solibm-2.3.2.solibm.so.6...AHV@C@aI@KKKKKKKKKKKKKKKKKKKKKKKKKK^@%q>aI@ld-2.3.2.so ^@aI@aI@KOKOOKOKOOx1OOhU*OOPlibthread_db-1.0.solibm-2.3.2.solibm.so.6...AH@C@aI@KKKKKKKKKKKKKKKKKKKKKKKKKK{W@%q>aI@ld-2.3.2.so {W@aI@aI@KOKOO1OOt_OO@IoOOsOO}OOlibpthread-0.10.solibc.so.6libpthread.so.0libc-2.3.2.solibm-2.3.2.solibm.so.6...A@C@aI@KKxKpLKKhV\Kd`^cK>P2.4.22-3um2.4.222.4.20-8...AV@L@L@KKi$?p\#d`.bash_profile.bash_history.bash_logout.bashrc...AW@@@KzJ=zJ{Ji$zJ|J7/zJRp\#dzJ}J`.bash_profile.Xclients.bash_logout.bashrc...A)@^@^@KyJ=yJTi$yJU7/yJZp\#dyJV`.bash_profile.Xclients.bash_logout.bashrc...A)@^@^@KhJ@=8qhJiJ0html...AH)@^@^@^@^@^@*H>*H>[I@# Sample stunnel configuration file # Copyright by Michal Trojnara 2002 # Comment it out on Win32 cert = /usr/etc/stunnel/mail.pem chroot = /usr/var/run/stunnel/ # PID is created inside chroot jail pid = /stunnel.pid setuid = nobody setgid = nogroup # Workaround for Eudora bug #options = DONT_INSERT_EMPTY_FRAGMENTS # Authentication stuff #verify = 2 # don't forget about c_rehash CApath # it is located inside chroot jail: #CApath = /certs # or simply use CAfile instead: #CAfile = /usr/etc/stunnel/certs.pem # Some debugging stuff #debug = 7 #output = stunnel.log # Use it for client mode #client = yes # Service-level configuration [pop3s] accept = 995 connect = 110 [imaps] accept = 993 connect = 143 [ssmtp] accept = 465 connect = 25 [s1] accept = 5000 connect = mail.osw.pl:110 # delay = yes [s2] accept = 5001 connect = mail.osw.pl:25 #[https] #accept = 443 #connect = 80 #TIMEOUTclose = 0 *H>*H>[I@..03C@C@[I@..03C@C@[I@...03@C@[I@C@Z>[I@..03@C@[I@T69@9Y/JHJA HJ,HJ HJ,HJ |H&J,PH&JHH(J, H(J H)J, H)J H*J,d H*JT H+J,( H+J H,J, H,J H-J, H-J H.J,t H.Jd H/J,8 H/J( H0J, H0J, H6J, H6JP H8J, H8J H9J,H9J , , ,,,,,,,,,,,,,,,,,,, ,!,",#,$,%,&,',(,),*,+,,,-,.,/,0,1,2,3,4,5,6,7,8,9,:,;,<,=,>,?,@,A,B,C,D,E,F,G,H,I,J,K,L,M,N,O,P,Q,R,S,T,U,V,W,X,Y,Z,[,\,],^,_,`,a,b,c,d,e,f,g,h,i,j,k,l,m,n,o,p,q,r,s,t,u,v,w,x,y,z,{,|,},~,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,D {W@h92>YI@# *REQUIRED* # Directory where mailboxes reside, _or_ name of file, relative to the # home directory. If you _do_ define both, MAIL_DIR takes precedence. # QMAIL_DIR is for Qmail # #QMAIL_DIR Maildir MAIL_DIR /var/spool/mail #MAIL_FILE .mail # Password aging controls: # # PASS_MAX_DAYS Maximum number of days a password may be used. # PASS_MIN_DAYS Minimum number of days allowed between password changes. # PASS_MIN_LEN Minimum acceptable password length. # PASS_WARN_AGE Number of days warning given before a password expires. # PASS_MAX_DAYS 99999 PASS_MIN_DAYS 0 PASS_MIN_LEN 5 PASS_WARN_AGE 7 # # Min/max values for automatic uid selection in useradd # UID_MIN 500 UID_MAX 60000 # # Min/max values for automatic gid selection in groupadd # GID_MIN 500 GID_MAX 60000 # # If defined, this command is run when removing a user. # It should remove any at/cron/print jobs etc. owned by # the user to be removed (passed as the first argument). # #USERDEL_CMD /usr/sbin/userdel_local # # If useradd should create home directories for users by default # On RH systems, we do. This option is ORed with the -m flag on # useradd command line. # CREATE_HOME yes d@J>YI@H6JHH@(6J7J0macros.specspo...AP@C@YI@H0JH{p0J2J, r0J3J,s0J4JAt0J5Jz0J1Jprt_dsfieldrt_tablesrt_scopesrt_realmsrt_protos...A@C@YI@rc.d/rc6.d 6W@YI@YI@rc.d/rc5.d 6W@YI@YI@rc.d/rc4.d 6W@YI@YI@rc.d/rc3.d 6W@YI@YI@rc.d/rc2.d 6W@YI@YI@rc.d/rc1.d 6W@YI@YI@rc.d/rc0.d 6W@YI@YI@rc.d/init.d 6W@YI@YI@H&J@H8Z&J'J0useradd...AH@C@YI@HJH>'JJJ%JP+J#Jev,J Je-J"JtRJ!J|J$Jmta-newaliasesmanmta-newaliasesmta-rmailmta-mailqmta-mailqmanmta-aliasesmanmta...A@C@YI@,,,%{W@E@YI@freebsd-ypxfrd 0…Sҡb)4&hTkKO,KOKO,KOKO,\KO\KO,KOKO,KOKO,XKOHKO,KO KO, KO KO, KO KO,p KO d KO,8 KO( KO, KO KO, KO KP, KPp KP,D KP, KP, KP KP, KP KP,h KPX KP,, KP$ KP, KP KP, KP KP,` KPP K P,$ K P K P, K PP:U;UU?U@UAUBUCUDUEUFUGUHUIUJUKULUMUNUOUPUQURUSUTUUUVUWUXUYUZU[U\U]U^U_U`UaUbUcUdUeUfUgUhUiUjUkUlUmUnUoUpUqUrUsUtUuUvUwUxUyUzU{U|U}U~UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUVVVVVVVVV V V V V VVVVVVVVVVVVVVVVVVV V!V"V#V$V%V&V'V(V)V*V+V,V-V.V/V0V1V2V3V4V5V6V7V8V9V:V;VV?V@VAVBVCVDVEVFVGVHVIVJVKVLVMVNVOVPVQVRVSVTVUVVVWVXVYVZV[V\V]V^V_V`VaVbVcVdVeVfVgVhViVjVkVlVmVnVoVpVqVrVsVtVuVvVwVxVyVzV{V|V}V~VVVVVVVVVVVVVVVVVm~!E@pbI@liblvm-10.so.1.0bI@bI@bI@liblvm-10.so.1.0bI@bI@bI@7U8U9U.{W@@?>bI@libtermcap.so.2.0.8{W@bI@bI@.U/U0U1U2U3U4U5U6UpW@(2>bI@Hlibpcre.so.0.0.1pW@bI@bI@libgcc_s-3.2.2-20030225.so.1^@bI@bI@&U'U(U)U*U+U,U-Utv^@ u[>bI@@libcrypto.so.0.9.7aV@bI@bI@libssl.so.0.9.7a@bI@bI@libacl.so.1.0.3{W@bI@bI@ U!U"U#U$U0K{W@m#7>bI@(libattr.so.1.0.1{W@bI@bI@UUU&E@{1>bI@libuuid.so.1.2bI@bI@bI@UU{W@7>bI@libss.so.2.0 bI@bI@bI@UUUU@>E@{1>bI@ libext2fs.so.2.4V@bI@bI@UUUUU HE@{1>bI@(R:@AFLHMHNHOHPHQHRHSHIIII U U UUUUUhaV@{1>bI@libcom_err.so.2.0V@bI@bI@@:D:V@{1>bI@%'_|/?LKOOPKO,$KOXKO,KOKO,dKO\KO,0KOKO, KO KO, KO KO,p KO` KO,4 KOHKO,KO KO,KOKO,KOKO,XKOHKO,KO KO,KOKO,KOKO,KO\LKO, KOKO,KO8KK,AKOLOMONOOOPOQOROSOTOUOVOWOXO,E@%q>aI@plibnsl-2.3.2.sooW@aI@aI@4O5O6O7O8O9O:O;OO?O@OAOBOCODOEOFOGOHOIOJOeoW@%q>aI@libm-2.3.2.so V@aI@aI@OOOOOOOOO O O O O OOOOOOOOOOOOOOOOOOO O!O"O#O$O%O&O'O(O)O*O+O,O-O.O/O0O1O2O3O;V@%q>aI@libdl-2.3.2.so{W@aI@aI@NNNN:{W@%q>aI@ libcrypt-2.3.2.sooW@aI@aI@NNNNNNt\oW@%q>aI@0libc-2.3.2.so {W@aI@aI@{M|M}M~MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMNNNNNNNNN N N N N NNNNNNNNNNNNNNNNNNN N!N"N#N$N%N&N'N(N)N*N+N,N-N.N/N0N1N2N3N4N5N6N7N8N9N:N;NN?N@NANBNCNDNENFNGNHNINJNKNLNMNNNONPNQNRNSNTNUNVNWNXNYNZN[N\N]N^N_N`NaNbNcNdNeNfNgNhNiNjNkNlNmNnNoNpNqNrNsNtNuNvNwNxNyNzN{N|N}N~NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN{W@%q>aI@ libanl-2.3.2.soaI@aI@aI@wMxMyMzM<8E@%q>aI@ rMsMtMuMvMDE@%q>aI@(libBrokenLocale-2.3.2.soaI@aI@aI@pMqME@%q>aI@libe2p.so.2.3 aI@aI@aI@KOPKH!OO0libe2fsim.1.2.1.so...AX@ C@aI@OOOt_OO@IoOOxsOOh05~OOPlibpthread-0.29.solibc.so.6libpthread.so.0libc-2.3.2.solibthread_db.so.1 UT]hUZ],<UZ] Uh],x Uh] Uv], Uv] U}],U}]defghijklmnopqrstuvwxyz{|}~¡áġšơǡȡɡʡˡ̡͡ΡϡСѡҡӡԡա֡סء١ڡۡܡݡޡߡ  !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~¢âĢŢƢǢȢɢʢˢ̢͢΢ϢТѢҢӢԢբ֢עآ٢ڢۢܢݢޢߢ  !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abc]{W@B@I@0Uv]UU <]E]O v]|]xv]z]hJJ/v]x]Xɨ>UUH>UU8rIv]y]( bv]w].hUU#r<]C]sUUxv]{]LC_MONETARYLC_PAPERLC_CTYPELC_COLLATELC_IDENTIFICATIONLC_MESSAGESLC_NUMERICLC_MEASUREMENTLC_ADDRESSLC_TELEPHONELC_TIMELC_NAME...A)@B@yI@Uh]UU h]r]O h]u]xh]p]hJJ/h]j]Xɨ>h]o]H>h]s]8rIh]m]( bh]i].hh]k]#rh]l]sh]t]xh]q]LC_MONETARYLC_PAPERLC_CTYPELC_COLLATELC_IDENTIFICATIONLC_MESSAGESLC_NUMERICLC_MEASUREMENTLC_ADDRESSLC_TELEPHONELC_TIMELC_NAME...A)@B@yI@UZ]UU Z]d]O Z]g]xZ]b]hJJ/Z]\]Xɨ>Z]a]H>Z]e]8rIZ]_]( bZ][].hZ]]]#rZ]^]sZ]f]xZ]c]LC_MONETARYLC_PAPERLC_CTYPELC_COLLATELC_IDENTIFICATIONLC_MESSAGESLC_NUMERICLC_MEASUREMENTLC_ADDRESSLC_TELEPHONELC_TIMELC_NAME...A)@B@yI@UT]UU T]V]O T]Y]xT]X]hJJ/UUXɨ>UUH>UU8rIT]U]( bT]W].hUU#rUUsUUxWWLC_MONETARYLC_PAPERLC_CTYPELC_COLLATELC_IDENTIFICATIONLC_MESSAGESLC_NUMERICLC_MEASUREMENTLC_ADDRESSLC_TELEPHONELC_TIMELC_NAME...Ho 0 o, o Xo,o o pr PXps,,ps <tu,AJ>AJ>I@Article 2913 of alt.sources: Path: oce-rd1!hp4nl!mcsun!uunet!munnari.oz.au!metro!cluster!swift!softway!otc!gregm From: gregm@otc.otca.oz.au (Greg McFarlif vif v:lang =~ "^ko" set fileencodings=euc-kr set guifontset=-*-*-medium-r-normal--16-*-*-*-*-*-*-* elseif v:lang =~ "^ja_JP" set fileencodings=euc-jp set guifontset=-misc-fixed-medium-r-normal--14-*-*-*-*-*-*-* elseif v:lang =~ "^zh_TW" set fileencodings=big5 set guifontset=-sony-fixed-medium-r-normal--16-150-75-75-c-80-iso8859-1,-taipei-fixed-medium-r-normal--16-150-75-75-c-160-big5-0 elseif v:lang =~ "^zh_CN" set fileencodings=gb2312 set guifontset=*-r-* endif if v:lang =~ "utf8$" || v:lang =~ "UTF-8$" set fileencodings=utf-8,latin1 endif set nocompatible " Use Vim defaults (much better!) set bs=2 " allow backspacing over everything in insert mode "set ai " always set autoindenting on "set backup " keep a backup file set viminfo='20,\"50 " read/write a .viminfo file, don't store more " than 50 lines of registers set history=50 " keep 50 lines of command line history set ruler " show the cursor position all the time " Only do this part when compiled with support for autocommands if has("autocmd") " In text files, always limit the width of text to 78 characters autocmd BufRead *.txt set tw=78 " When editing a file, always jump to the last cursor position autocmd BufReadPost * \ if line("'\"") > 0 && line ("'\"") <= line("$") | \ exe "normal g'\"" | \ endif endif " Don't use Ex mode, use Q for formatting map Q gq " Switch syntax highlighting on, when the terminal has colors " Also switch on highlighting the last used search pattern. if &t_Co > 2 || has("gui_running") syntax on set hlsearch endif if &term=="xterm" set t_Co=8 set t_Sb=^[4%dm set t_Sf=^[3%dm endif " some extra commands for HTML editing nm{W@AJ>I@" These macros swap the left and right mouse buttons (for left handed) " Don't forget to do ":set mouse=a" or the mouse won't work at all noremap noremap <2-LeftMouse> <2-RightMouse> noremap <3-LeftMouse> <3-RightMouse> noremap <4-LeftMouse> <4-RightMouse> noremap noremap noremap noremap <2-RightMouse> <2-LeftMouse> noremap <3-RightMouse> <3-LeftMouse> noremap <4-RightMouse> <4-LeftMouse> noremap noremap noremap g noremap g noremap! noremap! noremap! noremap! noremap! noremap! XAJ>AJ>I@s.getopts getopts imenu Builtins.hash hash imenu Builtins.newgrp newgrp imenu Builtins.pwd pwd imenu Builtins.read read imenu Builtins.readonly readonly imenu Builtins.return return imenu Builtins.times times imenu Builtins.type type imenu Builtins.umask umask imenu Builtins.wait wait imenu Set.set set imenu Set.unset unset imenu Set.mark modified or modified variables set -a imenu Set.exit when command returns non-zero exit code set -e imenu Set.Disable file name generation set -f imenu Set.remember function commands set -h imenu Set.All keyword arguments are placed in the environment set -k imenu Set.Read commands but do not execute them set -n imenu Set.Exit after reading and executing one command set -t imenu Set.Treat unset variables as an error when substituting set -u imenu Set.Print shell input lines as they are read set -v imenu Set.Print commands and their arguments as they are executed set -x ystem time --adjH0I,H0I (H1I,H1I P0 H2I, H2I0 H3I, H3I H7I, H7I H8I, H8I H9I,H9IH:I,H:I PdH;I,8H;IHH=I,H=I H# # /etc/nsswitch.conf # # An example Name Service Switch config file. This file should be # sorted with the most-used services at the beginning. # # The entry '[NOTFOUND=return]' means that the search for an # entry should stop if the search in the previous entry turned # up nothing. Note that if the search failed due to some other reason # (like no NIS server responding) then the search continues with the # next entry. # # Legal entries are: # # nisplus or nis+ Use NIS+ (NIS version 3) # nis or yp Use NIS (NIS version 2), also called YP # dns Use DNS (Domain Name Service) # files Use the local files # db Use the local database (.db) files # compat Use NIS on compat mode # hesiod Use Hesiod for user lookups # [NOTFOUND=return] Stop searching if not found so far # # To use db, put the "db" in front of "files" for entries you want to be # looked up first in the databases # # Example: #passwd: db files nisplus nis #shadow: db files nisplus nis #group: db files nisplus nis passwd: files shadow: files group: files #hosts: db files nisplus nis dns hosts: files dns # Example - obey only what nisplus tells us... #services: nisplus [NOTFOUND=return] files #networks: nisplus [NOTFOUND=return] files #protocols: nisplus [NOTFOUND=return] files #rpc: nisplus [NOTFOUND=return] files #ethers: nisplus [NOTFOUND=return] files #netmasks: nisplus [NOTFOUND=return] files bootparams: nisplus [NOTFOUND=ret{W@C@YI@H;I@H81[;IYI@(console vc/1 vc/2 vc/3 vc/4 vc/5 vc/6 vc/7 vc/8 vc/9 vc/10 vc/11 tty1 tty2 tty3 tty4 tty5 tty6 tty7 tty8 tty9 tty10 tty11 cua0 tty0 ttys/0 ttys/1 ttys/2 >_@^@^@++E@#F;YI@H3IHx3I6Ipi$3I4I`\#d3I5IP.bash_profile.bash_logout.bashrc...A@C@YI@H2I(H ...A0@1>YI@# /etc/profile # System wide environment and startup programs, for login setup # Functions and aliases go in /etc/bashrc pathmunge () { if ! echo $PATH | /bin/egrep -q "(^|:)$1($|:)" ; then if [ "$2" = "after" ] ; then PATH=$PATH:$1 else PATH=$1:$PATH fi fi } # Path manipulation if [ `id -u` = 0 ]; then pathmunge /sbin pathmunge /usr/sbin pathmunge /usr/local/sbin fi pathmunge /usr/X11R6/bin after unset pathmunge # No core files by default ulimit -S -c 0 > /dev/null 2>&1 USER="`id -un`" LOGNAME=$USER MAIL="/var/spool/mail/$USER" HOSTNAME=`/bin/hostname` HISTSIZE=1000 if [ -z "$INPUTRC" -a ! -f "$HOME/.inputrc" ]; then INPUTRC=/etc/inputrc fi export PATH USER LOGNAME MAIL HOSTNAME HISTSIZE INPUTRC for i in /etc/profile.d/*.sh ; do if [ -r "$i" ]; then . $i fi done unset i JpW@MP?P@PAPBPCPDPEPFPGPHPIPJPKPLPMPNPOPPPQPRPSPTPUPVPWPXPYPZP[P\P]P^P_P`PaPbPcPdPePfPgPhPiPjPkPlPmPnPoPpPqPrPsPtPuPvPwPxPyPzP{P|P}P~PPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPQQQQQQQQQ Q Q Q Q QQQQQQQQQQQQQQmT@}A>bI@*libutil-2.3.2.soV@aI@aI@OOOO1V@%q>aI@ libthread_db-1.0.so@aI@aI@OOOOOOV@%q>aI@0librt-2.3.2.soV@aI@aI@OOOOOOOOOOV@%q>aI@Plibresolv-2.3.2.soV@aI@aI@OOOOOOOOOOOOOOOOOOO+V@%q>aI@libpthread-0.10.soV@aI@aI@OOOOOOOOOOOOOOOOOOOOOOOOOOV@%q>aI@libnss_nisplus-2.3.2.soaI@aI@aI@{O|O}O~OOOOOOOOOOE@%q>aI@hlibnss_nis-2.3.2.soaI@aI@aI@pOqOrOsOtOuOvOwOxOyOzOE@%q>aI@Xlibnss_hesiod-2.3.2.soaI@aI@aI@kOlOmOnOoOTOE@%q>aI@(libnss_files-2.3.2.so{W@aI@aI@^O_O`OaObOcOdOeOfOgOhOiOjO{W@%q>aI@hlibnss_dns-2.3.2.so!@aI@aI@YOZO[O\O]OG!@%q>aI@(libnss_compat-2.3.2.soaI@aI@aI@ ,H,H H,H H,lH dH,8H  H,\ H HHH,HH,HH,HDHH,HHpAA^\@a@a@# # inittab This file describes how the INIT process should set up # the system in a certain run-level. # # Author: Miquel van Smoorenburg, # Modified for RHS Linux by Marc Ewing and Donnie Barnes # # Default runlevel. The runlevels used by RHS are: # 0 - halt (Do NOT set initdefault to this) # 1 - Single user mode # 2 - Multiuser, without NFS (The same as 3, if AV@a@a@# # inittab This file describes how the INIT process should set up # the system in a certain run-level. # # Author: Miquel van Smoorenburg, # Modified for RHS Linux by Marc Ewing and Donnie Barnes # # Default runlevel. The runlevels used by RHS are: # 0 - halt (Do NOT set initdefault to this) # 1 - Single user mode # 2 - Multiuser, without NFS (The same as 3, if you do not have networking) # 3 - Full multiuser mode # 4 - unused # 5 - X11 # 6 - reboot (Do NOT set initdefault to this) # id:3:initdefault: # System initialization. si::sysinit:/etc/rc.d/rc.sysinit l0:0:wait:/etc/rc.d/rc 0 l1:1:wait:/etc/rc.d/rc 1 l2:2:wait:/etc/rc.d/rc 2 l3:3:wait:/etc/rc.d/rc 3 l4:4:wait:/etc/rc.d/rc 4 l5:5:wait:/etc/rc.d/rc 5 l6:6:wait:/etc/rc.d/rc 6 # Trap CTRL-ALT-DELETE ca::ctrlaltdel:/sbin/shutdown -t3 -r now # When our UPS tells us power has failed, assume we have a few minutes # of power left. Schedule a shutdown for 2 minutes from now. # This does, of course, assume you have powerd installed and your # UPS connected and working correctly. pf::powerfail:/sbin/shutdown -f -h +2 "Power Failure; System Shutting Down" # If power was restored before the shutdown kicked in, cancel it. pr:12345:powerokwait:/sbin/shutdown -c "Power Restored; Shutdown Cancelled" # Run gettys in standard runlevels 0:2345:respawn:/sbin/mingetty ttys/0 1:2345:respawn:/sbin/mingetty ttys/1 2:2345:respawn:/sbin/mingetty ttys/2 #c:2345:respawn:/sbin/mingetty serial/0 # Run xdm in runlevel 5 x:5:respawn:/etc/X11/prefdm -nodaemon G@d@d@root:x:0:0:root:/root:/bin/bash bin:x:1:1:bin:/bin:/sbin/nologin daemon:x:2:2:daemon:/sbin:/sbin/nologin adm:x:3:4:adm:/var/adm:/sbin/nologin lp:x:4:7:lp:/var/spool/lpd:/sbin/nologin sync:x:5:0:sync:/sbin:/bin/sync shutdown:x:6:0:shutdown:/sbin:/sbin/shutdown halt:x:7:0:halt:/sbin:/sbin/halt mail:x:8:12:mail:/var/spool/mail:/sbin/nologin news:x:9:13:news:/etc/news: uucp:x:10:14:uucp:/var/spool/uucp:/sbin/nologin operator:x:11:0:operator:/root:/sbin/nologin games:x:12:100:games:/usr/games:/sbin/nologin gopher:x:13:30:gopher:/var/gopher:/sbin/nologin ftp:x:14:50:FTP User:/var/ftp:/sbin/nologin nobody:x:99:99:Nobody:/:/sbin/nologin rpm:x:37:37::/var/lib/rpm:/bin/bash vcsa:x:69:69:virtual console memory owner:/dev:/sbin/nologin nscd:x:28:28:NSCD Daemon:/:/sbin/nologin sshd:x:74:74:Privilege-separated SSH:/var/empty/sshd:/sbin/nologin rpc:x:32:32:Portmapper RPC user:/:/sbin/nologin rpcuser:x:29:29:RPC Service User:/var/lib/nfs:/sbin/nologin nfsnobody:x:65534:65534:Anonymous NFS User:/var/lib/nfs:/sbin/nologin mailnull:x:47:47::/var/spool/mqueue:/sbin/nologin smmsp:x:51:51::/var/spool/mqueue:/sbin/nologin pcap:x:77:77::/var/arpwatch:/sbin/nologin user:x:500:501::/home/user:/bin/bash {W@d@d@995d@d@d@995d@d@d@995d@d@d@!g)  ReIsEr2FsOHoM mICDEJbcvcv =ȀH=I 0H>I,H>I H?I,H?I  H@I, H@I`<HJ,HJ HJ,HJ @tItIـӀt-o#ident "#ident "#ident "@(#)rpc 1.11 95/07/14 SMI" /* SVr4.0 1.2 */ # # rpc # portmapper 100000 portmap sunrpc rpcbind rstatd 100001 rstat rup perfmeter rstat_svc rusersd 100002 rusers nfs 100003 nfsprog ypserv 100004 ypprog mountd 100005 mount showmount ypbind 100007 walld 100008 rwall shutdown yppasswdd 100009 yppasswd etherstatd 100010 etherstat rquotad 100011 rquotaprog quota rquota sprayd 100012 spray 3270_mapper 100013 rje_mapper 100014 selection_svc 100015 selnsvc database_svc 100016 rexd 100017 rex alis 100018 sched 100019 llockmgr 100020 nlockmgr 100021 x25.inr 100022 statmon 100023 status 100024 bootparam 100026 ypupdated 100028 ypupdate keyserv 100029 keyserver sunlink_mapper 100033 tfsd 100037 nsed 100038 nsemntd 100039 showfhd 100043 showfh ioadmd 100055 rpc.ioadmd NETlicense 100062 sunisamd 100065 debug_svc 100066 dbsrv ypxfrd 100069 rpc.ypxfrd bugtraqd 100071 kerbd 100078 event 100101 na.event # SunNet Manager logger 100102 na.logger # SunNet Manager sync 100104 na.sync hostperf 100107 na.hostperf activity 100109 na.activity # SunNet Manager hostmem 100112 na.hostmem sample 100113 na.sample x25 100114 na.x25 ping 100115 na.ping rpcnfs 100116 na.rpcnfs hostif 100117 na.hostif etherif 100118 na.etherif iproutes 100120 na.iproutes layers 100121 na.layers snmp 100122 na.snmp snmp-cmc snmp-synoptics snmp-unisys snmp-utk traffic 100123 na.traffic nfs_acl 100227 sadmind 100232 nisd 100300 rpc.nisd nispasswd 100303 rpc.nispasswdd ufsd 100233 ufsd pcnfsd 150001 pcnfs amd 300019 amq sgi_fam 391002 fam bwnfsd 545580417 fypxfrd 600100069 Oq>q>YI@{W@{W@{W@OH@IXHP@IJH@IaI@h@I|I8@II0 @II(a @II  @II @IIwd@IKD@IAIv@IDby@IJrc.localrc.sysinitinit.drc.sysinit~rc6.drc5.drc4.drc3.drc2.drc1.drc0.drc...A `@`@`@TZifp`p`epjp5`S`3އpiRK௳4~-౜QpgJ`|3pG,`\p'`;p`p`ƴ`Ĺ𿏲o„}Ovd_/XM|p:-^pW` @p9`ˈp#p`u@U 5peމpݩ`޾kp߉d`MpiF`~/pI(`^pW.G-7'ֶƵ`p`p`op_y`Oxp?[`/Zp(wp?b@opA`BOpCda`D/vpEDC`FXpG$%`GtI`IVJ`K8LMNOwPQapRlS@pTLU pV,oWpX`XpYn`Zp[P`\]2`^_``ica~0bIEc^d)'e=fDpgg&phipjݚkplƷ`mpn`oqpp{`qZrf]`s:tF?`uv/[vpx=xRyz4{|Qp}~3p EDTESTEWTEPTpW@C@YI@/usr/kerberos/lib E@#C@YI@urn] files ethers: files netmasks: files networks: files protocols: files rpc: files services: files netgroup: files publickey: nisplus automount: files aliases: files nisplus pZ Z Z Z =Z xZ Z Z )Z dZ Z Z Z PZ Z Z Z <#^J6q"]I5p!\ H8s]"p"]""]""]"!#]"\#]"#]"#]" $]"H$]"$]"$]"$]"4%]"o%]"%]"%]" &]"[&]"&]"&]" ']"G']"']"']"']"3(]"n(]"(]"(]")]"Z)]")]")]" *]"F*]"*]"*]"*]"2+]"m+]"+]"+]",]"Y,]",]",]" -]"E-]"-]"-]"-]"1.]"l.]".]".]"/]"X/]"/]"/]" 0]"D0]"0]"0]"0]"01]"k1]"1]"1]"2]"W2dCCdCCHHH&II H0IH=I HJA H9J HJ HJ HJHJ HJHJa HJ HJHJ! HmK HpK HKY HK HLHS HHHHHHHHH )))))))))))))))))))))))))))****** * * * * **** ********* *#*$*%*'*0*1*?*@*B*C*E*G*I*J*K*L*O*Q*R*S*T*V*W*X*Y*[*\*^*_*`*b*d*f*g*h*j*k*m*o*p*q*r*s*u*v*x*y*{*|*}*~************************** + +-+@+B+hYh{+|+( }++P++ +++L +++++0c z   `.+. *4** + +-+@+B+{+|+( }++++ +++L +++++.++ .4F+(3+5+6+7+ 8+9++D+G+W+X+Y+ [+Z+pa+\+b+c+g+L m+$\[]Ha8K,KHTK,(K0K,A X @E@A X @E@cI@K( ...A0)@1>[I@K@8K0user...AH@d@d@aHJ(HHHH'H2I)(HJ(HvK (HJ (H6J 3)HJ 9H=I yHJ nHJ HwK ۮH.I H H@I H3I H IHTJp H&Jh FH8IX  HJP  H:J@ lc HI0  HJ 6 H&I & HJ JHHJ ~HJ H LHK !HUJ VHJ -HdJ H)J hH*J H+J  H,J a H-J  H.J  H/J jHK HKx UAHHh 'oHK` >HJP HsK@ 6HJ0 8HJ HJ HJ 8H;I !HqK ,1"HJ d1"HK }#H0J  $HK <-%HK &HJ ^'HJ :~+HJ +HnK ,Hp J,H(I` ,HJP LF.H@ 1HJ0 o2H9J( 4HJ 06HJ 6HI f37H+I 8HpK 89HK 9HuK !u:H'I +;HK I uZHK ZHK ^>[HK {r\HJ \H0I z^HI _HJ _H9Ix `HJh ߚaHJ` ݦbHJP pcHVJH ~hHoK8 9hHJ( emHJ \mH,I %'nHmK oHJrHrHJ:HsHJsH-IttH*IH#uH8JvHJLwH7IOwHJp(xHrK`byHJXĬzHKHW|HH8}H1I0HJ mime.typesprofilemodules.confresolv.confrc.localldap.confjwhois.confprotocolsrc.sysinitlogin.defshost.confinputrclftp.confredhat-releaseinittablogrotate.confpinforchosts.denygpm-root.conf.fstab.swpmtools.confhotplugld.so.cachepasswd-initlog.confservicesat.denyprofile.dprintcapman.configwgetrcmodules.conf~aliasesld.so.confauto.miscopenldaplocaltimewarnquota.confshellsshadowaliases.db.pwd.locksysctl.confpcmciapasswdlogrotate.dadjtimesecurityfb.modesinit.dgroup-updfstab.confkrb.confcron.dexportsdumpdatesstunnelsudoershosts.allowbashrccron.weeklyupdfstab.conf.defaulttermcapDIR_COLORSioctl.saveDIR_COLORS.xtermfilesystemspasswd.lockminicom.userscron.monthlymailcapmail.rcfstab.rpmsaveanacrontabiproute2shadow~shadow-nscd.confxinetd.dcron.hourlylibuser.confcron.dailysyslog.confpam_smb.confkrb5.confyp.confsysconfigupdatedb.confsmrshrc6.drc5.drc4.drc3.drc2.drc1.drc0.dpam.dlog.dissuehostsgroupfstabfdprmalternativescsh.loginauto.mastercsh.cshrcmakedev.dcrontabsecurettydefaultissue.netgroup.lockskelrc.dmtabmotdmailisdnpwdb.confnsswitch.confsshrpmrpcrmtpppoptX11shadow.lockkrb.realmsXnn(n nnmnnnZnBnnn1n3nnNnDnDnEn#En_En`EnEnEn FnFnPFnQFnFnFnFnGnGn@GnInnnnnY!nEnFEnLn$SnPSn6SnSnTnTn| Tn TnTnfXnfXnOkXn`qHaKRRDS;F) P \c\i nsn{n1ns nMln4Gn}n?n"nM$n=0n0n<1nۊ1ng1n2Vn n2 nZ nZ јnZ nZ `nZ nZ nZ -nZ /nZ jnZ nZ nZ nZ CAnZ GAnZ JAnZ PAnnnn>nxnnn)ndnnnnPnnnn n҄nnǒnNnd"n[$nG0n0n=1nӋ1n1nin!@nnn.ninn1 nl n n n!nX!n!n!n "nC"n]"xn]"n]"n]"n]"ɒn]"on]" n]" 8,+r)/*+ **+ ++)))$H+-*;**)** ** *A**8 * * * * ** * + * * ++ +(+ $+(*4* +x 8**** * * * * * '+0++# +%UPbY fY( `Y *Q!O!!#$$$$w)u) )z)~))))))))))))) )))) )))))))H))))))))))))))))))))) )*)***!*))***"*&*)***+*,*.*2*3*5*6*7*9*:*<*=*>*N* F*D*]*e*P*n*t*Z*a*i*************************$W)s)t)v)x)y){)|)})))))),45bb2a6c61b1dadeaan`q H,HHH@8HJ0rc...0HHH('H2I )(HJ(HvK(HJ(H6J3)HJ9H=IyHJnHJHwKۮH.IH$H@IH3IHIHTJH&JFH8Ipf HI` HJX H:JHlc HI8 HJ(6 H&I& HJJHHJfdprmalternativescsh.loginauto.mastercsh.cshrcmakedev.dcrontab.inittab.swpsecurettydefaultissue.netgroup.lockskelrc.dmtabmotdmailisdnpwdb.confnsswitch.confsshrpmrpcrmtpppH@8HJ0rc...A jW@{W@{W@`qn ^dqn eqn fqn gqn |qnH lqnI rn ʾrn rn rn rn rnH sn sn snx snp snh sn` snX snP /snH ssn@ sn8 Dsn0 Msn( Usn ntn  Motn  gotn  uotn ptn tn \tn etn tn *tn Qtn atn ntn tn tn ctn tn tn tn 1vnC HvnCx  vn+p vn,h vn-` vn.X  vn/P ovnH ovn@ pvn8 qvn0 qvn( qvn qvn qvn 4rvn yrvn uvn Iwvn  Rxvn! [yvn# Զvn >vn~ wn wnK RwnL mwnM zwnN wnO xnH Xxn xn  xn5 b xn6x j!xn7p  "xn8h /"xn9` V"xn:X f"xn;P s"xn<H "xn=@ "xn>8 h&xn?0 'xn@( (xnA )xnC ߤxn ߤxn xn xnxnxnxnxnxnxnynynUynVynWynXynYynZyn[yn\:yn]x~yn^pyn_hNyn``WynaX`yncP znH zn@ zn8 zn0 zn( zn zn ""n)!Hn ^n ntpqic150ntpqic120psmouseatimouseirlpt15irlpt14irlpt13irlpt12irlpt11irlpt10fd7u3840fd7u3520fd7u3200fd7u2880fd7u1920fd7u1840fd7u1760fd7u1743fd7u1722fd7u1680fd7u1660fd7u1440fd7u1120fd7u1040inportbmircomm9ircomm8ircomm7ircomm6ircomm5ircomm4ircomm3ircomm2ircomm1ircomm0fd6u3840fd6u3520fd6u3200fd6u2880fd6u1920fd6u1840fd6u1760fd6u1743fd6u1722fd6u1680fd6u1660fd6u1440fd6u1120fd6u1040cm206cdcm205cdvpcmousefd7h1660fd7h1494fd7h1476fd7h1440fd7h1200ipstatemdspstatipmikcsfd5u3840fd5u3520fd5u3200fd5u2880fd5u1920fd5u1840fd5u1760fd5u1743fd5u1722fd5u1680fd5u1660fd5u1440fd5u1120fd5u1040fd6h1660fd6h1494fd6h1476fd6h1440fd6h1200tpqic150tpqic120fd4u3840fd4u3520fd4u3200fd4u2880fd4u1920fd4u1840fd4u1760fd4u1743fd4u1722fd4u1680fd4u1660fd4u1440fd4u1120fd4u1040fd5h1660fd5h1494fd5h1476fd5h1440fd5h1200fd3u3840fd3u3520fd3u3200fd3u2880fd3u1920fd3u1840fd3u1760fd3u1743fd3u1722fd3u1680fd3u1660fd3u1440fd3u1120fd3u1040initctlfd4h1660fd4h1494fd4h1476fd4h1440fd4h1200fd7CompaQvttunerfd2u3840fd2u3520fd2u3200fd2u2880fd2u1920 Pot remove the follHK `HK,4HK HK,HK @ HK, HK  H,h H @( H, H H ,H  8HC,tH$ H$ H$ PH$ HH$ Pt up # the system in a certain run/dev/dev/ubd/0 / reiserfs rw 0 0 none /proc proc rw 0 0 /dev/ubd/0 / reiserfs rw 0 0 none /proc proc rw 0 0 devfs /dev devfs rw 0 0 none /dev/pts devpts rw,gid=5,mode=620 0 0 none /mnt hostfs rw 0 0 N@ZL@ZL@Eroot:$1$qeyVsurN$UGGO5W0/GVAOWYGQ3cDb7/:12429:0:99999:7::: bin:*:12429:0:99999:7::: daemon:*:12429:0:99999:7::: adm:*:12429:0:99999:7::: lp:*:12429:0:99999:7::: sync:*:12429:0:99999:7::: shutdown:*:12429:0:99999:7::: halt:*:12429:0:99999:7::: mail:*:12429:0:99999:7::: news:*:12429:0:99999:7::: uucp:*:12429:0:99999:7::: operator:*:12429:0:99999:7::: games:*:12429:0:99999:7::: gopher:*:12429:0:99999:7::: ftp:*:12429:0:99999:7::: nobod/dev/ubd/0 / reiserfs rw 0 0 none /proc /dev/dev/ubd/0 / reiserfs rw 0 0 none /proc proc rw 0 0 devfs /dev devfs rw 0 0 none /dev/pts devpts rw,gid=5,mode=620 0 0 none /mnt hostfs rw 0 0 {W@{W@{W@Mroot:x:0:root bin:x:1:root,bin,daemon daemon:x:2:root,bin,daemon sys:x:3:root,bin,adm adm:x:4:root,adm,daemon tty:x:5: disk:x:6:root lp:x:7:daemon,lp mem:x:8: kmem:x:9: wheel:x:10:root mail:x:12:mail news:x:13:news uucp:x:14:uucp man:x:15: games:x:20: gopher:x:30: dip:x:40: ftp:x:50: lock:x:54: nobody:x:99: users:x:100: rpm:x:37: floppy:x:19: vcsa:x:69: utmp:x:22: nscd:x:28: slocate:x:21: sshd:x:74: rpc:x:32: rpcuser:x:29: nfsnobody:x:65534: mailnull:x:47: smmsp:x:51: pcap:x:77: xfs:x:43: ntp:x:38: gdm:x:42: canna:x:39: lie:x:500: named:x:25: user:x:501: 1sW@d@d@root:aGCTmR/1FMHZg:12432:0:99999:7::: bin:*:12429:0:99999:7::: daemon:*:12429:0:99999:7::: adm:*:12429:0:99999:7::: lp:*:12429:0:99999:7::: sync:*:12429:0:99999:7::: shutdown:*:12429:0:99999:7::: halt:*:12429:0:99999:7::: mail:*:12429:0:99999:7::: news:*:12429:0:99999:7::: uucp:*:12429:0:99999:7::: operator:*:12429:0:99999:7::: games:*:12429:0:99999:7::: gopher:*:12429:0:99999:7::: ftp:*:12429:0:99999:7::: nobody:*:12429:0:99999:7::: rpm:!!:12429:0:99999:7::: vcsa:!!:12429:0:99999:7::: nscd:!!:12429:0:99999:7::: sshd:!!:12429:0:99999:7::: rpc:!!:12429:0:99999:7::: rpcuser:!!:12429:0:99999:7::: nfsnobody:!!:12429:0:99999:7::: mailnull:!!:12429:0:99999:7::: smmsp:!!:12429:0:99999:7::: pcap:!!:12429:0:99999:7::: user:VGDJElapVGXyU:12432:0:99999:7::: pW@d@d@  @@3N<@V@V@LABEL=/1 / ext2 defaults 1 1 none /dev/pts devpts gid=5,mode=620 0 0 none /proc proc defaults 0 0 none /dev/shm tmpfs defaults 0 0 /dev/hda3 swap swap defaults 0 0 |E@;C@[I@root:::root bin:::root,bin,daemon daemon:::root,bin,daemon sys:::root,bin,adm adm:::root,adm,daemon tty::: disk:::root lp:::daemon,lp mem::: kmem::: wheel:::root mail:::mail news:::news uucp:::uucp man::: games::: gopher::: dip::: ftp::: lock::: nobody::: users::: rpm:x:: floppy:x:: vcsa:x:: utmp:x:: nscd:x:: slocate:x:: sshd:x:: rpc:x:: rpcuser:x:: nfsnobody:x:: mailnull:x:: smmsp:x:: pcap:x:: user:!:: guest:!:: c@^@^@nameserver 192.168.0.254 !@^@^@.0.148 redhat9 redhat9.goober.org 192.168.0.151 turbolinux7 turbolinux7.goober.org 192.168.0.250 uml-test uml-test.goober.org 192.168.0.254 router xdisplay   ,T <, PJLde,de0df,ldf(Ddg,dg0 dh, di, di p dj,D dj h dk, dk XX dl,, dl l d,@ d d, d P d,x d ` ,4 0 ,  ,X  @ ,  T #S1T #SU $SzT  $SSx $SSp $SSh $ST` $# .bash_profile # Get the aliases and functions if [ -f ~/.bashrc ]; then . ~/.bashrc fi # User specific environment and startup programs PATH=$PATH:$HOME/bin export PATH unset USERNAME X@d@d@# ~/.bash_logout clear 0@d@d@# .bashrc # User specific aliases and functions # Source global definitions if [ -f /etc/bashrc ]; then . /etc/bashrc fi |X@d@d@cd /mnt/home/lie/ppt cd /mnt/home/lie/pp1 ls cd sploits/ gdb ./sploit2 gdb ./sploit2 gdb ./sploit2 ./sploit2 ./sploit2 gdb ./sploit2 ./sploit2 ls cd /mnt/home/lie/ ls cd pp1/ ls cd targets/ ls cd .. cd sploits/ ./sploit2 printenv EGG make sploit2 ./sploit2 make sploit2 ./sploit2 make sploit2 ./sploit2 make sploit2 ./sploit2 make sploit2 ./sploit2 printenv EGG ./sploit2 ls make sploit2 ./sploit2 cd ../targets/ make target2 cd ../sploits/ ls make sploit2 ./sploit2 |& less ./sploit2 | less ./sploit2 gdb ../targets/target2 cd ../targets/ make target2 cd ../ ls cd sploits/ make sploit2 ./sploit2 make sploit2 ./sploit2 make sploit2 ./sp# .bash_profile # Get the aliases and functions if [ -f ~/.bashrc ]; then . ~/.bashrc fi # User specific environment and startup programs PATH=$PATH:$HOME/bin export PATH unset USERNAME X@d@d@# ~/.bash_logout clear 0@d@d@# .bashrc # User specific aliases and functions # Source global definitions if [ -f /etc/bashrc ]; then . /etc/bashrc fi |X@d@d@gY@0@0@d# module id L@L@L@Z# ieee1394 module match_flags vendor_id model_id specifier_id version IL@L@L@Z# module pattern L@L@L@Z# usb module match_flags idVendor idProduct bcdDevice_lo bcdDevice_hi bDeviceClass bDeviceSubClass bDeviceProtocol bInterfaceClass bInterfaceSubClass bInterfaceProtocol driver_info L@L@L@Z# isapnp module cardvendor carddevice driver_data vendor function ... QL@L@L@Z# pci module vendor device subvendor subdevice class class_mask driver_data cL@L@L@Z# module id=string L@L@L@Z@L@L@Zdg(Kd ...A0@L@L@Z/mnt/homH# .bash_profile # Get the aliases and functions if [ -f ~/.bashrc ]; then . ~/.bashrc fi # User specific environment and startup programs PATH=$PATH:$HOME/bin export PATH unset USERNAME X@d@d@# ~/.bash_logout clear 0@d@d@# .bashrc # User specific aliases and functions # Source global definitions if [ -f /etc/bashrc ]; then . /etc/bashrc fi }(     9 & ' efA eh ei el en    !   $' $* $. $09 $2A $5$: $; $? $@ $A $D $H $I $J $L $MQ $P $R $T $Y $Z $` $c $f $i $j $l $n $o  q      Ĝ ŜƜ ǜȜ ˜̜ ϜМ Ϝќ ϜӜ ڜۜ ڜݜ ڜߜ ڜ ڜ ڜ ڜ ڜ ڜ  ڜ A   y   A   9      ! # ) , . 1 5 7q ; > ?i AA D x `]ĝ"˝͝˝͝)˝͝@h˝͝˝͝˝ϝԝH ]q)  +,./0123 4 :tHuT   ־   < d  X <l   <  | L ! "%\RSTU efoP pq rs tP wLx yD|}h ~ l |Tt8(   p L \X x  x@¿lſ<ÿĿtX  h Te |(|DD.mm߃ဃ18q<0w?'? ZY[HJ H HJ, HJ <HJ,HJ(HJ,HJHJ,HJ HJ ile describes how the INIT process should set up # the system in a certain run-level. # # Author: Miquel van Smoorenburg, # Modified for RHS Linux by Marc Ewing and Donnie Barnes # # Default runlevel. The runlevels used by RHS are: # 0 - halt (Do NOT set initdefault to this) # 1 - Single user mode # 2 - Multiuser, without NFS (The same as 3, if you do not have networking) # 3 - Full multiuser mode # 4 - unused # 5 - X11 # 6 - reboot (Do NOT set initdefault to this) # id:3:initdefault: # System initialization. si::sysinit:/etc/rc.d/rc.sysinit l0:0:wait:/etc/rc.d/rc 0 l1:1:wait:/etc/rc.d/rc 1 l2:2:wait:/etc/rc.d/rc 2 l3:3:wait:/etc/rc.d/rc 3 l4:4:wait:/etc/rc.d/rc 4 l5:5:wait:/etc/rc.d/rc 5 l6:6:wait:/etc/rc.d/rc 6 # Trap CTRL-ALT-DELETE ca::ctrlaltdel:/sbin/shutdown -t3 -r now # When our UPS tells us power has failed, assume we have a few minutes # of/dev/dev/ubd/0 / reiserfs defaults 1 1 none /dev/pts devpts gid=5,mode=620 0 0 none /proc proc defaults 0 0 /dev/ubd/1 none swap sw {W@L@L@rc.d/rc#F@ZI@ZI@HJH JJ JJJJJJO7JJ(_JJdJJpOgJJhGGjJJXkJJHlJJ@LlmJJ0OtJJ(}PwJJ JJchap-secretsipv6-uppluginsip-down.ipv6to4ip-downpap-secretsip-up.ipv6to4optionsipv6-downpppoe-server-optionsfirewall-standalonepeersip-upioptionsfirewall-masq...A@C@ZI@# /etc/fdprm - floppy disk parameter table # Common disk formats. Names are of the form # actual media capacity/maximum drive capacity # (Note: although 5.25" HD drives can format disks at 1.44M, they're listed # as 1200 because that's the common maximum size.) # size sec/t hds trk stre gap rate spec1 fmt_gap 360/360 720 9 2 40 0 0x2A 0x02 0xDF 0x50 1200/1200 2400 15 2 80 0 0x1B 0x00 0xDF 0x54 360/720 720 9 2 40 1 0x2A 0x02 0xDF 0x50 720/720 1440 9 2 80 0 0x2A 0x02 0xDF 0x50 720/1440 1440 9 2 80 0 0x2A 0x02 0xDF 0x50 360/1200 720 9 2 40 1 0x23 0x01 0xDF 0x50 720/1200 1440 9 2 80 0 0x23 0x01 0xDF 0x50 1440/1440 2880 18 2 80 0 0x1B 0x00 0xCF 0x6C # Non-standard disk formats: # BEWARE: They're incomplete and possibly incorrect. The only reason why # they are in this file is to show how such formats are added. 1440/1200 2880 18 2 80 0 ???? ???? ???? ???? # ????? 1680/1440 3360 21 2 80 0 0x0C 0x00 0xCF 0x6C # ????? # Add user-specific formats here cbm1581 1600 10 2 80 2 0x2A 0x02 0xDF 0x2E 800/720 1600 10 2 80 0 0x2A 0x02 0xDF 0x2E Z>Z>ZI@# Log all kernel messages to the console. # Logging much else clutters up the screen. #kern.* /dev/console # Log anything (except mail) of level info or higher. # Don't log private authentication messages! *.info;mail.none;authpriv.none;cron.none /var/log/messages # The authpriv file has restricted access. authpriv.* /var/log/secure # Log all the mail messages in one place. mail.* /var/log/maillog # Log cron stuff cron.* /var/log/cron # Everybody gets emergency messages *.emerg * # Save news errors of level crit and higher in a special file. uucp,news.crit /var/log/spooler # Save boot messages also to boot.log local7.* /var/log/boot.log 5hYReIsErLB =ȀH=I 0H>I,H>I H?I,H?I  H@I, H@I`<HJ,HJ HJ,HJ @tItIـӀt-o#ident "#ident "#ident "@(#)rpc 1.11 95/07/14 SMI" /* SVr4.0 1.2 */ # # rpc # portmapper 100000 portmap sunrpc rpcbind rstatd 100001 rstat rup perfmeter rstat_svc rusersd 100002 rusers nfs 100003 nfsprog ypserv 100004 ypprog mountd 100005 mount showmount ypbind 100007 walld 100008 rwall shutdown yppasswdd 100009 yppasswd etherstatd 100010 etherstat rquotad 100011 rquotaprog quota rquota sprayd 100012 spray 3270_mapper 100013 rje_mapper 100014 selection_svc 100015 selnsvc database_svc 100016 rexd 100017 rex alis 100018 sched 100019 llockmgr 100020 nlockmgr 100021 x25.inr 100022 statmon 100023 status 100024 bootparam 100026 ypupdated 100028 ypupdate keyserv 100029 keyserver sunlink_mapper 100033 tfsd 100037 nsed 100038 nsemntd 100039 showfhd 100043 showfh ioadmd 100055 rpc.ioadmd NETlicense 100062 sunisamd 100065 debug_svc 100066 dbsrv ypxfrd 100069 rpc.ypxfrd bugtraqd 100071 kerbd 100078 event 100101 na.event # SunNet Manager logger 100102 na.logger # SunNet Manager sync 100104 na.sync hostperf 100107 na.hostperf activity 100109 na.activity # SunNet Manager hostmem 100112 na.hostmem sample 100113 na.sample x25 100114 na.x25 ping 100115 na.ping rpcnfs 100116 na.rpcnfs hostif 100117 na.hostif etherif 100118 na.etherif iproutes 100120 na.iproutes layers 100121 na.layers snmp 100122 na.snmp snmp-cmc snmp-synoptics snmp-unisys snmp-utk traffic 100123 na.traffic nfs_acl 100227 sadmind 100232 nisd 100300 rpc.nisd nispasswd 100303 rpc.nispasswdd ufsd 100233 ufsd pcnfsd 150001 pcnfs amd 300019 amq sgi_fam 391002 fam bwnfsd 545580417 fypxfrd 600100069 Oq>q>YI@{W@W@W@OH@IXHP@IJH@IaI@h@I|I8@II0 @II(a @II  @II @IIwd@IKD@IAIv@IDby@IJrc.localrc.sysinitinit.drc.sysinit~rc6.drc5.drc4.drc3.drc2.drc1.drc0.drc...A `@`@`@TZifp`p`epjp5`S`3އpiRK௳4~-౜QpgJ`|3pG,`\p'`;p`p`ƴ`Ĺ𿏲o„}Ovd_/XM|p:-^pW` @p9`ˈp#p`u@U 5peމpݩ`޾kp߉d`MpiF`~/pI(`^pW.G-7'ֶƵ`p`p`op_y`Oxp?[`/Zp(wp?b@opA`BOpCda`D/vpEDC`FXpG$%`GtI`IVJ`K8LMNOwPQapRlS@pTLU pV,oWpX`XpYn`Zp[P`\]2`^_``ica~0bIEc^d)'e=fDpgg&phipjݚkplƷ`mpn`oqpp{`qZrf]`s:tF?`uv/[vpx=xRyz4{|Qp}~3p EDTESTEWTEPTpW@C@YI@/usr/kerberos/lib E@#C@YI@urn] files ethers: files netmasks: files networks: files protocols: files rpc: files services: files netgroup: files publickey: nisplus automount: files aliases: files nisplus !g)  ReIsEr2FsOHoM mICDEJbcvcv50c!+P!#,vhY+*.{+#:`tReIsErLB!g) ReIsEr2FsRHoM mIJJJJEJbcvcvot remove the follHK `HK,4HK HK,HK @ HK, HK  H,h H @( H, H H ,H  8HC,tHC lHC hH$ PH$ HH$ Pt up # the system in a certain run/dev/dev/ubd/0 / reiserfs rw 0 0 none /proc proc rw 0 0 /dev/ubd/0 / reiserfs rw 0 0 none /proc proc rw 0 0 devfs /dev devfs rw 0 0 none /dev/pts devpts rw,gid=5,mode=620 0 0 none /mnt hostfs rw 0 0 N@ZL@ZL@Eroot:$1$qeyVsurN$UGGO5W0/GVAOWYGQ3cDb7/:12429:0:99999:7::: bin:*:12429:0:99999:7::: daemon:*:12429:0:99999:7::: adm:*:12429:0:99999:7::: lp:*:12429:0:99999:7::: sync:*:12429:0:99999:7::: shutdown:*:12429:0:99999:7::: halt:*:12429:0:99999:7::: mail:*:12429:0:99999:7::: news:*:12429:0:99999:7::: uucp:*:12429:0:99999:7::: operator:*:12429:0:99999:7::: games/dev/dev/ubd/0 / reiserfs defaults 1 1 none /dev/pts devpts gid=5,mode=620 0 0 none /proc proc defaults 0 0 #/dev/ubd/1 none swap sw W@W@W@Proot:x:0:root bin:x:1:root,bin,daemon daemon:x:2:root,bin,daemon sys:x:3:root,bin,adm adm:x:4:root,adm,daemon tty:x:5: disk:x:6:root lp:x:7:daemon,lp mem:x:8: kmem:x:9: wheel:x:10:root mail:x:12:mail news:x:13:news uucp:x:14:uucp man:x:15: games:x:20: gopher:x:30: dip:x:40: ftp:x:50: lock:x:54: nobody:x:99: users:x:100: rpm:x:37: floppy:x:19: vcsa:x:69: utmp:x:22: nscd:x:28: slocate:x:21: sshd:x:74: rpc:x:32: rpcuser:x:29: nfsnobody:x:65534: mailnull:x:47: smmsp:x:51: pcap:x:77: xfs:x:43: ntp:x:38: gdm:x:42: canna:x:39: lie:x:500: named:x:25: user:x:501: 1sW@d@d@root:aGCTmR/1FMHZg:12432:0:99999:7::: bin:*:12429:0:99999:7::: daemon:*:12429:0:99999:7::: adm:*:12429:0:99999:7::: lp:*:12429:0:99999:7::: sync:*:12429:0:99999:7::: shutdown:*:12429:0:99999:7::: halt:*:12429:0:99999:7::: mail:*:12429:0:99999:7::: news:*:12429:0:99999:7::: uucp:*:12429:0:99999:7::: operator:*:12429:0:99999:7::: games:*:12429:0:99999:7::: gopher:*:12429:0:99999:7::: ftp:*:12429:0:99999:7::: nobody:*:12429:0:99999:7::: rpm:!!:12429:0:99999:7::: vcsa:!!:12429:0:99999:7::: nscd:!!:12429:0:99999:7::: sshd:!!:12429:0:99999:7::: rpc:!!:12429:0:99999:7::: rpcuser:!!:12429:0:99999:7::: nfsnobody:!!:12429:0:99999:7::: mailnull:!!:12429:0:99999:7::: smmsp:!!:12429:0:99999:7::: pcap:!!:12429:0:99999:7::: user:VGDJElapVGXyU:12432:0:99999:7::: pW@d@d@  @@3N<@V@V@LABEL=/1 / ext2 defaults 1 1 none /dev/pts devpts gid=5,mode=620 0 0 none /proc proc defaults 0 0 none /dev/shm tmpfs defaults 0 0 /dev/hda3 swap swap defaults 0 0 |E@;C@[I@root:::root bin:::root,bin,daemon daemon:::root,bin,daemon sys:::root,bin,adm adm:::root,adm,daemon tty::: disk:::root lp:::daemon,lp mem::: kmem::: wheel:::root mail:::mail news:::news uucp:::uucp man::: games::: gopher::: dip::: ftp::: lock::: nobody::: users::: rpm:x:: floppy:x:: vcsa:x:: utmp:x:: nscd:x:: slocate:x:: sshd:x:: rpc:x:: rpcuser:x:: nfsnobody:x:: mailnull:x:: smmsp:x:: pcap:x:: user:!:: guest:!:: c@^@^@nameserver 192.168.0.254 !@^@^@.0.148 redhat9 redhat9.goober.org 192.168.0.151 turbolinux7 turbolinux7.goober.org 192.168.0.250 uml-test uml-test.goober.org 192.168.0.254 router xdisplay pZ Z Z Z =Z xZ Z Z )Z dZ Z Z Z PZ Z Z Z <#^J6q"]I5p!\ H8s]"p"]""]""]"!#]"\#]"#]"#]" $]"H$]"$]"$]"$]"4%]"o%]"%]"%]" &]"[&]"&]"&]" ']"G']"']"']"']"3(]"n(]"(]"(]")]"Z)]")]")]" *]"F*]"*]"*]"*]"2+]"m+]"+]"+]",]"Y,]",]",]" -]"E-]"-]"-]"-]"1.]"l.]".]".]"/]"X/]"/]"/]" 0]"D0]"0]"0]"0]"01]"k1]"1]"1]"2]"W2dCCdCCHHH&II H0IH=I HJA H9J HJ HJ HJHJ HJHJa HJ HJHJ! HmK HpK HKY HK HLHS HHHHHHHHH )))))))))))))))))))))))))))****** * * * * **** ********* *#*$*%*'*0*1*?*@*B*C*E*G*I*J*K*L*O*Q*R*S*T*V*W*X*Y*[*\*^*_*`*b*d*f*g*h*j*k*m*o*p*q*r*s*u*v*x*y*{*|*}*~************************** + +-+@+B+hY{+|+( }++P++ +++L +++++0c z   `.+. *4** + +-+@+B+{+|+( }++++ +++L +++++.++ .4F+(3+5+6+7+ 8+9++D+G+W+X+Y+ [+Z+pa+\+b+c+g+L m+D\[]HaK,KHtK,HK0K,A A X A X @E@A X @E@cI@K( ...A0)@1>[I@K@8K0user...AH@d@d@aHJH HHH 'H2I )(HJ (HvK (HJ (H6J 3)HJ 9H=I yHJ nHJ HwK ۮH.I H H@Ix H3Ip H` IHTJP H&JH FH8I8  HJ0  H:J lc HI  HJ 6 H&I & HJ JHHJ ~HC H LHK !HUJ VHJ -HdJ H)J hH*J H+J  H,J a H-J  H.Jx  H/Jp jHKh HKX UAHHH 'oHK@ >HJ0 HsK 6HJ 8HJ HJ HJ 8H;I !HqK ,1"HJ d1"HK }#H0J  $HK <-%HK &HJ ^'HJ :~+HJp +HnK` ,HP J,H(I@ ,HJ0 LF.H 1HJ o2H9J 4HJ 06HJ 6HI f37H+I 8HpK 89HK 9HuK !u:H'I +;HK I uZHK ZHK ^>[HK {r\HJ \H0Ix z^HIh _HJ` _H9IX `HJH ߚaHJ@ ݦbHJ0 pcHVJ( ~hHoK emHJ \mH,I%'nHmKoHJrHrHJ:HsHJsH-IttH*IH#uH8JvHJLwH7IpOwHJ`(xHrKPbyHJHĬzHK8W|HH(}H1I HJmime.typesprofilemodules.confresolv.confrc.localldap.confjwhois.confprotocolsrc.sysinitlogin.defshost.confinputrclftp.confredhat-releaseinittablogrotate.confpinforchosts.denygpm-root.confmtools.confhotplugld.so.cachepasswd-initlog.confservicesat.denyprofile.dprintcapman.configwgetrcmodules.conf~aliasesld.so.confauto.miscopenldaplocaltimewarnquota.confshellsshadowaliases.db.pwd.locksysctl.confpcmciapasswdlogrotate.dadjtimesecurityfb.modesinit.dgroup-updfstab.confkrb.confcron.dexportsdumpdatesstunnelsudoershosts.allowbashrccron.weeklyupdfstab.conf.defaulttermcapDIR_COLORSioctl.saveDIR_COLORS.xtermfilesystemspasswd.lockminicom.userscron.monthlymailcapmail.rcfstab.rpmsaveanacrontabiproute2shadow~shadow-nscd.confxinetd.dcron.hourlylibuser.confcron.dailysyslog.confpam_smb.confkrb5.confyp.confsysconfigupdatedb.confsmrshrc6.drc5.drc4.drc3.drc2.drc1.drc0.dpam.dlog.dissuehostsgroupfstabfdprmalternativescsh.loginauto.mastercsh.cshrcmakedev.dcrontabsecurettydefaultissue.netgroup.lockskelrc.dmtabmotdmailisdnpwdb.confnsswitch.confsshrpmrpcrmtpppoptX11shadow.lockkrb.realmsXnn(n nnmnnnZnBnnn1n3nnNnDnDnEn#En_En`EnEnEn FnFnPFnQFnFnFnFnGnGn@GnInnnnnY!nEnFEnLn$SnPSn6SnSnTnTn| Tn TnTnfXnfXnOkXn`qHaKRRDS;F) P \c\i nsn{n1ns nMln4Gn}n?n"nM$n=0n0n<1nۊ1ng1n2Vn n2 nZ nZ јnZ nZ `nZ nZ nZ -nZ /nZ jnZ nZ nZ nZ CAnZ GAnZ JAnZ PAnnnn>nxnnn)ndnnnnPnnnn n҄nnǒnNnd"n[$nG0n0n=1nӋ1n1nin!@nnn.ninn1 nl n n n!nX!n!n!n "nC"n]"xn]"n]"n]"n]"ɒn]"on]" n]" 8,+r)/*+ **+ ++)))$H+-*;**)** ** *A**8 * * * * ** * + * * ++ +(+ $+(*4* +x 8**** * * * * * '+0++# +%UPbY fY( `Y *Q!O!!#$$$$w)u) )z)~))))))))))))) )))) )))))))H))))))))))))))))))))) )*)***!*))***"*&*)***+*,*.*2*3*5*6*7*9*:*<*=*>*N* F*D*]*e*P*n*t*Z*a*i*************************$W)s)t)v)x)y){)|)})))))),45bb2a6c61b1dadeaan`q H,HHH@8HJ0rc...0HHH('H2I )(HJ(HvK(HJ(H6J3)HJ9H=IyHJnHJHwKۮH.IH$H@IH3IHIHTJH&JFH8Ipf HI` HJX H:JHlc HI8 HJ(6 H&I& HJJHHJfdprmalternativescsh.loginauto.mastercsh.cshrcmakedev.dcrontab.inittab.swpsecurettydefaultissue.netgroup.lockskelrc.dmtabmotdmailisdnpwdb.confnsswitch.confsshrpmrpcrmtpppH@8HJ0rc...A `jW@W@W@`qn ^dqn eqn fqn gqn |qnH lqnI rn ʾrn rn rn rn rnH sn sn snx snp snh sn` snX snP /snH ssn@ sn8 Dsn0 Msn( Usn ntn  Motn  gotn  uotn ptn tn \tn etn tn *tn Qtn atn ntn tn tn ctn tn tn tn 1vnC HvnCx  vn+p vn,h vn-` vn.X  vn/P ovnH ovn@ pvn8 qvn0 qvn( qvn qvn qvn 4rvn yrvn uvn Iwvn  Rxvn! [yvn# Զvn >vn~ wn wnK RwnL mwnM zwnN wnO xnH Xxn xn  xn5 b xn6x j!xn7p  "xn8h /"xn9` V"xn:X f"xn;P s"xn<H "xn=@ "xn>8 h&xn?0 'xn@( (xnA )xnC ߤxn ߤxn xn xnxnxnxnxnxnxnynynUynVynWynXynYynZyn[yn\:yn]x~yn^pyn_hNyn``WynaX`yncP znH zn@ zn8 zn0 zn( zn zn ""n)!Hn ^n ntpqic150ntpqic120psmouseatimouseirlpt15irlpt14irlpt13irlpt12irlpt11irlpt10fd7u3840fd7u3520fd7u3200fd7u2880fd7u1920fd7u1840fd7u1760fd7u1743fd7u1722fd7u1680fd7u1660fd7u1440fd7u1120fd7u1040inportbmircomm9ircomm8ircomm7ircomm6ircomm5ircomm4ircomm3ircomm2ircomm1ircomm0fd6u3840fd6u3520fd6u3200fd6u2880fd6u1920fd6u1840fd6u1760fd6u1743fd6u1722fd6u1680fd6u1660fd6u1440fd6u1120fd6u1040cm206cdcm205cdvpcmousefd7h1660fd7h1494fd7h1476fd7h1440fd7h1200ipstatemdspstatipmikcsfd5u3840fd5u3520fd5u3200fd5u2880fd5u1920fd5u1840fd5u1760fd5u1743fd5u1722fd5u1680fd5u1660fd5u1440fd5u1120fd5u1040fd6h1660fd6h1494fd6h1476fd6h1440fd6h1200tpqic150tpqic120fd4u3840fd4u3520fd4u3200fd4u2880fd4u1920fd4u1840fd4u1760fd4u1743fd4u1722fd4u1680fd4u1660fd4u1440fd4u1120fd4u1040fd5h1660fd5h1494fd5h1476fd5h1440fd5h1200fd3u3840fd3u3520fd3u3200fd3u2880fd3u1920fd3u1840fd3u1760fd3u1743fd3u1722fd3u1680fd3u1660fd3u1440fd3u1120fd3u1040initctlfd4h1660fd4h1494fd4h1476fd4h1440fd4h1200fd7CompaQvttunerfd2u3840fd2u3520fd2u3200fd2u2880fd2u1920  ,T <, PJLde,de0df,ldf(Ddg,dg0 dh, di, di p dj,D dj h dk, dk XX dl,, dl l d,@ d d, d P d,x d ` ,4 0 ,  ,X  @ ,  T #S1T #SU $SzT  $SSx $SSp $SSh $ST` $# .bash_profile # Get the aliases and functions if [ -f ~/.bashrc ]; then . ~/.bashrc fi # User specific environment and startup programs PATH=$PATH:$HOME/bin export PATH unset USERNAME X@d@d@# ~/.bash_logout clear 0@d@d@# .bashrc # User specific aliases and functions # Source global definitions if [ -f /etc/bashrc ]; then . /etc/bashrc fi |X@d@d@cd /mnt/home/lie/ppt cd /mnt/home/lie/pp1 ls cd sploits/ gdb ./sploit2 gdb ./sploit2 gdb ./sploit2 ./sploit2 ./sploit2 gdb ./sploit2 ./sploit2 ls cd /mnt/home/lie/ ls cd pp1/ ls cd targets/ ls cd .. cd sploits/ ./sploit2 printenv EGG make sploit2 ./sploit2 make sploit2 ./sploit2 make sploit2 ./sploit2 make sploit2 ./sploit2 make sploit2 ./sploit2 printenv EGG ./sploit2 ls make sploit2 ./sploit2 cd ../targets/ make target2 cd ../sploits/ ls make sploit2 ./sploit2 |& less ./sploit2 | less ./sploit2 gdb ../targets/target2 cd ../targets/ make target2 cd ../ ls cd sploits/ make sploit2 ./sploit2 make sploit2 ./sploit2 make sploit2 ./sp# .bash_profile # Get the aliases and functions if [ -f ~/.bashrc ]; then . ~/.bashrc fi # User specific environment and startup programs PATH=$PATH:$HOME/bin export PATH unset USERNAME X@d@d@# ~/.bash_logout clear 0@d@d@# .bashrc # User specific aliases and functions # Source global definitions if [ -f /etc/bashrc ]; then . /etc/bashrc fi |X@d@d@gY@0@0@d# module id L@L@L@Z# ieee1394 module match_flags vendor_id model_id specifier_id version IL@L@L@Z# module pattern L@L@L@Z# usb module match_flags idVendor idProduct bcdDevice_lo bcdDevice_hi bDeviceClass bDeviceSubClass bDeviceProtocol bInterfaceClass bInterfaceSubClass bInterfaceProtocol driver_info L@L@L@Z# isapnp module cardvendor carddevice driver_data vendor function ... QL@L@L@Z# pci module vendor device subvendor subdevice class class_mask driver_data cL@L@L@Z# module id=string L@L@L@Z@L@L@Zdg(Kd ...A0@L@L@Z/mnt/homH# .bash_profile # Get the aliases and functions if [ -f ~/.bashrc ]; then . ~/.bashrc fi # User specific environment and startup programs PATH=$PATH:$HOME/bin export PATH unset USERNAME X@d@d@# ~/.bash_logout clear 0@d@d@# .bashrc # User specific aliases and functions # Source global definitions if [ -f /etc/bashrc ]; then . /etc/bashrc fi }(     9 & ' efA eh ei el en    !   $' $* $. $09 $2A $5$: $; $? $@ $A $D $H $I $J $L $MQ $P $R $T $Y $Z $` $c $f $i $j $l $n $o  q      Ĝ ŜƜ ǜȜ ˜̜ ϜМ Ϝќ ϜӜ ڜۜ ڜݜ ڜߜ ڜ ڜ ڜ ڜ ڜ ڜ  ڜ A   y   A   9      ! # ) , . 1 5 7q ; > ?i AA D x `]ĝ"˝͝˝͝)˝͝@h˝͝˝͝˝ϝԝH ]q)  +,./0123 4 :tHuT   ־   < d  X <l   <  | L ! "%\RSTU efoP pq rs tP wLx yD|}h ~ l |Tt8(   p L \X x  x@¿lſ<ÿĿtX  h Te |(|DD.mm߃ဃ18q<0w?'? =ȀH=I 0H>I,H>I H?I,H?I  H@I, H@I`<HJ,HJ @HJ @HJ @tItIـӀt-o#ident "#ident "#ide#ident "@(#)rpc 1.11 95/07/14 SMI" /* SVr4.0#ident "@(#)rpc 1.11 95/07/14 SMI" /* SVr4.0 1.2 */ # # rpc # portmapper 100000 portmap sunrpc rpcbind rstatd 100001 rstat rup perfmeter rstat_svc rusersd 100002 rusers nfs 100003 nfsprog ypserv 100004 ypprog mountd 100005 mount showmount ypbind 100007 walld 100008 rwall shutdown yppasswdd 100009 yppasswd etherstatd 100010 etherstat rquotad 100011 rquotaprog quota rquota sprayd 100012 spray 3270_mapper 100013 rje_mapper 100014 selection_svc 100015 selnsvc database_svc 100016 rexd 100017 rex alis 100018 sched 100019 llockmgr 100020 nlockmgr 100021 x25.inr 100022 statmon 100023 status 100024 bootparam 100026 ypupdated 100028 ypupdate keyserv 100029 keyserver sunlink_mapper 100033 tfsd 100037 nsed 100038 nsemntd 100039 showfhd 100043 showfh ioadmd 100055 rpc.ioadmd NETlicense 100062 sunisamd 100065 debug_svc 100066 dbsrv ypxfrd 100069 rpc.ypxfrd bugtraqd 100071 kerbd 100078 event 100101 na.event # SunNet Manager logger 100102 na.logger # SunNet Manager sync 100104 na.sync hostperf 100107 na.hostperf activity 100109 na.activity # SunNet Manager hostmem 100112 na.hostmem sample 100113 na.sample x25 100114 na.x25 ping 100115 na.ping rpcnfs 100116 na.rpcnfs hostif 100117 na.hostif etherif 100118 na.etherif iproutes 100120 na.iproutes layers 100121 na.layers snmp 100122 na.snmp snmp-cmc snmp-synoptics snmp-unisys snmp-utk traffic 100123 na.traffic nfs_acl 100227 sadmind 100232 nisd 100300 rpc.nisd nispasswd 100303 rpc.nispasswdd ufsd 100233 ufsd pcnfsd 150001 pcnfs amd 300019 amq sgi_fam 391002 fam bwnfsd 545580417 fypxfrd 600100069 Oq>q>YI@H@IXHP@IJH@IaI@h@I|I8@II0 @II(a @II  @II @IIwd@IKD@IAIv@IDby@IJrc.localrc.sysinitinit.drc.sysinit~rc6.drc5.drc4.drc3.drc2.drc1.drc0.drc...A `@`@`@TZifp`p`epjp5`S`3އpiRK௳4~-౜QpgJ`|3pG,`\p'`;p`p`ƴ`Ĺ𿏲o„}Ovd_/XM|p:-^pW` @p9`ˈp#p`u@U 5peމpݩ`޾kp߉d`MpiF`~/pI(`^pW.G-7'ֶƵ`p`p`op_y`Oxp?[`/Zp(wp?b@opA`BOpCda`D/vpEDC`FXpG$%`GtI`IVJ`K8LMNOwPQapRlS@pTLU pV,oWpX`XpYn`Zp[P`\]2`^_``ica~0bIEc^d)'e=fDpgg&phipjݚkplƷ`mpn`oqpp{`qZrf]`s:tF?`uv/[vpx=xRyz4{|Qp}~3p EDTESTEWTEPTpW@C@YI@/usr/kerberos/lib E@#C@YI@urn] files ethers: files netmasks: files networks: files protocols: files rpc: files services: files netgroup: files publickey: nisplus automount: files aliases: files nisplus 4ZY[HJ H HJ, HJ <HJ,HJ(HJ,HJHJ,HJ HJ ile describes how the INIT process should set up # the system in a certain run-level. # # Author: Miquel van Smoorenburg, # Modified for RHS Linux by Marc Ewing and Donnie Barnes # # Default runlevel. The runlevels used by RHS are: # 0 - halt (Do NOT set initdefault to this) # 1 - Single user mode # 2 - Multiuser, without NFS (The same as 3, if you do not have networking) # 3 - Full multiuser mode # 4 - unused # 5 - X11 # 6 - reboot (Do NOT set initdefault to this) # id:3:initdefault: # System initialization. si::sysinit:/etc/rc.d/rc.sysinit l0:0:wait:/etc/rc.d/rc 0 l1:1:wait:/etc/rc.d/rc 1 l2:2:wait:/etc/rc.d/rc 2 l3:3:wait:/etc/rc.d/rc 3 l4:4:wait:/etc/rc.d/rc 4 l5:5:wait:/etc/rc.d/rc 5 l6:6:wait:/etc/rc.d/rc 6 # Trap CTRL-ALT-DELETE ca::ctrlaltdel:/sbin/shutdown -t3 -r now # When our UPS tells us power has failed, assume we have a few minutes # of/dev/dev/ubd/0 / reiserfs defaults 1 1 none /dev/pts devpts gid=5,mode=620 0 0 none /proc proc defaults 0 0 /dev/ubd/1 none swap sw {W@L@W@rc.d/rc#F@ZI@ZI@HJH JJ JJJJJJO7JJ(_JJdJJpOgJJhGGjJJXkJJHlJJ@LlmJJ0OtJJ(}PwJJ JJchap-secretsipv6-uppluginsip-down.ipv6to4ip-downpap-secretsip-up.ipv6to4optionsipv6-downpppoe-server-optionsfirewall-standalonepeersip-upioptionsfirewall-masq...A@C@ZI@# /etc/fdprm - floppy disk parameter table # Common disk formats. Names are of the form # actual media capacity/maximum drive capacity # (Note: although 5.25" HD drives can format disks at 1.44M, they're listed # as 1200 because that's the common maximum size.) # size sec/t hds trk stre gap rate spec1 fmt_gap 360/360 720 9 2 40 0 0x2A 0x02 0xDF 0x50 1200/1200 2400 15 2 80 0 0x1B 0x00 0xDF 0x54 360/720 720 9 2 40 1 0x2A 0x02 0xDF 0x50 720/720 1440 9 2 80 0 0x2A 0x02 0xDF 0x50 720/1440 1440 9 2 80 0 0x2A 0x02 0xDF 0x50 360/1200 720 9 2 40 1 0x23 0x01 0xDF 0x50 720/1200 1440 9 2 80 0 0x23 0x01 0xDF 0x50 1440/1440 2880 18 2 80 0 0x1B 0x00 0xCF 0x6C # Non-standard disk formats: # BEWARE: They're incomplete and possibly incorrect. The only reason why # they are in this file is to show how such formats are added. 1440/1200 2880 18 2 80 0 ???? ???? ???? ???? # ????? 1680/1440 3360 21 2 80 0 0x0C 0x00 0xCF 0x6C # ????? # Add user-specific formats here cbm1581 1600 10 2 80 2 0x2A 0x02 0xDF 0x2E 800/720 1600 10 2 80 0 0x2A 0x02 0xDF 0x2E Z>Z>ZI@# Log all kernel messages to the console. # Logging much else clutters up the screen. #kern.* /dev/console # Log anything (except mail) of level info or higher. # Don't log private authentication messages! *.info;mail.none;authpriv.none;cron.none /var/log/messages # The authpriv file has restricted access. authpriv.* /var/log/secure # Log all the mail messages in one place. mail.* /var/log/maillog # Log cron stuff cron.* /var/log/cron # Everybody gets emergency messages *.emerg * # Save news errors of level crit and higher in a special file. uucp,news.crit /var/log/spooler # Save boot messages also to boot.log local7.* /var/log/boot.log -,$,=,|=X$ J, J N, N , x ,L 0 ,  , D ,`  @  ,    ,    ,    ,t  T  ,  4 ,  ,` X ,,  ,d,\T,( ,,,|,PV@TI@TI@edTI@TI@TI@A!B!C!D!E!F!G!H!I!J!K!01>01>TI@X !!!!!!!!! ! ! ! ! !!!!!!!!!!!!!!!!!!! !!!"!#!$!%!&!'!(!)!*!+!,!-!.!/!0!1!2!3!4!5!6!7!8!9!:!;!!?!@!}V@1>TI@@bashTI@TI@TI@` a b c d e f g h i j k l m n o p q r s t u v w x y z { | } ~  l pW@H>TI@[ \ ] ^ _ xD72>72>TI@(hostnameTI@TI@TI@bashpW@TI@TI@N O P Q R S T U V W X Y Z UM>UM>TI@h9 : ; < = > ? @ A B C D E F G H I J K L M L I> I>SI@6 7 8 #pW@ I>SI@hostnameSI@SI@SI@hostnameSI@SI@SI@. / 0 1 2 3 4 5 `x@Z>SI@@   ! " # $ % & ' ( ) * + , -  W@Z>SI@  @`2>SI@       oR2>R2>SI@8hostnameSI@SI@SI@ڿۿܿݿT<^@|^@|^@ qֿ׿ؿٿ`;^@|^@|^@ q=PHSK%yJP82KhJ(Ȫ2KyJɪ2KzJ7zJKNGNJINN:\HwJ:\HxJR\HLX\HS[\HX]\H[_\H\pa\H_`a\H`PnHvJ@18605_1906218604_4054418604_4054318604_4054018604_4053918604_4053618604_4053118604_4052418604_1906418604_190632_405262_405222_4047419066_1935219355_1906619355_1906519355_1904819065_40528...A X)@@@V@V@V@/\c@\c@\c@ wKK,wKK wKK,wKK,pwKK dwKK,8wKK ,wKK,wKK KK,KK 0 KK, KQ, KhJ, KhJHd KyJ,8 KyJ KzJ,d KzJK,KKK,KK<KO,KOKO,KOKO,KOhHKO,KOU*OOPlibthread_db-1.0.solibm-2.3.2.solibm.so.6...AHV@C@aI@KKKKKKKKKKKKKKKKKKKKKKKKKK^@%q>aI@ld-2.3.2.so ^@aI@aI@KOKOOKOKOOx1OOhU*OOPlibthread_db-1.0.solibm-2.3.2.solibm.so.6...AH@C@aI@KKKKKKKKKKKKKKKKKKKKKKKKKKW@%q>aI@ld-2.3.2.so W@aI@aI@KOKOO1OOt_OO@IoOOsOO}OOlibpthread-0.10.solibc.so.6libpthread.so.0libc-2.3.2.solibm-2.3.2.solibm.so.6...A@C@aI@KKxKpLKKhV\Kd`^cK>P2.4.22-3um2.4.222.4.20-8...AV@L@L@KKi$?p\#d`.bash_profile.bash_history.bash_logout.bashrc...AW@@@KzJ=zJ{Ji$zJ|J7/zJRp\#dzJ}J`.bash_profile.Xclients.bash_logout.bashrc...A)@^@^@KyJ=yJTi$yJU7/yJZp\#dyJV`.bash_profile.Xclients.bash_logout.bashrc...A)@^@^@KhJ@=8qhJiJ0html...AH)@^@^@^@^@^@*H>*H>[I@# Sample stunnel configuration file # Copyright by Michal Trojnara 2002 # Comment it out on Win32 cert = /usr/etc/stunnel/mail.pem chroot = /usr/var/run/stunnel/ # PID is created inside chroot jail pid = /stunnel.pid setuid = nobody setgid = nogroup # Workaround for Eudora bug #options = DONT_INSERT_EMPTY_FRAGMENTS # Authentication stuff #verify = 2 # don't forget about c_rehash CApath # it is located inside chroot jail: #CApath = /certs # or simply use CAfile instead: #CAfile = /usr/etc/stunnel/certs.pem # Some debugging stuff #debug = 7 #output = stunnel.log # Use it for client mode #client = yes # Service-level configuration [pop3s] accept = 995 connect = 110 [imaps] accept = 993 connect = 143 [ssmtp] accept = 465 connect = 25 [s1] accept = 5000 connect = mail.osw.pl:110 # delay = yes [s2] accept = 5001 connect = mail.osw.pl:25 #[https] #accept = 443 #connect = 80 #TIMEOUTclose = 0 *H>*H>[I@..03C@C@[I@..03C@C@[I@...03@C@[I@C@Z>[I@..03@C@[I@T69@9Y/JHJA HJ,HJ HJ,HJ |H&J,PH&JHH(J, H(J H)J, H)J H*J,d H*JT H+J,( H+J H,J, H,J H-J, H-J H.J,t H.Jd H/J,8 H/J( H0J, H0J, H6J, H6JP H8J, H8J H9J,H9J , , ,,,,,,,,,,,,,,,,,,, ,!,",#,$,%,&,',(,),*,+,,,-,.,/,0,1,2,3,4,5,6,7,8,9,:,;,<,=,>,?,@,A,B,C,D,E,F,G,H,I,J,K,L,M,N,O,P,Q,R,S,T,U,V,W,X,Y,Z,[,\,],^,_,`,a,b,c,d,e,f,g,h,i,j,k,l,m,n,o,p,q,r,s,t,u,v,w,x,y,z,{,|,},~,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,D {W@h92>YI@# *REQUIRED* # Directory where mailboxes reside, _or_ name of file, relative to the # home directory. If you _do_ define both, MAIL_DIR takes precedence. # QMAIL_DIR is for Qmail # #QMAIL_DIR Maildir MAIL_DIR /var/spool/mail #MAIL_FILE .mail # Password aging controls: # # PASS_MAX_DAYS Maximum number of days a password may be used. # PASS_MIN_DAYS Minimum number of days allowed between password changes. # PASS_MIN_LEN Minimum acceptable password length. # PASS_WARN_AGE Number of days warning given before a password expires. # PASS_MAX_DAYS 99999 PASS_MIN_DAYS 0 PASS_MIN_LEN 5 PASS_WARN_AGE 7 # # Min/max values for automatic uid selection in useradd # UID_MIN 500 UID_MAX 60000 # # Min/max values for automatic gid selection in groupadd # GID_MIN 500 GID_MAX 60000 # # If defined, this command is run when removing a user. # It should remove any at/cron/print jobs etc. owned by # the user to be removed (passed as the first argument). # #USERDEL_CMD /usr/sbin/userdel_local # # If useradd should create home directories for users by default # On RH systems, we do. This option is ORed with the -m flag on # useradd command line. # CREATE_HOME yes d@J>YI@H6JHH@(6J7J0macros.specspo...AP@C@YI@H0JH{p0J2J, r0J3J,s0J4JAt0J5Jz0J1Jprt_dsfieldrt_tablesrt_scopesrt_realmsrt_protos...A@C@YI@rc.d/rc6.d 6W@YI@YI@rc.d/rc5.d 6W@YI@YI@rc.d/rc4.d 6W@YI@YI@rc.d/rc3.d 6W@YI@YI@rc.d/rc2.d 6W@YI@YI@rc.d/rc1.d 6W@YI@YI@rc.d/rc0.d 6W@YI@YI@rc.d/init.d 6W@YI@YI@H&J@H8Z&J'J0useradd...AH@C@YI@HJH>'JJJ%JP+J#Jev,J Je-J"JtRJ!J|J$Jmta-newaliasesmanmta-newaliasesmta-rmailmta-mailqmta-mailqmanmta-aliasesmanmta...A@C@YI@,,,%W@E@YI@freebsd-ypxfrd %'_|/?LKOOPKO,$KOXKO,KOKO,dKO\KO,0KOKO, KO KO, KO KO,p KO` KO,4 KOHKO,KO KO,KOKO,KOKO,XKOHKO,KO KO,KOKO,KOKO,KO\LKO, KOKO,KO8KK,AKOLOMONOOOPOQOROSOTOUOVOWOXO,E@%q>aI@plibnsl-2.3.2.sooW@aI@aI@4O5O6O7O8O9O:O;OO?O@OAOBOCODOEOFOGOHOIOJOeoW@%q>aI@libm-2.3.2.so V@aI@aI@OOOOOOOOO O O O O OOOOOOOOOOOOOOOOOOO O!O"O#O$O%O&O'O(O)O*O+O,O-O.O/O0O1O2O3O;V@%q>aI@libdl-2.3.2.so{W@aI@aI@NNNN:{W@%q>aI@ libcrypt-2.3.2.sooW@aI@aI@NNNNNNt\oW@%q>aI@0libc-2.3.2.so W@aI@aI@{M|M}M~MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMNNNNNNNNN N N N N NNNNNNNNNNNNNNNNNNN N!N"N#N$N%N&N'N(N)N*N+N,N-N.N/N0N1N2N3N4N5N6N7N8N9N:N;NN?N@NANBNCNDNENFNGNHNINJNKNLNMNNNONPNQNRNSNTNUNVNWNXNYNZN[N\N]N^N_N`NaNbNcNdNeNfNgNhNiNjNkNlNmNnNoNpNqNrNsNtNuNvNwNxNyNzN{N|N}N~NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNW@%q>aI@ libanl-2.3.2.soaI@aI@aI@wMxMyMzM<8E@%q>aI@ rMsMtMuMvMDE@%q>aI@(libBrokenLocale-2.3.2.soaI@aI@aI@pMqME@%q>aI@libe2p.so.2.3 aI@aI@aI@KOPKH!OO0libe2fsim.1.2.1.so...AX@ C@aI@OOOt_OO@IoOOxsOOh05~OOPlibpthread-0.29.solibc.so.6libpthread.so.0libc-2.3.2.solibthread_db.so.1 UT]hUZ],<UZ] Uh],x Uh] Uv], Uv] U}],U}]defghijklmnopqrstuvwxyz{|}~¡áġšơǡȡɡʡˡ̡͡ΡϡСѡҡӡԡա֡סء١ڡۡܡݡޡߡ  !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~¢âĢŢƢǢȢɢʢˢ̢͢΢ϢТѢҢӢԢբ֢עآ٢ڢۢܢݢޢߢ  !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abc]W@B@I@0Uv]UU <]E]O v]|]xv]z]hJJ/v]x]Xɨ>UUH>UU8rIv]y]( bv]w].hUU#r<]C]sUUxv]{]LC_MONETARYLC_PAPERLC_CTYPELC_COLLATELC_IDENTIFICATIONLC_MESSAGESLC_NUMERICLC_MEASUREMENTLC_ADDRESSLC_TELEPHONELC_TIMELC_NAME...A)@B@yI@Uh]UU h]r]O h]u]xh]p]hJJ/h]j]Xɨ>h]o]H>h]s]8rIh]m]( bh]i].hh]k]#rh]l]sh]t]xh]q]LC_MONETARYLC_PAPERLC_CTYPELC_COLLATELC_IDENTIFICATIONLC_MESSAGESLC_NUMERICLC_MEASUREMENTLC_ADDRESSLC_TELEPHONELC_TIMELC_NAME...A)@B@yI@UZ]UU Z]d]O Z]g]xZ]b]hJJ/Z]\]Xɨ>Z]a]H>Z]e]8rIZ]_]( bZ][].hZ]]]#rZ]^]sZ]f]xZ]c]LC_MONETARYLC_PAPERLC_CTYPELC_COLLATELC_IDENTIFICATIONLC_MESSAGESLC_NUMERICLC_MEASUREMENTLC_ADDRESSLC_TELEPHONELC_TIMELC_NAME...A)@B@yI@UT]UU T]V]O T]Y]xT]X]hJJ/UUXɨ>UUH>UU8rIT]U]( bT]W].hUU#rUUsUUxWWLC_MONETARYLC_PAPERLC_CTYPELC_COLLATELC_IDENTIFICATIONLC_MESSAGESLC_NUMERICLC_MEASUREMENTLC_ADDRESSLC_TELEPHONELC_TIMELC_NAME... ]j"b?hHS xHX,LHX t H[,H H[ (H\,H\ H_,H`,H,H xH xH xH x # the system in a certain run-level. # # Author: Miquel van Smoorenburg, # Modified for RHS Linux by Marc Ewing and Donnie Barnes # # Default runlevel. The runlevels used by RHS are: # 0 - halt (Do NOT set initdefault to this) # 1 - Single user mode # 2 - Multiuser, without NFS (The same as 3, if you do not have networking) # 3 - Full multiuser mode # 4 - unused # 5 - X11 # 6 - reboot (Do NOT set initdefault to this) # id:3:initdefault: # System initialization. si::sysinit:/etc/rc.d/rc.sysinit l0:0:wait:/etc/rc.d/rc 0 l1:1:wait:/etc/rc.d/rc 1 l2:2:wait:/etc/rc.d/rc 2 l3:3:wait:/etc/rc.d/rc 3 l4:4:wait:/etc/rc.d/rc 4 l5:5:wait:/etc/rc.d/rc 5 l6:6:wait:/etc/rc.d/rc 6 # Trap CTRL-ALT-DELETE ca::ctrlaltdel:/s/dev/dev/ubd/0 / reiserfs rw 0 0 none /proc proc rw 0 0 devfs /dev devfs rw 0 0 none /dev/pts devpts rw,gid=5,mode=620 0 0 /dev/dev/ubd/0 / reiserfs rw 0 0 none /proc proc rw 0 0 devfs /dev devfs rw 0 0 none /dev/pts devpts rw,gid=5,mode=620 0 0 wW@V@V@'d@d@d@d@d@d@/dev/ubd/0 / reiserfs defaults 1 1 none /dev/pts devpts gid=5,mode=620 0 0 /proc /proc proc defaults devpts /dev/pts devpts mode=0622 0 0 /dev/ubd/1 none swap sw vc@`@`@root:$1$KPFogygu$dbsUjEt/UmyUFxVV59S2c/::1:0:180:7::: bin:*:12429:0:99999:7::: daemon:*:12429:0:99999:7::: adm:*:12429:0:99999:7::: lp:*:12429:0:99999:7::: sync:*:12429:0:99999:7::: shutdown:*:12429:0:99999:7::: halt:*:12429:0:99999:7::: mail:*:12429:0:99999:7::: news:*:12429:0:99999:7::: uucp:*:12429:0:99999:7::: operator:*:12429:0:99999:7::: games:*:12429:0:99999:7::: gopher:*:12429:0:99999:7::: ftp:*:12429:0:99999:7::: nobody:*:12429:0:99999:7::: rpm:!!:12429:0:99999:7::: vcsa:!!:12429:0:99999:7::: nscd:!!:12429:0:99999:7::: sshd:!!:12429:0:99999:7::: rpc:!!:12429:0:99999:7::: rpcuser:!!:12429:0:99999:7::: nfsnobody:!!:12429:0:99999:7::: mailnull:!!:12429:0:99999:7::: smmsp:!!:12429:0:99999:7::: pcap:!!:12429:0:99999:7::: user:3u4m4NSvQhox.:1:0:180:7::: guest:3uuv3hPCRvisc:1:0:180:7:::  c@`@`@root:x:0:0:root:/root:/bin/bash bin:x:1:1:bin:/bin:/sbin/nologin daemon:x:2:2:daemon:/sbin:/sbin/nologin adm:x:3:4:adm:/var/adm:/sbin/nologin lp:x:4:7:lp:/var/spool/lpd:/sbin/nologin sync:x:5:0:sync:/sbin:/bin/sync shutdown:x:6:0:shutdown:/sbin:/sbin/shutdown halt:x:7:0:halt:/sbin:/sbin/halt mail:x:8:12:mail:/var/spool/mail:/sbin/nologin news:x:9:13:news:/etc/news: uucp:x:10:14:uucp:/var/spool/uucp:/sbin/nologin operator:x:11:0:operator:/root:/sbin/nologin games:x:12:100:games:/usr/games:/sbin/nologin gopher:x:13:30:gopher:/var/gopher:/sbin/nologin ftp:x:14:50:FTP User:/var/ftp:/sbin/nologin nobody:x:99:99:Nobody:/:/sbin/nologin rpm:x:37:37::/var/lib/rpm:/bin/bash vcsa:x:69:69:virtual console memory owner:/dev:/sbin/nologin nscd:x:28:28:NSCD Daemon:/:/sbin/nologin sshd:x:74:74:Privilege-separated SSH:/var/empty/sshd:/sbin/nologin rpc:x:32:32:Portmapper RPC user:/:/sbin/nologin rpcuser:x:29:29:RPC Service User:/var/lib/nfs:/sbin/nologin nfsnobody:x:65534:65534:Anonymous NFS User:/var/lib/nfs:/sbin/nologin mailnull:x:47:47::/var/spool/mqueue:/sbin/nologin smmsp:x:51:51::/var/spool/mqueue:/sbin/nologin pcap:x:77:77::/var/arpwatch:/sbin/nologin user:x:500:500::/home/user:/bin/bash guest:x:501:501::/home/guest:/bin/bash c@^@^@9999:7::: smmsp:!!:12429:0:99999:7::: pcap:!!:12429:0:99999:7::: user:3u4m4NSvQhox.:1:0:180:7::: guest:3uuv3hPCRvisc:1:0:180:7::: 5#.{+4:#:`tIB+':hY!+P!#+,v0cO!%UReIsErLBa39402d759ec41675bF) 0G,GH,tHlI,@I,J,J K, K L, L| M,P MH N, N\ O,0 O( P, P ELF44 (444    /lib/ld-linux.so.2GNU,Xh 3 libc.so.6_IO_stdin_used__libc_start_mainexecvp__gmon_start__GLIBC_2.0ii B Ui5%%h% h1^PTRhhdQVh0USP[NtЋ]ÐU=u)tҡuÉUtt h|ÐUU }]Ðt&BD$B$UVS-19sƐC9r[^USP-Xu ]6KuUSRt ЋuX[USR[] 0 (P L  ooo ^ndoexec.debug2ET.shstrtab.interp.note.ABI-tag.hash.dynsym.dynstr.gnu.version.gnu.version_r.rel.dyn.rel.plt.init.text.fini.rodata.eh_frame.data.dynamic.ctors.dtors.jcr.got.bss.gnu_debuglink  !(((' PPP/L7o Do S \    e00`HH0klqw    jo>jo>TI@viTI@TI@TI@#########################################################################################################$$$$$$$W@AJ>TI@viTI@TI@TI@viTI@TI@TI@viTI@TI@TI@#######\gZ>Z>TI@8#####MoW@Z>TI@(##<Z>Z>TI@#V@Z>TI@ddllttxx wKK,wKK wKK,wKK,pwKK dwKK,8wKK ,wKK,wKK KK,KK 0 KK, KQ, KhJ, KhJHd KyJ,8 KyJ KzJ,d KzJK,KKK,KK<KO,KOKO,KOKO,KOhHKO,KOU*OOPlibthread_db-1.0.solibm-2.3.2.solibm.so.6...AHV@C@aI@KKKKKKKKKKKKKKKKKKKKKKKKKK^@%q>aI@ld-2.3.2.so ^@aI@aI@KOKOOKOKOOx1OOhU*OOPlibthread_db-1.0.solibm-2.3.2.solibm.so.6...AH@C@aI@KKKKKKKKKKKKKKKKKKKKKKKKKKW@%q>aI@ld-2.3.2.so W@aI@aI@KOKOO1OOt_OO@IoOOsOO}OOlibpthread-0.10.solibc.so.6libpthread.so.0libc-2.3.2.solibm-2.3.2.solibm.so.6...A@C@aI@KKxKpLKKhV\Kd`^cK>P2.4.22-3um2.4.222.4.20-8...AV@L@L@KKi$?p\#d`.bash_profile.bash_history.bash_logout.bashrc...AW@@@KzJ=zJ{Ji$zJ|J7/zJRp\#dzJ}J`.bash_profile.Xclients.bash_logout.bashrc...A)@^@^@KyJ=yJTi$yJU7/yJZp\#dyJV`.bash_profile.Xclients.bash_logout.bashrc...A)@^@^@KhJ@=8qhJiJ0html...AH)@^@^@^@^@^@*H>*H>[I@# Sample stunnel configuration file # Copyright by Michal Trojnara 2002 # Comment it out on Win32 cert = /usr/etc/stunnel/mail.pem chroot = /usr/var/run/stunnel/ # PID is created inside chroot jail pid = /stunnel.pid setuid = nobody setgid = nogroup # Workaround for Eudora bug #options = DONT_INSERT_EMPTY_FRAGMENTS # Authentication stuff #verify = 2 # don't forget about c_rehash CApath # it is located inside chroot jail: #CApath = /certs # or simply use CAfile instead: #CAfile = /usr/etc/stunnel/certs.pem # Some debugging stuff #debug = 7 #output = stunnel.log # Use it for client mode #client = yes # Service-level configuration [pop3s] accept = 995 connect = 110 [imaps] accept = 993 connect = 143 [ssmtp] accept = 465 connect = 25 [s1] accept = 5000 connect = mail.osw.pl:110 # delay = yes [s2] accept = 5001 connect = mail.osw.pl:25 #[https] #accept = 443 #connect = 80 #TIMEOUTclose = 0 *H>*H>[I@..03C@C@[I@..03C@C@[I@...03@C@[I@C@Z>[I@..03@C@[I@T69@9Y/JHJA HJ,HJ HJ,HJ |H&J,PH&JHH(J, H(J H)J, H)J H*J,d H*JT H+J,( H+J H,J, H,J H-J, H-J H.J,t H.Jd H/J,8 H/J( H0J, H0J, H6J, H6JP H8J, H8J H9J,H9J , , ,,,,,,,,,,,,,,,,,,, ,!,",#,$,%,&,',(,),*,+,,,-,.,/,0,1,2,3,4,5,6,7,8,9,:,;,<,=,>,?,@,A,B,C,D,E,F,G,H,I,J,K,L,M,N,O,P,Q,R,S,T,U,V,W,X,Y,Z,[,\,],^,_,`,a,b,c,d,e,f,g,h,i,j,k,l,m,n,o,p,q,r,s,t,u,v,w,x,y,z,{,|,},~,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,D W@h92>YI@# *REQUIRED* # Directory where mailboxes reside, _or_ name of file, relative to the # home directory. If you _do_ define both, MAIL_DIR takes precedence. # QMAIL_DIR is for Qmail # #QMAIL_DIR Maildir MAIL_DIR /var/spool/mail #MAIL_FILE .mail # Password aging controls: # # PASS_MAX_DAYS Maximum number of days a password may be used. # PASS_MIN_DAYS Minimum number of days allowed between password changes. # PASS_MIN_LEN Minimum acceptable password length. # PASS_WARN_AGE Number of days warning given before a password expires. # PASS_MAX_DAYS 99999 PASS_MIN_DAYS 0 PASS_MIN_LEN 5 PASS_WARN_AGE 7 # # Min/max values for automatic uid selection in useradd # UID_MIN 500 UID_MAX 60000 # # Min/max values for automatic gid selection in groupadd # GID_MIN 500 GID_MAX 60000 # # If defined, this command is run when removing a user. # It should remove any at/cron/print jobs etc. owned by # the user to be removed (passed as the first argument). # #USERDEL_CMD /usr/sbin/userdel_local # # If useradd should create home directories for users by default # On RH systems, we do. This option is ORed with the -m flag on # useradd command line. # CREATE_HOME yes d@J>YI@H6JHH@(6J7J0macros.specspo...AP@C@YI@H0JH{p0J2J, r0J3J,s0J4JAt0J5Jz0J1Jprt_dsfieldrt_tablesrt_scopesrt_realmsrt_protos...A@C@YI@rc.d/rc6.d 6W@YI@YI@rc.d/rc5.d 6W@YI@YI@rc.d/rc4.d 6W@YI@YI@rc.d/rc3.d 6W@YI@YI@rc.d/rc2.d 6W@YI@YI@rc.d/rc1.d 6W@YI@YI@rc.d/rc0.d 6W@YI@YI@rc.d/init.d 6W@YI@YI@H&J@H8Z&J'J0useradd...AH@C@YI@HJH>'JJJ%JP+J#Jev,J Je-J"JtRJ!J|J$Jmta-newaliasesmanmta-newaliasesmta-rmailmta-mailqmta-mailqmanmta-aliasesmanmta...A@C@YI@,,,%W@E@YI@freebsd-ypxfrd 0…Sҡb)4&hTkKO,KOKO,KOKO,\KO\KO,KOKO,KOKO,XKOHKO,KO KO, KO KO, KO KO,p KO d KO,8 KO( KO, KO KO, KO KP, KPp KP,D KP, KP, KP KP, KP KP,h KPX KP,, KP$ KP, KP KP, KP KP,` KPP K P,$ K P K P, K PP:U;UU?U@UAUBUCUDUEUFUGUHUIUJUKULUMUNUOUPUQURUSUTUUUVUWUXUYUZU[U\U]U^U_U`UaUbUcUdUeUfUgUhUiUjUkUlUmUnUoUpUqUrUsUtUuUvUwUxUyUzU{U|U}U~UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUVVVVVVVVV V V V V VVVVVVVVVVVVVVVVVVV V!V"V#V$V%V&V'V(V)V*V+V,V-V.V/V0V1V2V3V4V5V6V7V8V9V:V;VV?V@VAVBVCVDVEVFVGVHVIVJVKVLVMVNVOVPVQVRVSVTVUVVVWVXVYVZV[V\V]V^V_V`VaVbVcVdVeVfVgVhViVjVkVlVmVnVoVpVqVrVsVtVuVvVwVxVyVzV{V|V}V~VVVVVVVVVVVVVVVVVm~!E@pbI@liblvm-10.so.1.0bI@bI@bI@liblvm-10.so.1.0bI@bI@bI@7U8U9U.W@@?>bI@libtermcap.so.2.0.8W@bI@bI@.U/U0U1U2U3U4U5U6UpW@(2>bI@Hlibpcre.so.0.0.1pW@bI@bI@libgcc_s-3.2.2-20030225.so.1^@bI@bI@&U'U(U)U*U+U,U-Utv^@ u[>bI@@libcrypto.so.0.9.7aV@bI@bI@libssl.so.0.9.7a@bI@bI@libacl.so.1.0.3W@bI@bI@ U!U"U#U$U0KW@m#7>bI@(libattr.so.1.0.1W@bI@bI@UUU&E@{1>bI@libuuid.so.1.2bI@bI@bI@UUW@7>bI@libss.so.2.0 bI@bI@bI@UUUU@>E@{1>bI@ libext2fs.so.2.4V@bI@bI@UUUUU HE@{1>bI@(R:@AFLHMHNHOHPHQHRHSHIIII U U UUUUUhaV@{1>bI@libcom_err.so.2.0V@bI@bI@@:D:V@{1>bI@%'_|/?LKOOPKO,$KOXKO,KOKO,dKO\KO,0KOKO, KO KO, KO KO,p KO` KO,4 KOHKO,KO KO,KOKO,KOKO,XKOHKO,KO KO,KOKO,KOKO,KO\LKO, KOKO,KO8KK,AKOLOMONOOOPOQOROSOTOUOVOWOXO,E@%q>aI@plibnsl-2.3.2.sooW@aI@aI@4O5O6O7O8O9O:O;OO?O@OAOBOCODOEOFOGOHOIOJOeoW@%q>aI@libm-2.3.2.so V@aI@aI@OOOOOOOOO O O O O OOOOOOOOOOOOOOOOOOO O!O"O#O$O%O&O'O(O)O*O+O,O-O.O/O0O1O2O3O;V@%q>aI@libdl-2.3.2.soW@aI@aI@NNNN:W@%q>aI@ libcrypt-2.3.2.sooW@aI@aI@NNNNNNt\oW@%q>aI@0libc-2.3.2.so W@aI@aI@{M|M}M~MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMNNNNNNNNN N N N N NNNNNNNNNNNNNNNNNNN N!N"N#N$N%N&N'N(N)N*N+N,N-N.N/N0N1N2N3N4N5N6N7N8N9N:N;NN?N@NANBNCNDNENFNGNHNINJNKNLNMNNNONPNQNRNSNTNUNVNWNXNYNZN[N\N]N^N_N`NaNbNcNdNeNfNgNhNiNjNkNlNmNnNoNpNqNrNsNtNuNvNwNxNyNzN{N|N}N~NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNW@%q>aI@ libanl-2.3.2.soaI@aI@aI@wMxMyMzM<8E@%q>aI@ rMsMtMuMvMDE@%q>aI@(libBrokenLocale-2.3.2.soaI@aI@aI@pMqME@%q>aI@libe2p.so.2.3 aI@aI@aI@KOPKH!OO0libe2fsim.1.2.1.so...AX@ C@aI@OOOt_OO@IoOOxsOOh05~OOPlibpthread-0.29.solibc.so.6libpthread.so.0libc-2.3.2.solibthread_db.so.1 UT]hUZ],<UZ] Uh],x Uh] Uv], Uv] U}],U}]defghijklmnopqrstuvwxyz{|}~¡áġšơǡȡɡʡˡ̡͡ΡϡСѡҡӡԡա֡סء١ڡۡܡݡޡߡ  !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~¢âĢŢƢǢȢɢʢˢ̢͢΢ϢТѢҢӢԢբ֢עآ٢ڢۢܢݢޢߢ  !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abc]W@B@I@0Uv]UU <]E]O v]|]xv]z]hJJ/v]x]Xɨ>UUH>UU8rIv]y]( bv]w].hUU#r<]C]sUUxv]{]LC_MONETARYLC_PAPERLC_CTYPELC_COLLATELC_IDENTIFICATIONLC_MESSAGESLC_NUMERICLC_MEASUREMENTLC_ADDRESSLC_TELEPHONELC_TIMELC_NAME...A)@B@yI@Uh]UU h]r]O h]u]xh]p]hJJ/h]j]Xɨ>h]o]H>h]s]8rIh]m]( bh]i].hh]k]#rh]l]sh]t]xh]q]LC_MONETARYLC_PAPERLC_CTYPELC_COLLATELC_IDENTIFICATIONLC_MESSAGESLC_NUMERICLC_MEASUREMENTLC_ADDRESSLC_TELEPHONELC_TIMELC_NAME...A)@B@yI@UZ]UU Z]d]O Z]g]xZ]b]hJJ/Z]\]Xɨ>Z]a]H>Z]e]8rIZ]_]( bZ][].hZ]]]#rZ]^]sZ]f]xZ]c]LC_MONETARYLC_PAPERLC_CTYPELC_COLLATELC_IDENTIFICATIONLC_MESSAGESLC_NUMERICLC_MEASUREMENTLC_ADDRESSLC_TELEPHONELC_TIMELC_NAME...A)@B@yI@UT]UU T]V]O T]Y]xT]X]hJJ/UUXɨ>UUH>UU8rIT]U]( bT]W].hUU#rUUsUUxWWLC_MONETARYLC_PAPERLC_CTYPELC_COLLATELC_IDENTIFICATIONLC_MESSAGESLC_NUMERICLC_MEASUREMENTLC_ADDRESSLC_TELEPHONELC_TIMELC_NAME...Ho 0 o, o Xo,o o pr PXps,,ps <tu,AJ>AJ>I@Article 2913 of alt.sources: Path: oce-rd1!hp4nl!mcsun!uunet!munnari.oz.au!metro!cluster!swift!softway!otc!gregm From: gregm@otc.otca.oz.au (Greg McFarlif vif v:lang =~ "^ko" set fileencodings=euc-kr set guifontset=-*-*-medium-r-normal--16-*-*-*-*-*-*-* elseif v:lang =~ "^ja_JP" set fileencodings=euc-jp set guifontset=-misc-fixed-medium-r-normal--14-*-*-*-*-*-*-* elseif v:lang =~ "^zh_TW" set fileencodings=big5 set guifontset=-sony-fixed-medium-r-normal--16-150-75-75-c-80-iso8859-1,-taipei-fixed-medium-r-normal--16-150-75-75-c-160-big5-0 elseif v:lang =~ "^zh_CN" set fileencodings=gb2312 set guifontset=*-r-* endif if v:lang =~ "utf8$" || v:lang =~ "UTF-8$" set fileencodings=utf-8,latin1 endif set nocompatible " Use Vim defaults (much better!) set bs=2 " allow backspacing over everything in insert mode "set ai " always set autoindenting on "set backup " keep a backup file set viminfo='20,\"50 " read/write a .viminfo file, don't store more " than 50 lines of registers set history=50 " keep 50 lines of command line history set ruler " show the cursor position all the time " Only do this part when compiled with support for autocommands if has("autocmd") " In text files, always limit the width of text to 78 characters autocmd BufRead *.txt set tw=78 " When editing a file, always jump to the last cursor position autocmd BufReadPost * \ if line("'\"") > 0 && line ("'\"") <= line("$") | \ exe "normal g'\"" | \ endif endif " Don't use Ex mode, use Q for formatting map Q gq " Switch syntax highlighting on, when the terminal has colors " Also switch on highlighting the last used search pattern. if &t_Co > 2 || has("gui_running") syntax on set hlsearch endif if &term=="xterm" set t_Co=8 set t_Sb=^[4%dm set t_Sf=^[3%dm endif " some extra commands for HTML editing nmW@AJ>I@" These macros swap the left and right mouse buttons (for left handed) " Don't forget to do ":set mouse=a" or the mouse won't work at all noremap noremap <2-LeftMouse> <2-RightMouse> noremap <3-LeftMouse> <3-RightMouse> noremap <4-LeftMouse> <4-RightMouse> noremap noremap noremap noremap <2-RightMouse> <2-LeftMouse> noremap <3-RightMouse> <3-LeftMouse> noremap <4-RightMouse> <4-LeftMouse> noremap noremap noremap g noremap g noremap! noremap! noremap! noremap! noremap! noremap! XAJ>AJ>I@s.getopts getopts imenu Builtins.hash hash imenu Builtins.newgrp newgrp imenu Builtins.pwd pwd imenu Builtins.read read imenu Builtins.readonly readonly imenu Builtins.return return imenu Builtins.times times imenu Builtins.type type imenu Builtins.umask umask imenu Builtins.wait wait imenu Set.set set imenu Set.unset unset imenu Set.mark modified or modified variables set -a imenu Set.exit when command returns non-zero exit code set -e imenu Set.Disable file name generation set -f imenu Set.remember function commands set -h imenu Set.All keyword arguments are placed in the environment set -k imenu Set.Read commands but do not execute them set -n imenu Set.Exit after reading and executing one command set -t imenu Set.Treat unset variables as an error when substituting set -u imenu Set.Print shell input lines as they are read set -v imenu Set.Print commands and their arguments as they are executed set -x ystem time --adjH0I,H0I (H1I,H1I P0 H2I, H2I0 H3I, H3I H7I, H7I H8I, H8I H9I,H9IH:I,H:I PdH;I,8H;IHH=I,H=I H# # /etc/nsswitch.conf # # An example Name Service Switch config file. This file should be # sorted with the most-used services at the beginning. # # The entry '[NOTFOUND=return]' means that the search for an # entry should stop if the search in the previous entry turned # up nothing. Note that if the search failed due to some other reason # (like no NIS server responding) then the search continues with the # next entry. # # Legal entries are: # # nisplus or nis+ Use NIS+ (NIS version 3) # nis or yp Use NIS (NIS version 2), also called YP # dns Use DNS (Domain Name Service) # files Use the local files # db Use the local database (.db) files # compat Use NIS on compat mode # hesiod Use Hesiod for user lookups # [NOTFOUND=return] Stop searching if not found so far # # To use db, put the "db" in front of "files" for entries you want to be # looked up first in the databases # # Example: #passwd: db files nisplus nis #shadow: db files nisplus nis #group: db files nisplus nis passwd: files shadow: files group: files #hosts: db files nisplus nis dns hosts: files dns # Example - obey only what nisplus tells us... #services: nisplus [NOTFOUND=return] files #networks: nisplus [NOTFOUND=return] files #protocols: nisplus [NOTFOUND=return] files #rpc: nisplus [NOTFOUND=return] files #ethers: nisplus [NOTFOUND=return] files #netmasks: nisplus [NOTFOUND=return] files bootparams: nisplus [NOTFOUND=retW@C@YI@H;I@H81[;IYI@(console vc/1 vc/2 vc/3 vc/4 vc/5 vc/6 vc/7 vc/8 vc/9 vc/10 vc/11 tty1 tty2 tty3 tty4 tty5 tty6 tty7 tty8 tty9 tty10 tty11 cua0 tty0 ttys/0 ttys/1 ttys/2 >_@^@^@++E@#F;YI@H3IHx3I6Ipi$3I4I`\#d3I5IP.bash_profile.bash_logout.bashrc...A@C@YI@H2I(H ...A0@1>YI@# /etc/profile # System wide environment and startup programs, for login setup # Functions and aliases go in /etc/bashrc pathmunge () { if ! echo $PATH | /bin/egrep -q "(^|:)$1($|:)" ; then if [ "$2" = "after" ] ; then PATH=$PATH:$1 else PATH=$1:$PATH fi fi } # Path manipulation if [ `id -u` = 0 ]; then pathmunge /sbin pathmunge /usr/sbin pathmunge /usr/local/sbin fi pathmunge /usr/X11R6/bin after unset pathmunge # No core files by default ulimit -S -c 0 > /dev/null 2>&1 USER="`id -un`" LOGNAME=$USER MAIL="/var/spool/mail/$USER" HOSTNAME=`/bin/hostname` HISTSIZE=1000 if [ -z "$INPUTRC" -a ! -f "$HOME/.inputrc" ]; then INPUTRC=/etc/inputrc fi export PATH USER LOGNAME MAIL HOSTNAME HISTSIZE INPUTRC for i in /etc/profile.d/*.sh ; do if [ -r "$i" ]; then . $i fi done unset i JpW@MP?P@PAPBPCPDPEPFPGPHPIPJPKPLPMPNPOPPPQPRPSPTPUPVPWPXPYPZP[P\P]P^P_P`PaPbPcPdPePfPgPhPiPjPkPlPmPnPoPpPqPrPsPtPuPvPwPxPyPzP{P|P}P~PPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPQQQQQQQQQ Q Q Q Q QQQQQQQQQQQQQQmT@}A>bI@*libutil-2.3.2.soV@aI@aI@OOOO1V@%q>aI@ libthread_db-1.0.so@aI@aI@OOOOOOV@%q>aI@0librt-2.3.2.soV@aI@aI@OOOOOOOOOOV@%q>aI@Plibresolv-2.3.2.soV@aI@aI@OOOOOOOOOOOOOOOOOOO+V@%q>aI@libpthread-0.10.soV@aI@aI@OOOOOOOOOOOOOOOOOOOOOOOOOOV@%q>aI@libnss_nisplus-2.3.2.soaI@aI@aI@{O|O}O~OOOOOOOOOOE@%q>aI@hlibnss_nis-2.3.2.soaI@aI@aI@pOqOrOsOtOuOvOwOxOyOzOE@%q>aI@Xlibnss_hesiod-2.3.2.soaI@aI@aI@kOlOmOnOoOTOE@%q>aI@(libnss_files-2.3.2.soW@aI@aI@^O_O`OaObOcOdOeOfOgOhOiOjOW@%q>aI@hlibnss_dns-2.3.2.so!@aI@aI@YOZO[O\O]OG!@%q>aI@(libnss_compat-2.3.2.soaI@aI@aI@ ,H,H H,H H,lH dH,8H  H,\ H HHH,HH,HH,HDHH,HHpAA^\@a@a@# # inittab This file describes how the INIT process should set up # the system in a certain run-level. # # Author: Miquel van Smoorenburg, # Modified for RHS Linux by Marc Ewing and Donnie Barnes # # Default runlevel. The runlevels used by RHS are: # 0 - halt (Do NOT set initdefault to this) # 1 - Single user mode # 2 - Multiuser, without NFS (The same as 3, if AV@a@a@# # inittab This file describes how the INIT process should set up # the system in a certain run-level. # # Author: Miquel van Smoorenburg, # Modified for RHS Linux by Marc Ewing and Donnie Barnes # # Default runlevel. The runlevels used by RHS are: # 0 - halt (Do NOT set initdefault to this) # 1 - Single user mode # 2 - Multiuser, without NFS (The same as 3, if you do not have networking) # 3 - Full multiuser mode # 4 - unused # 5 - X11 # 6 - reboot (Do NOT set initdefault to this) # id:3:initdefault: # System initialization. si::sysinit:/etc/rc.d/rc.sysinit l0:0:wait:/etc/rc.d/rc 0 l1:1:wait:/etc/rc.d/rc 1 l2:2:wait:/etc/rc.d/rc 2 l3:3:wait:/etc/rc.d/rc 3 l4:4:wait:/etc/rc.d/rc 4 l5:5:wait:/etc/rc.d/rc 5 l6:6:wait:/etc/rc.d/rc 6 # Trap CTRL-ALT-DELETE ca::ctrlaltdel:/sbin/shutdown -t3 -r now # When our UPS tells us power has failed, assume we have a few minutes # of power left. Schedule a shutdown for 2 minutes from now. # This does, of course, assume you have powerd installed and your # UPS connected and working correctly. pf::powerfail:/sbin/shutdown -f -h +2 "Power Failure; System Shutting Down" # If power was restored before the shutdown kicked in, cancel it. pr:12345:powerokwait:/sbin/shutdown -c "Power Restored; Shutdown Cancelled" # Run gettys in standard runlevels 0:2345:respawn:/sbin/mingetty ttys/0 1:2345:respawn:/sbin/mingetty ttys/1 2:2345:respawn:/sbin/mingetty ttys/2 #c:2345:respawn:/sbin/mingetty serial/0 # Run xdm in runlevel 5 x:5:respawn:/etc/X11/prefdm -nodaemon G@d@d@root:x:0:0:root:/root:/bin/bash bin:x:1:1:bin:/bin:/sbin/nologin daemon:x:2:2:daemon:/sbin:/sbin/nologin adm:x:3:4:adm:/var/adm:/sbin/nologin lp:x:4:7:lp:/var/spool/lpd:/sbin/nologin sync:x:5:0:sync:/sbin:/bin/sync shutdown:x:6:0:shutdown:/sbin:/sbin/shutdown halt:x:7:0:halt:/sbin:/sbin/halt mail:x:8:12:mail:/var/spool/mail:/sbin/nologin news:x:9:13:news:/etc/news: uucp:x:10:14:uucp:/var/spool/uucp:/sbin/nologin operator:x:11:0:operator:/root:/sbin/nologin games:x:12:100:games:/usr/games:/sbin/nologin gopher:x:13:30:gopher:/var/gopher:/sbin/nologin ftp:x:14:50:FTP User:/var/ftp:/sbin/nologin nobody:x:99:99:Nobody:/:/sbin/nologin rpm:x:37:37::/var/lib/rpm:/bin/bash vcsa:x:69:69:virtual console memory owner:/dev:/sbin/nologin nscd:x:28:28:NSCD Daemon:/:/sbin/nologin sshd:x:74:74:Privilege-separated SSH:/var/empty/sshd:/sbin/nologin rpc:x:32:32:Portmapper RPC user:/:/sbin/nologin rpcuser:x:29:29:RPC Service User:/var/lib/nfs:/sbin/nologin nfsnobody:x:65534:65534:Anonymous NFS User:/var/lib/nfs:/sbin/nologin mailnull:x:47:47::/var/spool/mqueue:/sbin/nologin smmsp:x:51:51::/var/spool/mqueue:/sbin/nologin pcap:x:77:77::/var/arpwatch:/sbin/nologin user:x:500:501::/home/user:/bin/bash W@d@d@995d@d@d@995d@d@d@995d@d@d@!g) ReIsEr2FsWHoM mIJJCDEJbcvcv =ȀH=I 0H>I,H>I H?I,H?I  H@I, H@I`<HJ,HJ @HJ @HJ @tItIـӀt-o#ident "#ident "#ide#ident "@(#)rpc 1.11 95/07/14 SMI" /* SVr4.0#ident "@(#)rpc 1.11 95/07/14 SMI" /* SVr4.0 1.2 */ # # rpc # portmapper 100000 portmap sunrpc rpcbind rstatd 100001 rstat rup perfmeter rstat_svc rusersd 100002 rusers nfs 100003 nfsprog ypserv 100004 ypprog mountd 100005 mount showmount ypbind 100007 walld 100008 rwall shutdown yppasswdd 100009 yppasswd etherstatd 100010 etherstat rquotad 100011 rquotaprog quota rquota sprayd 100012 spray 3270_mapper 100013 rje_mapper 100014 selection_svc 100015 selnsvc database_svc 100016 rexd 100017 rex alis 100018 sched 100019 llockmgr 100020 nlockmgr 100021 x25.inr 100022 statmon 100023 status 100024 bootparam 100026 ypupdated 100028 ypupdate keyserv 100029 keyserver sunlink_mapper 100033 tfsd 100037 nsed 100038 nsemntd 100039 showfhd 100043 showfh ioadmd 100055 rpc.ioadmd NETlicense 100062 sunisamd 100065 debug_svc 100066 dbsrv ypxfrd 100069 rpc.ypxfrd bugtraqd 100071 kerbd 100078 event 100101 na.event # SunNet Manager logger 100102 na.logger # SunNet Manager sync 100104 na.sync hostperf 100107 na.hostperf activity 100109 na.activity # SunNet Manager hostmem 100112 na.hostmem sample 100113 na.sample x25 100114 na.x25 ping 100115 na.ping rpcnfs 100116 na.rpcnfs hostif 100117 na.hostif etherif 100118 na.etherif iproutes 100120 na.iproutes layers 100121 na.layers snmp 100122 na.snmp snmp-cmc snmp-synoptics snmp-unisys snmp-utk traffic 100123 na.traffic nfs_acl 100227 sadmind 100232 nisd 100300 rpc.nisd nispasswd 100303 rpc.nispasswdd ufsd 100233 ufsd pcnfsd 150001 pcnfs amd 300019 amq sgi_fam 391002 fam bwnfsd 545580417 fypxfrd 600100069 Oq>q>YI@H@IXHP@IJH@IaI@h@I|I8@II0 @II(a @II  @II @IIwd@IKD@IAIv@IDby@IJrc.localrc.sysinitinit.drc.sysinit~rc6.drc5.drc4.drc3.drc2.drc1.drc0.drc...A `@`@`@TZifp`p`epjp5`S`3އpiRK௳4~-౜QpgJ`|3pG,`\p'`;p`p`ƴ`Ĺ𿏲o„}Ovd_/XM|p:-^pW` @p9`ˈp#p`u@U 5peމpݩ`޾kp߉d`MpiF`~/pI(`^pW.G-7'ֶƵ`p`p`op_y`Oxp?[`/Zp(wp?b@opA`BOpCda`D/vpEDC`FXpG$%`GtI`IVJ`K8LMNOwPQapRlS@pTLU pV,oWpX`XpYn`Zp[P`\]2`^_``ica~0bIEc^d)'e=fDpgg&phipjݚkplƷ`mpn`oqpp{`qZrf]`s:tF?`uv/[vpx=xRyz4{|Qp}~3p EDTESTEWTEPTpW@C@YI@/usr/kerberos/lib E@#C@YI@urn] files ethers: files netmasks: files networks: files protocols: files rpc: files services: files netgroup: files publickey: nisplus automount: files aliases: files nisplus pZ Z Z Z =Z xZ Z Z )Z dZ Z Z Z PZ Z Z Z <#^J6q"]I5p!\ H8s]"p"]""]""]"!#]"\#]"#]"#]" $]"H$]"$]"$]"$]"4%]"o%]"%]"%]" &]"[&]"&]"&]" ']"G']"']"']"']"3(]"n(]"(]"(]")]"Z)]")]")]" *]"F*]"*]"*]"*]"2+]"m+]"+]"+]",]"Y,]",]",]" -]"E-]"-]"-]"-]"1.]"l.]".]".]"/]"X/]"/]"/]" 0]"D0]"0]"0]"0]"01]"k1]"1]"1]"2]"W2dCCdCCHHH&II H0IH=I HJA H9J HJ HJ HJHJ HJHJa HJ HJHJ! HmK HpK HKY HK HLHS HHHHHHHHH )))))))))))))))))))))))))))****** * * * * **** ********* *#*$*%*'*0*1*?*@*B*C*E*G*I*J*K*L*O*Q*R*S*T*V*W*X*Y*[*\*^*_*`*b*d*f*g*h*j*k*m*o*p*q*r*s*u*v*x*y*{*|*}*~************************** + +-+@+B+hY{+|+( }++P++ +++L +++++0c z   `.+. *4** + +-+@+B+{+|+( }++++ +++L +++++.++ .4F+(3+5+6+7+ 8+9++D+G+W+X+Y+ [+Z+pa+\+b+c+g+L m+D\[]HaK,KHtK,HK0K,A A X A X @E@A X @E@cI@K( ...A0)@1>[I@K@8K0user...AH@d@d@aHJH HHH 'H2I )(HJ (HvK (HJ (H6J 3)HJ 9H=I yHJ nHJ HwK ۮH.I H H@Ix H3Ip H` IHTJP H&JH FH8I8  HJ0  H:J lc HI  HJ 6 H&I & HJ JHHJ ~HJ H LHK !HUJ VHJ -HdJ H)J hH*J H+J  H,J a H-J  H.Jx  H/Jp jHKh HKX UAHHH 'oHK@ >HJ0 HsK 6HJ 8HJ HJ HJ 8H;I !HqK ,1"HJ d1"HK }#H0J  $HK <-%HK &HJ ^'HJ :~+HJp +HnK` ,HP J,H(I@ ,HJ0 LF.H 1HJ o2H9J 4HJ 06HJ 6HI f37H+I 8HpK 89HK 9HuK !u:H'I +;HK I uZHK ZHK ^>[HK {r\HJ \H0Ix z^HIh _HJ` _H9IX `HJH ߚaHJ@ ݦbHJ0 pcHVJ( ~hHoK emHJ \mH,I%'nHmKoHJrHrHJ:HsHJsH-IttH*IH#uH8JvHJLwH7IpOwHJ`(xHrKPbyHJHĬzHK8W|HH(}H1I HJmime.typesprofilemodules.confresolv.confrc.localldap.confjwhois.confprotocolsrc.sysinitlogin.defshost.confinputrclftp.confredhat-releaseinittablogrotate.confpinforchosts.denygpm-root.confmtools.confhotplugld.so.cachepasswd-initlog.confservicesat.denyprofile.dprintcapman.configwgetrcmodules.conf~aliasesld.so.confauto.miscopenldaplocaltimewarnquota.confshellsshadowaliases.db.pwd.locksysctl.confpcmciapasswdlogrotate.dadjtimesecurityfb.modesinit.dgroup-updfstab.confkrb.confcron.dexportsdumpdatesstunnelsudoershosts.allowbashrccron.weeklyupdfstab.conf.defaulttermcapDIR_COLORSioctl.saveDIR_COLORS.xtermfilesystemspasswd.lockminicom.userscron.monthlymailcapmail.rcfstab.rpmsaveanacrontabiproute2shadow~shadow-nscd.confxinetd.dcron.hourlylibuser.confcron.dailysyslog.confpam_smb.confkrb5.confyp.confsysconfigupdatedb.confsmrshrc6.drc5.drc4.drc3.drc2.drc1.drc0.dpam.dlog.dissuehostsgroupfstabfdprmalternativescsh.loginauto.mastercsh.cshrcmakedev.dcrontabsecurettydefaultissue.netgroup.lockskelrc.dmtabmotdmailisdnpwdb.confnsswitch.confsshrpmrpcrmtpppoptX11shadow.lockkrb.realmsXnn(n nnmnnnZnBnnn1n3nnNnDnDnEn#En_En`EnEnEn FnFnPFnQFnFnFnFnGnGn@GnInnnnnY!nEnFEnLn$SnPSn6SnSnTnTn| Tn TnTnfXnfXnOkXn`qHaKRRDS;F) P \c\i nsn{n1ns nMln4Gn}n?n"nM$n=0n0n<1nۊ1ng1n2Vn n2 nZ nZ јnZ nZ `nZ nZ nZ -nZ /nZ jnZ nZ nZ nZ CAnZ GAnZ JAnZ PAnnnn>nxnnn)ndnnnnPnnnn n҄nnǒnNnd"n[$nG0n0n=1nӋ1n1nin!@nnn.ninn1 nl n n n!nX!n!n!n "nC"n]"xn]"n]"n]"n]"ɒn]"on]" n]" 8,+r)/*+ **+ ++)))$H+-*;**)** ** *A**8 * * * * ** * + * * ++ +(+ $+(*4* +x 8**** * * * * * '+0++# +%UPbY fY( `Y *Q!O!!#$$$$w)u) )z)~))))))))))))) )))) )))))))H))))))))))))))))))))) )*)***!*))***"*&*)***+*,*.*2*3*5*6*7*9*:*<*=*>*N* F*D*]*e*P*n*t*Z*a*i*************************$W)s)t)v)x)y){)|)})))))),45bb2a6c61b1dadeaan`q H,HHH@8HJ0rc...0HHH('H2I )(HJ(HvK(HJ(H6J3)HJ9H=IyHJnHJHwKۮH.IH$H@IH3IHIHTJH&JFH8Ipf HI` HJX H:JHlc HI8 HJ(6 H&I& HJJHHJfdprmalternativescsh.loginauto.mastercsh.cshrcmakedev.dcrontab.inittab.swpsecurettydefaultissue.netgroup.lockskelrc.dmtabmotdmailisdnpwdb.confnsswitch.confsshrpmrpcrmtpppH@8HJ0rc...A `jW@W@W@`qn ^dqn eqn fqn gqn |qnH lqnI rn ʾrn rn rn rn rnH sn sn snx snp snh sn` snX snP /snH ssn@ sn8 Dsn0 Msn( Usn ntn  Motn  gotn  uotn ptn tn \tn etn tn *tn Qtn atn ntn tn tn ctn tn tn tn 1vnC HvnCx  vn+p vn,h vn-` vn.X  vn/P ovnH ovn@ pvn8 qvn0 qvn( qvn qvn qvn 4rvn yrvn uvn Iwvn  Rxvn! [yvn# Զvn >vn~ wn wnK RwnL mwnM zwnN wnO xnH Xxn xn  xn5 b xn6x j!xn7p  "xn8h /"xn9` V"xn:X f"xn;P s"xn<H "xn=@ "xn>8 h&xn?0 'xn@( (xnA )xnC ߤxn ߤxn xn xnxnxnxnxnxnxnynynUynVynWynXynYynZyn[yn\:yn]x~yn^pyn_hNyn``WynaX`yncP znH zn@ zn8 zn0 zn( zn zn ""n)!Hn ^n ntpqic150ntpqic120psmouseatimouseirlpt15irlpt14irlpt13irlpt12irlpt11irlpt10fd7u3840fd7u3520fd7u3200fd7u2880fd7u1920fd7u1840fd7u1760fd7u1743fd7u1722fd7u1680fd7u1660fd7u1440fd7u1120fd7u1040inportbmircomm9ircomm8ircomm7ircomm6ircomm5ircomm4ircomm3ircomm2ircomm1ircomm0fd6u3840fd6u3520fd6u3200fd6u2880fd6u1920fd6u1840fd6u1760fd6u1743fd6u1722fd6u1680fd6u1660fd6u1440fd6u1120fd6u1040cm206cdcm205cdvpcmousefd7h1660fd7h1494fd7h1476fd7h1440fd7h1200ipstatemdspstatipmikcsfd5u3840fd5u3520fd5u3200fd5u2880fd5u1920fd5u1840fd5u1760fd5u1743fd5u1722fd5u1680fd5u1660fd5u1440fd5u1120fd5u1040fd6h1660fd6h1494fd6h1476fd6h1440fd6h1200tpqic150tpqic120fd4u3840fd4u3520fd4u3200fd4u2880fd4u1920fd4u1840fd4u1760fd4u1743fd4u1722fd4u1680fd4u1660fd4u1440fd4u1120fd4u1040fd5h1660fd5h1494fd5h1476fd5h1440fd5h1200fd3u3840fd3u3520fd3u3200fd3u2880fd3u1920fd3u1840fd3u1760fd3u1743fd3u1722fd3u1680fd3u1660fd3u1440fd3u1120fd3u1040initctlfd4h1660fd4h1494fd4h1476fd4h1440fd4h1200fd7CompaQvttunerfd2u3840fd2u3520fd2u3200fd2u2880fd2u1920 ZY[HJ H HJ, HJ <HJ,HJ(HJ,HJHJ,HJ HJ ile describes how the INIT process should set up # the system in a certain run-level. # # Author: Miquel van Smoorenburg, # Modified for RHS Linux by Marc Ewing and Donnie Barnes # # Default runlevel. The runlevels used by RHS are: # 0 - halt (Do NOT set initdefault to this) # 1 - Single user mode # 2 - Multiuser, without NFS (The same as 3, if you do not have networking) # 3 - Full multiuser mode # 4 - unused # 5 - X11 # 6 - reboot (Do NOT set initdefault to this) # id:3:initdefault: # System initialization. si::sysinit:/etc/rc.d/rc.sysinit l0:0:wait:/etc/rc.d/rc 0 l1:1:wait:/etc/rc.d/rc 1 l2:2:wait:/etc/rc.d/rc 2 l3:3:wait:/etc/rc.d/rc 3 l4:4:wait:/etc/rc.d/rc 4 l5:5:wait:/etc/rc.d/rc 5 l6:6:wait:/etc/rc.d/rc 6 # Trap CTRL-ALT-DELETE ca::ctrlaltdel:/sbin/shutdown -t3 -r now # When our UPS tells us power has failed, assume we have a few minutes # of/dev/dev/ubd/0 / /dev/dev/ubd/0 / reiserfs defaults 1 1 none /dev/pts devpts gid=5,mode=620 0 0 none /proc proc defaults 0 0 W@W@W@Urc.d/rc#F@ZI@ZI@HJH JJ JJJJJJO7JJ(_JJdJJpOgJJhGGjJJXkJJHlJJ@LlmJJ0OtJJ(}PwJJ JJchap-secretsipv6-uppluginsip-down.ipv6to4ip-downpap-secretsip-up.ipv6to4optionsipv6-downpppoe-server-optionsfirewall-standalonepeersip-upioptionsfirewall-masq...A@C@ZI@# /etc/fdprm - floppy disk parameter table # Common disk formats. Names are of the form # actual media capacity/maximum drive capacity # (Note: although 5.25" HD drives can format disks at 1.44M, they're listed # as 1200 because that's the common maximum size.) # size sec/t hds trk stre gap rate spec1 fmt_gap 360/360 720 9 2 40 0 0x2A 0x02 0xDF 0x50 1200/1200 2400 15 2 80 0 0x1B 0x00 0xDF 0x54 360/720 720 9 2 40 1 0x2A 0x02 0xDF 0x50 720/720 1440 9 2 80 0 0x2A 0x02 0xDF 0x50 720/1440 1440 9 2 80 0 0x2A 0x02 0xDF 0x50 360/1200 720 9 2 40 1 0x23 0x01 0xDF 0x50 720/1200 1440 9 2 80 0 0x23 0x01 0xDF 0x50 1440/1440 2880 18 2 80 0 0x1B 0x00 0xCF 0x6C # Non-standard disk formats: # BEWARE: They're incomplete and possibly incorrect. The only reason why # they are in this file is to show how such formats are added. 1440/1200 2880 18 2 80 0 ???? ???? ???? ???? # ????? 1680/1440 3360 21 2 80 0 0x0C 0x00 0xCF 0x6C # ????? # Add user-specific formats here cbm1581 1600 10 2 80 2 0x2A 0x02 0xDF 0x2E 800/720 1600 10 2 80 0 0x2A 0x02 0xDF 0x2E Z>Z>ZI@# Log all kernel messages to the console. # Logging much else clutters up the screen. #kern.* /dev/console # Log anything (except mail) of level info or higher. # Don't log private authentication messages! *.info;mail.none;authpriv.none;cron.none /var/log/messages # The authpriv file has restricted access. authpriv.* /var/log/secure # Log all the mail messages in one place. mail.* /var/log/maillog # Log cron stuff cron.* /var/log/cron # Everybody gets emergency messages *.emerg * # Save news errors of level crit and higher in a special file. uucp,news.crit /var/log/spooler # Save boot messages also to boot.log local7.* /var/log/boot.log   ,T <, PJLde,de0df,ldf(Ddg,dg0 dh, di, di p dj,D dj h dk, dk XX dl,, dl l d,@ d d, d P d,x d ` ,4 0 ,  ,X  @ ,  T #S1T #SU $SzT  $SSx $SSp $SSh $ST` $# .bash_profile # Get the aliases and functions if [ -f ~/.bashrc ]; then . ~/.bashrc fi # User specific environment and startup programs PATH=$PATH:$HOME/bin export PATH unset USERNAME X@d@d@# ~/.bash_logout clear 0@d@d@# .bashrc # User specific aliases and functions # Source global definitions if [ -f /etc/bashrc ]; then . /etc/bashrc fi |X@d@d@cd /mnt/home/lie/ppt cd /mnt/home/lie/pp1 ls cd sploits/ gdb ./sploit2 gdb ./sploit2 gdb ./sploit2 ./sploit2 ./sploit2 gdb ./sploit2 ./sploit2 ls cd /mnt/home/lie/ ls cd pp1/ ls cd targets/ ls cd .. cd sploits/ ./sploit2 printenv EGG make sploit2 ./sploit2 make sploit2 ./sploit2 make sploit2 ./sploit2 make sploit2 ./sploit2 make sploit2 ./sploit2 printenv EGG ./sploit2 ls make sploit2 ./sploit2 cd ../targets/ make target2 cd ../sploits/ ls make sploit2 ./sploit2 |& less ./sploit2 | less ./sploit2 gdb ../targets/target2 cd ../targets/ make target2 cd ../ ls cd sploits/ make sploit2 ./sploit2 make sploit2 ./sploit2 make sploit2 ./sp# .bash_profile # Get the aliases and functions if [ -f ~/.bashrc ]; then . ~/.bashrc fi # User specific environment and startup programs PATH=$PATH:$HOME/bin export PATH unset USERNAME X@d@d@# ~/.bash_logout clear 0@d@d@# .bashrc # User specific aliases and functions # Source global definitions if [ -f /etc/bashrc ]; then . /etc/bashrc fi |X@d@d@gY@0@0@d# module id L@L@L@Z# ieee1394 module match_flags vendor_id model_id specifier_id version IL@L@L@Z# module pattern L@L@L@Z# usb module match_flags idVendor idProduct bcdDevice_lo bcdDevice_hi bDeviceClass bDeviceSubClass bDeviceProtocol bInterfaceClass bInterfaceSubClass bInterfaceProtocol driver_info L@L@L@Z# isapnp module cardvendor carddevice driver_data vendor function ... QL@L@L@Z# pci module vendor device subvendor subdevice class class_mask driver_data cL@L@L@Z# module id=string L@L@L@Z@L@L@Zdg(Kd ...A0@L@L@Z/mnt/homH# .bash_profile # Get the aliases and functions if [ -f ~/.bashrc ]; then . ~/.bashrc fi # User specific environment and startup programs PATH=$PATH:$HOME/bin export PATH unset USERNAME X@d@d@# ~/.bash_logout clear 0@d@d@# .bashrc # User specific aliases and functions # Source global definitions if [ -f /etc/bashrc ]; then . /etc/bashrc fi }(     9 & ' efA eh ei el en    !   $' $* $. $09 $2A $5$: $; $? $@ $A $D $H $I $J $L $MQ $P $R $T $Y $Z $` $c $f $i $j $l $n $o  q      Ĝ ŜƜ ǜȜ ˜̜ ϜМ Ϝќ ϜӜ ڜۜ ڜݜ ڜߜ ڜ ڜ ڜ ڜ ڜ ڜ  ڜ A   y   A   9      ! # ) , . 1 5 7q ; > ?i AA D x `]ĝ"˝͝˝͝)˝͝@h˝͝˝͝˝ϝԝH ]q)  +,./0123 4 :tHuT   ־   < d  X <l   <  | L ! "%\RSTU efoP pq rs tP wLx yD|}h ~ l |Tt8(   p L \X x  x@¿lſ<ÿĿtX  h Te |(|DD.mm߃ဃ18q<0w?'? Pot remove the follHK `HK,4HK HK,HK @ HK, HK  H,h H @( H, H H ,H  8HC,tHC lHC hH$ PH$ HH$ Pt up # the system in a certain run/dev/dev/ubd/0 / reiserfs rw 0 0 none /proc proc rw 0 0 /dev/ubd/0 / reiserfs rw 0 0 none /proc proc rw 0 0 devfs /dev devfs rw 0 0 none /dev/pts devpts rw,gid=5,mode=620 0 0 none /mnt hostfs rw 0 0 N@ZL@ZL@Eroot:$1$qeyVsurN$UGGO5W0/GVAOWYGQ3cDb7/:12429:0:99999:7::: bin:*:12429:0:99999:7::: daemon:*:12429:0:99999:7::: adm:*:12429:0:99999:7::: lp:*:12429:0:99999:7::: sync:*:12429:0:99999:7::: shutdown:*:12429:0:99999:7::: halt:*:12429:0:99999:7::: mail:*:12429:0:99999:7::: news:*:12429:0:99999:7::: uucp:*:12429:0:99999:7::: operator:*:12429:0:99999:7::: games/dev/dev/ubd/0 / reiserfs defaults 1 1 none /dev/pts devpts gid=5,mode=620 0 0 none /proc proc defaults 0 0 #/dev/ubd/1 none swap sw W@W@W@Proot:x:0:root bin:x:1:root,bin,daemon daemon:x:2:root,bin,daemon sys:x:3:root,bin,adm adm:x:4:root,adm,daemon tty:x:5: disk:x:6:root lp:x:7:daemon,lp mem:x:8: kmem:x:9: wheel:x:10:root mail:x:12:mail news:x:13:news uucp:x:14:uucp man:x:15: games:x:20: gopher:x:30: dip:x:40: ftp:x:50: lock:x:54: nobody:x:99: users:x:100: rpm:x:37: floppy:x:19: vcsa:x:69: utmp:x:22: nscd:x:28: slocate:x:21: sshd:x:74: rpc:x:32: rpcuser:x:29: nfsnobody:x:65534: mailnull:x:47: smmsp:x:51: pcap:x:77: xfs:x:43: ntp:x:38: gdm:x:42: canna:x:39: lie:x:500: named:x:25: user:x:501: 1sW@d@d@root:aGCTmR/1FMHZg:12432:0:99999:7::: bin:*:12429:0:99999:7::: daemon:*:12429:0:99999:7::: adm:*:12429:0:99999:7::: lp:*:12429:0:99999:7::: sync:*:12429:0:99999:7::: shutdown:*:12429:0:99999:7::: halt:*:12429:0:99999:7::: mail:*:12429:0:99999:7::: news:*:12429:0:99999:7::: uucp:*:12429:0:99999:7::: operator:*:12429:0:99999:7::: games:*:12429:0:99999:7::: gopher:*:12429:0:99999:7::: ftp:*:12429:0:99999:7::: nobody:*:12429:0:99999:7::: rpm:!!:12429:0:99999:7::: vcsa:!!:12429:0:99999:7::: nscd:!!:12429:0:99999:7::: sshd:!!:12429:0:99999:7::: rpc:!!:12429:0:99999:7::: rpcuser:!!:12429:0:99999:7::: nfsnobody:!!:12429:0:99999:7::: mailnull:!!:12429:0:99999:7::: smmsp:!!:12429:0:99999:7::: pcap:!!:12429:0:99999:7::: user:VGDJElapVGXyU:12432:0:99999:7::: pW@d@d@  @@3N<@V@V@LABEL=/1 / ext2 defaults 1 1 none /dev/pts devpts gid=5,mode=620 0 0 none /proc proc defaults 0 0 none /dev/shm tmpfs defaults 0 0 /dev/hda3 swap swap defaults 0 0 |E@;C@[I@root:::root bin:::root,bin,daemon daemon:::root,bin,daemon sys:::root,bin,adm adm:::root,adm,daemon tty::: disk:::root lp:::daemon,lp mem::: kmem::: wheel:::root mail:::mail news:::news uucp:::uucp man::: games::: gopher::: dip::: ftp::: lock::: nobody::: users::: rpm:x:: floppy:x:: vcsa:x:: utmp:x:: nscd:x:: slocate:x:: sshd:x:: rpc:x:: rpcuser:x:: nfsnobody:x:: mailnull:x:: smmsp:x:: pcap:x:: user:!:: guest:!:: c@^@^@nameserver 192.168.0.254 !@^@^@.0.148 redhat9 redhat9.goober.org 192.168.0.151 turbolinux7 turbolinux7.goober.org 192.168.0.250 uml-test uml-test.goober.org 192.168.0.254 router xdisplay <$P{ з{ ,,,Xt  ,H  4 !, ! ", "0 #,l #X $,, $( %, % &, &p ',D ' 8 (, ( ), ) *, * +,d +L ,, ,D -, - .,p .\ /,0 /40,01,1 2,\2@3,3 4,45,50p6,D6$ 7,7`8,h8 \9,09:,: e;; -[vF]) opts="$opts $1 '$2'"""\&V@;kR>TI@"""""""fV@;kR>TI@8"""\(;kR>;kR>TI@""""""""""""""""""""""""Lu@4kR>TI@"""""""""uW@;kR>TI@H""""""""""""@;kR>TI@`""""0V@;kR>TI@ """.;kR>;kR>TI@"""""""gkW@;kR>TI@8"""|)QN@;kR>TI@""""|6V@;kR>TI@ """""""""""""TV@;kR>TI@h"""""FQC@;kR>TI@("""""GYN@;kR>TI@(w"x"y"z"{"|"}"~""""""""""TW@;kR>TI@q"r"s"t"u"v"VQN@;kR>TI@0n"o"p"*;kR>;kR>TI@k"l"m"\&;kR>;kR>TI@h"i"j"\,C@;kR>TI@e"f"g"|/;kR>;kR>TI@^"_"`"a"b"c"d"o@;kR>TI@8V"W"X"Y"Z"["\"]"4xV@;kR>TI@@L"M"N"O"P"Q"R"S"T"U"ܖV@;kR>TI@PG"H"I"J"K"MsW@;kR>TI@(;"<"=">"?"@"A"B"C"D"E"F"t)@;kR>TI@`6"7"8"9":"TI@(1"2"3"4"5"FV@;kR>TI@(!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!""""""""" " " " " """"""""""""""""""" "!"""#"$"%"&"'"(")"*"+","-"."/"0"&}B>&}B>TI@!!!!8V@;kR>TI@ !!!!!FV@;kR>TI@( A~3WwpKWX R,|R0LR, R0R,R0R,hRR,R<RRjRRxRRRsJMRRRRRRi$RRJ&RRx.RRp7/RuJ`?RPzVRR@Y^RR0 ^RR(\#dRRpnRRinstall.log.syslog.bash_profile.cshrcanaconda-ks.cfg.Xresources.bash_history.Xclients.tcshrcupgrade.log.syslog.bash_logoutupgrade.log.bashrcinstall.log.ssh...AW@AW@AW@R( ...A0)@1>cI@R( ...A0)@1>cI@R( ...A0)@6>cI@KP H #KR@ &KAP8 Y)KO0 KO KO cKO KP KO KP KO |KO KO wKR |c KO 2K Ph KOP BKO@ ݦKO0 +#K>P KO KO QdKO KO KO 1KO #KR q$KeR  %KP  &KOx &KOh CA'K PX }(KOH U*KO0 !-K P `.KP 2.KO }V/KP;s5KOK7KP^f9KOi9KO:KOs^=K:Px[ >KKp?K=PX+AKOHAKO8WCK;P xCKOZCKOdFK P `LKOOKOzTK P]VKOYKOk[KOx\KOh ^KOPD^KP@t_KO0_KRU`KO]bKObKO@cKOeKOfKO|gKO?jKP@IoKOxyoKO`VdrK?PP rKO@rK@P0sKO %sK rRFC822; root@uml-test.goober.org RPFD: H?P?RI@0)@]M>I@I@I@0)@]M>I@I@I@I@I@I@0)@]M>I@I@I@I@0)@]M>I@passwd passwd.byname group group.byname networks networks.byaddr hosts hosts.byname protocols protocols.bynumber services services.byname aliases mail.aliases ethers ethers.byname L2>L2>I@( ...A0)@L2>I@20040112  V@*@V@20040112  V@*@V@20040115  V@@V@[C@[C@I@( ...A0)@1>I@V(@@@ ^@^@^@ ^@^@^@86p:~+8`067Pcron.weeklycron.monthlycron.daily...A)@GM@GM@( ...A0V@S>I@ ( ...A0)@uZ>I@ ( ...A0 @@@ ( ...A033@@@ ( ...C0)@?>I@XP5 Ht@spool.SEQ...A`9X@[C@I@( ...A0%%)@^>I@ph`~JX WPguestuserroot...Ax )@@@( ...A0)@1>I@V@V@V@/732 V@V@V@/720 V@V@V@/685 V@V@V@/681 V@V@V@/( ...A0V@:2>I@( ...A0V@23>I@( ...!g) ReIsEr2FsWHoM mIJJCDEJbcvcv5TReIsErLB5`;@;0,0t,H0, , , |,P H,, 0 , x , 0 , `0  ,  0  ,  0x  ,L  0  ,  0 , 0d ,8  ~J,| W,P ,$  ,0 ,6,l6 \7,07  8,8 ,0,\ ,p,h,<,8f_addr}127.0.0.1 S rRFC822; root@uml-test.goober.org RPFD: H?P?RI@0)@]M>I@I@I@0)@]M>I@I@I@I@I@I@0)@]M>I@I@I@I@0)@]M>I@passwd passwd.byname group group.byname networks networks.byaddr hosts hosts.byname protocols protocols.bynumber services services.byname aliases mail.aliases ethers ethers.byname L2>L2>I@( ...A0)@L2>I@20040112  V@*@V@20040112  V@*@V@20040115  V@@V@[C@[C@I@( ...A0)@1>I@V(@@@ ^@^@^@ ^@^@^@86p:~+8`067Pcron.weeklycron.monthlycron.daily...A)@GM@GM@( ...A0V@S>I@ ( ...A0)@uZ>I@ ( ...A0 @@@ ( ...A033@@@ ( ...C0)@?>I@XP5 Ht@spool.SEQ...A`rY@[C@I@( ...A0%%)@^>I@ph`~JX WPguestuserroot...Ax )@@@( ...A0)@1>I@V@V@V@/732 V@V@V@/720 V@V@V@/685 V@V@V@/681 V@V@V@/( ...A0V@:2>I@( ...A0V@23>I@( ...!g) ReIsEr2FsWHoM mIJJCDEJbcvcv5TReIsErLB5`;@;0,0t,H0, , , |,P H,, 0 , x , 0 , `0  ,  0  ,  0x  ,L  0  ,  0 , 0d ,8  ~J,| W,P ,$  ,0 ,6,l6 \7,07  8,8 ,0,\ ,p,h,<,8f_addr}127.0.0.1 S rRFC822; root@uml-test.goober.org RPFD: H?P?RI@0)@]M>I@I@I@0)@]M>I@I@I@I@I@I@0)@]M>I@I@I@I@0)@]M>I@passwd passwd.byname group group.byname networks networks.byaddr hosts hosts.byname protocols protocols.bynumber services services.byname aliases mail.aliases ethers ethers.byname L2>L2>I@( ...A0)@L2>I@20040112  V@*@V@20040112  V@*@V@20040115  V@@V@[C@[C@I@( ...A0)@1>I@V(@@@ ^@^@^@ ^@^@^@86p:~+8`067Pcron.weeklycron.monthlycron.daily...A)@GM@GM@( ...A0V@S>I@ ( ...A0)@uZ>I@ ( ...A0 @@@ ( ...A033@@@ ( ...C0)@?>I@XP5 Ht@spool.SEQ...A`Z@[C@I@( ...A0%%)@^>I@ph`~JX WPguestuserroot...Ax )@@@( ...A0)@1>I@V@V@V@/732 V@V@V@/720 V@V@V@/685 V@V@V@/681 V@V@V@/( ...A0V@:2>I@( ...A0V@23>I@( ...!g) ReIsEr2FsWHoM mIJJCDEJbcvcv5TReIsErLB5`;@;0,0t,H0, , , |,P H,, 0 , x , 0 , `0  ,  0  ,  0x  ,L  0  ,  0 , 0d ,8  ~J,| W,P ,$  ,0 ,6,l6 \7,07  8,8 ,0,\ ,p,h,<,8f_addr}127.0.0.1 S rRFC822; root@uml-test.goober.org RPFD: H?P?RI@0)@]M>I@I@I@0)@]M>I@I@I@I@I@I@0)@]M>I@I@I@I@0)@]M>I@passwd passwd.byname group group.byname networks networks.byaddr hosts hosts.byname protocols protocols.bynumber services services.byname aliases mail.aliases ethers ethers.byname L2>L2>I@( ...A0)@L2>I@20040112  V@*@V@20040112  V@*@V@20040115  V@@V@[C@[C@I@( ...A0)@1>I@V(@@@ ^@^@^@ ^@^@^@86p:~+8`067Pcron.weeklycron.monthlycron.daily...A)@GM@GM@( ...A0V@S>I@ ( ...A0)@uZ>I@ ( ...A0 @@@ ( ...A033@@@ ( ...C0)@?>I@XP5 Ht@spool.SEQ...A`[@[C@I@( ...A0%%)@^>I@ph`~JX WPguestuserroot...Ax )@@@( ...A0)@1>I@V@V@V@/732 V@V@V@/720 V@V@V@/685 V@V@V@/681 V@V@V@/( ...A0V@:2>I@( ...A0V@23>I@( ...!g) ReIsEr2FsWHoM mIJJCDEJbcvcv5TReIsErLB5`;@;0,0t,H0, , , |,P H,, 0 , x , 0 , `0  ,  0  ,  0x  ,L  0  ,  0 , 0d ,8  ~J,| W,P ,$  ,0 ,6,l6 \7,07  8,8 ,0,\ ,p,h,<,8f_addr}127.0.0.1 S rRFC822; root@uml-test.goober.org RPFD: H?P?RI@0)@]M>I@I@I@0)@]M>I@I@I@I@I@I@0)@]M>I@I@I@I@0)@]M>I@passwd passwd.byname group group.byname networks networks.byaddr hosts hosts.byname protocols protocols.bynumber services services.byname aliases mail.aliases ethers ethers.byname L2>L2>I@( ...A0)@L2>I@20040112  V@*@V@20040112  V@*@V@20040115  V@@V@[C@[C@I@( ...A0)@1>I@V(@@@ ^@^@^@ ^@^@^@86p:~+8`067Pcron.weeklycron.monthlycron.daily...A)@GM@GM@( ...A0V@S>I@ ( ...A0)@uZ>I@ ( ...A0 @@@ ( ...A033@@@ ( ...C0)@?>I@XP5 Ht@spool.SEQ...A`]@[C@I@( ...A0%%)@^>I@ph`~JX WPguestuserroot...Ax )@@@( ...A0)@1>I@V@V@V@/732 V@V@V@/720 V@V@V@/685 V@V@V@/681 V@V@V@/( ...A0V@:2>I@( ...A0V@23>I@( ...!g) ReIsEr2FsWHoM mIJJCDEJbcvcv5O!.{+4:#:`ty#+++B+':0chYReIsErLB<$P{ з{ ,,,Xt  ,H  4 !, ! ", "0 #,l #X $,, $( %, % &, &p ',D ' 8 (, ( ), ) *, * +,d +L ,, ,D -, - .,p .\ /,0 /40,01,1 2,\2@3,3 4,45,50p6,D6$ 7,7`8,h8 \9,09:,: e;; -[vF]) opts="$opts $1 '$2'"""\&V@;kR>TI@"""""""fV@;kR>TI@8"""\(;kR>;kR>TI@""""""""""""""""""""""""Lu@4kR>TI@"""""""""uW@;kR>TI@H""""""""""""@;kR>TI@`""""0V@;kR>TI@ """.;kR>;kR>TI@"""""""gkW@;kR>TI@8"""|)QN@;kR>TI@""""|6V@;kR>TI@ """""""""""""TV@;kR>TI@h"""""FQC@;kR>TI@("""""GYN@;kR>TI@(w"x"y"z"{"|"}"~""""""""""Ts]@;kR>TI@q"r"s"t"u"v"VQN@;kR>TI@0n"o"p"*;kR>;kR>TI@k"l"m"\&;kR>;kR>TI@h"i"j"\,C@;kR>TI@e"f"g"|/;kR>;kR>TI@^"_"`"a"b"c"d"o@;kR>TI@8V"W"X"Y"Z"["\"]"4xV@;kR>TI@@L"M"N"O"P"Q"R"S"T"U"ܖV@;kR>TI@PG"H"I"J"K"MsW@;kR>TI@(;"<"=">"?"@"A"B"C"D"E"F"t)@;kR>TI@`6"7"8"9":"TI@(1"2"3"4"5"FV@;kR>TI@(!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!""""""""" " " " " """"""""""""""""""" "!"""#"$"%"&"'"(")"*"+","-"."/"0"&}B>&}B>TI@!!!!8V@;kR>TI@ !!!!!FV@;kR>TI@(wKK,wKK wKK,wKK,pwKK dwKK,8wKK ,wKK,wKK KK,KK 0 KK, KQ, KhJ, KhJHd KyJ,8 KyJ KzJ,d KzJK,KKK,KK<KO,KOKO,KOKO,KOhHKO,KOU*OOPlibthread_db-1.0.solibm-2.3.2.solibm.so.6...AHV@C@aI@KKKKKKKKKKKKKKKKKKKKKKKKKK^@%q>aI@ld-2.3.2.so ^@aI@aI@KOKOOKOKOOx1OOhU*OOPlibthread_db-1.0.solibm-2.3.2.solibm.so.6...AH@C@aI@KKKKKKKKKKKKKKKKKKKKKKKKKKs]@%q>aI@ld-2.3.2.so s]@aI@aI@KOKOO1OOt_OO@IoOOsOO}OOlibpthread-0.10.solibc.so.6libpthread.so.0libc-2.3.2.solibm-2.3.2.solibm.so.6...A@C@aI@KKxKpLKKhV\Kd`^cK>P2.4.22-3um2.4.222.4.20-8...AV@L@L@KKi$?p\#d`.bash_profile.bash_history.bash_logout.bashrc...AW@@@KzJ=zJ{Ji$zJ|J7/zJRp\#dzJ}J`.bash_profile.Xclients.bash_logout.bashrc...A)@^@^@KyJ=yJTi$yJU7/yJZp\#dyJV`.bash_profile.Xclients.bash_logout.bashrc...A)@^@^@KhJ@=8qhJiJ0html...AH)@^@^@^@^@^@*H>*H>[I@# Sample stunnel configuration file # Copyright by Michal Trojnara 2002 # Comment it out on Win32 cert = /usr/etc/stunnel/mail.pem chroot = /usr/var/run/stunnel/ # PID is created inside chroot jail pid = /stunnel.pid setuid = nobody setgid = nogroup # Workaround for Eudora bug #options = DONT_INSERT_EMPTY_FRAGMENTS # Authentication stuff #verify = 2 # don't forget about c_rehash CApath # it is located inside chroot jail: #CApath = /certs # or simply use CAfile instead: #CAfile = /usr/etc/stunnel/certs.pem # Some debugging stuff #debug = 7 #output = stunnel.log # Use it for client mode #client = yes # Service-level configuration [pop3s] accept = 995 connect = 110 [imaps] accept = 993 connect = 143 [ssmtp] accept = 465 connect = 25 [s1] accept = 5000 connect = mail.osw.pl:110 # delay = yes [s2] accept = 5001 connect = mail.osw.pl:25 #[https] #accept = 443 #connect = 80 #TIMEOUTclose = 0 *H>*H>[I@..03C@C@[I@..03C@C@[I@...03@C@[I@C@Z>[I@..03@C@[I@T69@9Y/JHJA HJ,HJ HJ,HJ |H&J,PH&JHH(J, H(J H)J, H)J H*J,d H*JT H+J,( H+J H,J, H,J H-J, H-J H.J,t H.Jd H/J,8 H/J( H0J, H0J, H6J, H6JP H8J, H8J H9J,H9J , , ,,,,,,,,,,,,,,,,,,, ,!,",#,$,%,&,',(,),*,+,,,-,.,/,0,1,2,3,4,5,6,7,8,9,:,;,<,=,>,?,@,A,B,C,D,E,F,G,H,I,J,K,L,M,N,O,P,Q,R,S,T,U,V,W,X,Y,Z,[,\,],^,_,`,a,b,c,d,e,f,g,h,i,j,k,l,m,n,o,p,q,r,s,t,u,v,w,x,y,z,{,|,},~,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,D s]@h92>YI@# *REQUIRED* # Directory where mailboxes reside, _or_ name of file, relative to the # home directory. If you _do_ define both, MAIL_DIR takes precedence. # QMAIL_DIR is for Qmail # #QMAIL_DIR Maildir MAIL_DIR /var/spool/mail #MAIL_FILE .mail # Password aging controls: # # PASS_MAX_DAYS Maximum number of days a password may be used. # PASS_MIN_DAYS Minimum number of days allowed between password changes. # PASS_MIN_LEN Minimum acceptable password length. # PASS_WARN_AGE Number of days warning given before a password expires. # PASS_MAX_DAYS 99999 PASS_MIN_DAYS 0 PASS_MIN_LEN 5 PASS_WARN_AGE 7 # # Min/max values for automatic uid selection in useradd # UID_MIN 500 UID_MAX 60000 # # Min/max values for automatic gid selection in groupadd # GID_MIN 500 GID_MAX 60000 # # If defined, this command is run when removing a user. # It should remove any at/cron/print jobs etc. owned by # the user to be removed (passed as the first argument). # #USERDEL_CMD /usr/sbin/userdel_local # # If useradd should create home directories for users by default # On RH systems, we do. This option is ORed with the -m flag on # useradd command line. # CREATE_HOME yes d@J>YI@H6JHH@(6J7J0macros.specspo...AP@C@YI@H0JH{p0J2J, r0J3J,s0J4JAt0J5Jz0J1Jprt_dsfieldrt_tablesrt_scopesrt_realmsrt_protos...A@C@YI@rc.d/rc6.d s]@YI@YI@rc.d/rc5.d s]@YI@YI@rc.d/rc4.d s]@YI@YI@rc.d/rc3.d s]@YI@YI@rc.d/rc2.d s]@YI@YI@rc.d/rc1.d s]@YI@YI@rc.d/rc0.d s]@YI@YI@rc.d/init.d s]@YI@YI@H&J@H8Z&J'J0useradd...AH@C@YI@HJH>'JJJ%JP+J#Jev,J Je-J"JtRJ!J|J$Jmta-newaliasesmanmta-newaliasesmta-rmailmta-mailqmta-mailqmanmta-aliasesmanmta...A@C@YI@,,,%s]@E@YI@freebsd-ypxfrd 0…Sҡb)4&hTkKO,KOKO,KOKO,\KO\KO,KOKO,KOKO,XKOHKO,KO KO, KO KO, KO KO,p KO d KO,8 KO( KO, KO KO, KO KP, KPp KP,D KP, KP, KP KP, KP KP,h KPX KP,, KP$ KP, KP KP, KP KP,` KPP K P,$ K P K P, K PP:U;UU?U@UAUBUCUDUEUFUGUHUIUJUKULUMUNUOUPUQURUSUTUUUVUWUXUYUZU[U\U]U^U_U`UaUbUcUdUeUfUgUhUiUjUkUlUmUnUoUpUqUrUsUtUuUvUwUxUyUzU{U|U}U~UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUVVVVVVVVV V V V V VVVVVVVVVVVVVVVVVVV V!V"V#V$V%V&V'V(V)V*V+V,V-V.V/V0V1V2V3V4V5V6V7V8V9V:V;VV?V@VAVBVCVDVEVFVGVHVIVJVKVLVMVNVOVPVQVRVSVTVUVVVWVXVYVZV[V\V]V^V_V`VaVbVcVdVeVfVgVhViVjVkVlVmVnVoVpVqVrVsVtVuVvVwVxVyVzV{V|V}V~VVVVVVVVVVVVVVVVVm~!E@pbI@liblvm-10.so.1.0bI@bI@bI@liblvm-10.so.1.0bI@bI@bI@7U8U9U.s]@@?>bI@libtermcap.so.2.0.8s]@bI@bI@.U/U0U1U2U3U4U5U6UpW@(2>bI@Hlibpcre.so.0.0.1pW@bI@bI@libgcc_s-3.2.2-20030225.so.1^@bI@bI@&U'U(U)U*U+U,U-Utv^@ u[>bI@@libcrypto.so.0.9.7aV@bI@bI@libssl.so.0.9.7a@bI@bI@libacl.so.1.0.3W@bI@bI@ U!U"U#U$U0KW@m#7>bI@(libattr.so.1.0.1W@bI@bI@UUU&E@{1>bI@libuuid.so.1.2bI@bI@bI@UUW@7>bI@libss.so.2.0 bI@bI@bI@UUUU@>E@{1>bI@ libext2fs.so.2.4V@bI@bI@UUUUU HE@{1>bI@(R:@AFLHMHNHOHPHQHRHSHIIII U U UUUUUhaV@{1>bI@libcom_err.so.2.0V@bI@bI@@:D:V@{1>bI@%'_|/?LKOOPKO,$KOXKO,KOKO,dKO\KO,0KOKO, KO KO, KO KO,p KO` KO,4 KOHKO,KO KO,KOKO,KOKO,XKOHKO,KO KO,KOKO,KOKO,KO\LKO, KOKO,KO8KK,AKOLOMONOOOPOQOROSOTOUOVOWOXO,E@%q>aI@plibnsl-2.3.2.sooW@aI@aI@4O5O6O7O8O9O:O;OO?O@OAOBOCODOEOFOGOHOIOJOeoW@%q>aI@libm-2.3.2.so V@aI@aI@OOOOOOOOO O O O O OOOOOOOOOOOOOOOOOOO O!O"O#O$O%O&O'O(O)O*O+O,O-O.O/O0O1O2O3O;V@%q>aI@libdl-2.3.2.soW@aI@aI@NNNN:W@%q>aI@ libcrypt-2.3.2.sooW@aI@aI@NNNNNNt\oW@%q>aI@0libc-2.3.2.so s]@aI@aI@{M|M}M~MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMNNNNNNNNN N N N N NNNNNNNNNNNNNNNNNNN N!N"N#N$N%N&N'N(N)N*N+N,N-N.N/N0N1N2N3N4N5N6N7N8N9N:N;NN?N@NANBNCNDNENFNGNHNINJNKNLNMNNNONPNQNRNSNTNUNVNWNXNYNZN[N\N]N^N_N`NaNbNcNdNeNfNgNhNiNjNkNlNmNnNoNpNqNrNsNtNuNvNwNxNyNzN{N|N}N~NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNs]@%q>aI@ libanl-2.3.2.soaI@aI@aI@wMxMyMzM<8E@%q>aI@ rMsMtMuMvMDE@%q>aI@(libBrokenLocale-2.3.2.soaI@aI@aI@pMqME@%q>aI@libe2p.so.2.3 aI@aI@aI@KOPKH!OO0libe2fsim.1.2.1.so...AX@ C@aI@OOOt_OO@IoOOxsOOh05~OOPlibpthread-0.29.solibc.so.6libpthread.so.0libc-2.3.2.solibthread_db.so.1 UT]hUZ],<UZ] Uh],x Uh] Uv], Uv] U}],U}]defghijklmnopqrstuvwxyz{|}~¡áġšơǡȡɡʡˡ̡͡ΡϡСѡҡӡԡա֡סء١ڡۡܡݡޡߡ  !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~¢âĢŢƢǢȢɢʢˢ̢͢΢ϢТѢҢӢԢբ֢עآ٢ڢۢܢݢޢߢ  !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abc]s]@B@I@0Uv]UU <]E]O v]|]xv]z]hJJ/v]x]Xɨ>UUH>UU8rIv]y]( bv]w].hUU#r<]C]sUUxv]{]LC_MONETARYLC_PAPERLC_CTYPELC_COLLATELC_IDENTIFICATIONLC_MESSAGESLC_NUMERICLC_MEASUREMENTLC_ADDRESSLC_TELEPHONELC_TIMELC_NAME...A)@B@yI@Uh]UU h]r]O h]u]xh]p]hJJ/h]j]Xɨ>h]o]H>h]s]8rIh]m]( bh]i].hh]k]#rh]l]sh]t]xh]q]LC_MONETARYLC_PAPERLC_CTYPELC_COLLATELC_IDENTIFICATIONLC_MESSAGESLC_NUMERICLC_MEASUREMENTLC_ADDRESSLC_TELEPHONELC_TIMELC_NAME...A)@B@yI@UZ]UU Z]d]O Z]g]xZ]b]hJJ/Z]\]Xɨ>Z]a]H>Z]e]8rIZ]_]( bZ][].hZ]]]#rZ]^]sZ]f]xZ]c]LC_MONETARYLC_PAPERLC_CTYPELC_COLLATELC_IDENTIFICATIONLC_MESSAGESLC_NUMERICLC_MEASUREMENTLC_ADDRESSLC_TELEPHONELC_TIMELC_NAME...A)@B@yI@UT]UU T]V]O T]Y]xT]X]hJJ/UUXɨ>UUH>UU8rIT]U]( bT]W].hUU#rUUsUUxWWLC_MONETARYLC_PAPERLC_CTYPELC_COLLATELC_IDENTIFICATIONLC_MESSAGESLC_NUMERICLC_MEASUREMENTLC_ADDRESSLC_TELEPHONELC_TIMELC_NAME...xnwwxhnwx,lnwxhnwx,nwxhpnwx,Dnwx nwx, nwx nwx, nwxh nw y,X nw y nw#y, nw#yhD nwI@nw#y`nnwXO #y:yPrI#y$y@LC_MESSAGESLC_TIME...Ah)@!C@I@nw yxnnwp& y"yhO y y`rI y yPLC_MESSAGESLC_TIMEman...A)@sC@I@nwx`nnwXO xyPrIxx@LC_MESSAGESLC_TIME...Ah)@!C@I@nwxxnnwp&xxhO xx`rIxxPLC_MESSAGESLC_TIMEman...A)@sC@I@nwxxnnwp&xxhO xx`rIxxPLC_MESSAGESLC_TIMEman...A)@sC@I@nwx`nnwXO xxPrIxx@LC_MESSAGESLC_TIME...Ah)@!C@I@nwx`nnwX&xxPrIxx@LC_MESSAGESman...Ah)@sC@I@nwwx`nnwXO wxxPrIwxxx@LC_MESSAGESLC_TIME...,45bb2a6c61b1dadeaan`q H,HHH@8HJ0rc...0HHH('H2I )(HJ(HvK(HJ(H6J3)HJ9H=IyHJnHJHwKۮH.IH$H@IH3IHIHTJH&JFH8Ipf HI` HJX H:JHlc HI8 HJ(6 H&I& HJJHHJfdprmalternativescsh.loginauto.mastercsh.cshrcmakedev.dcrontab.inittab.swpsecurettydefaultissue.netgroup.lockskelrc.dmtabmotdmailisdnpwdb.confnsswitch.confsshrpmrpcrmtpppH@8HJ0rc...A `s]@W@W@`qn ^dqn eqn fqn gqn |qnH lqnI rn ʾrn rn rn rn rnH sn sn snx snp snh sn` snX snP /snH ssn@ sn8 Dsn0 Msn( Usn ntn  Motn  gotn  uotn ptn tn \tn etn tn *tn Qtn atn ntn tn tn ctn tn tn tn 1vnC HvnCx  vn+p vn,h vn-` vn.X  vn/P ovnH ovn@ pvn8 qvn0 qvn( qvn qvn qvn 4rvn yrvn uvn Iwvn  Rxvn! [yvn# Զvn >vn~ wn wnK RwnL mwnM zwnN wnO xnH Xxn xn  xn5 b xn6x j!xn7p  "xn8h /"xn9` V"xn:X f"xn;P s"xn<H "xn=@ "xn>8 h&xn?0 'xn@( (xnA )xnC ߤxn ߤxn xn xnxnxnxnxnxnxnynynUynVynWynXynYynZyn[yn\:yn]x~yn^pyn_hNyn``WynaX`yncP znH zn@ zn8 zn0 zn( zn zn ""n)!Hn ^n ntpqic150ntpqic120psmouseatimouseirlpt15irlpt14irlpt13irlpt12irlpt11irlpt10fd7u3840fd7u3520fd7u3200fd7u2880fd7u1920fd7u1840fd7u1760fd7u1743fd7u1722fd7u1680fd7u1660fd7u1440fd7u1120fd7u1040inportbmircomm9ircomm8ircomm7ircomm6ircomm5ircomm4ircomm3ircomm2ircomm1ircomm0fd6u3840fd6u3520fd6u3200fd6u2880fd6u1920fd6u1840fd6u1760fd6u1743fd6u1722fd6u1680fd6u1660fd6u1440fd6u1120fd6u1040cm206cdcm205cdvpcmousefd7h1660fd7h1494fd7h1476fd7h1440fd7h1200ipstatemdspstatipmikcsfd5u3840fd5u3520fd5u3200fd5u2880fd5u1920fd5u1840fd5u1760fd5u1743fd5u1722fd5u1680fd5u1660fd5u1440fd5u1120fd5u1040fd6h1660fd6h1494fd6h1476fd6h1440fd6h1200tpqic150tpqic120fd4u3840fd4u3520fd4u3200fd4u2880fd4u1920fd4u1840fd4u1760fd4u1743fd4u1722fd4u1680fd4u1660fd4u1440fd4u1120fd4u1040fd5h1660fd5h1494fd5h1476fd5h1440fd5h1200fd3u3840fd3u3520fd3u3200fd3u2880fd3u1920fd3u1840fd3u1760fd3u1743fd3u1722fd3u1680fd3u1660fd3u1440fd3u1120fd3u1040initctlfd4h1660fd4h1494fd4h1476fd4h1440fd4h1200fd7CompaQvttunerfd2u3840fd2u3520fd2u3200fd2u2880fd2u1920 ZY[HJ H HJ, HJ <HJ,HJ(HJ,HJHJ,HJ HJ ile describes how the INIT process should set up # the system in a certain run-level. # # Author: Miquel van Smoorenburg, # Modified for RHS Linux by Marc Ewing and Donnie Barnes # # Default runlevel. The runlevels used by RHS are: # 0 - halt (Do NOT set initdefault to this) # 1 - Single user mode # 2 - Multiuser, without NFS (The same as 3, if you do not have networking) # 3 - Full multiuser mode # 4 - unused # 5 - X11 # 6 - reboot (Do NOT set initdefault to this) # id:3:initdefault: # System initialization. si::sysinit:/etc/rc.d/rc.sysinit l0:0:wait:/etc/rc.d/rc 0 l1:1:wait:/etc/rc.d/rc 1 l2:2:wait:/etc/rc.d/rc 2 l3:3:wait:/etc/rc.d/rc 3 l4:4:wait:/etc/rc.d/rc 4 l5:5:wait:/etc/rc.d/rc 5 l6:6:wait:/etc/rc.d/rc 6 # Trap CTRL-ALT-DELETE ca::ctrlaltdel:/sbin/shutdown -t3 -r now # When our UPS tells us power has failed, assume we have a few minutes # of/dev/dev/ubd/0 / /dev/dev/ubd/0 / reiserfs defaults 1 1 none /dev/pts devpts gid=5,mode=620 0 0 none /proc proc defaults 0 0 W@W@W@Urc.d/rcs]@ZI@ZI@HJH JJ JJJJJJO7JJ(_JJdJJpOgJJhGGjJJXkJJHlJJ@LlmJJ0OtJJ(}PwJJ JJchap-secretsipv6-uppluginsip-down.ipv6to4ip-downpap-secretsip-up.ipv6to4optionsipv6-downpppoe-server-optionsfirewall-standalonepeersip-upioptionsfirewall-masq...A@C@ZI@# /etc/fdprm - floppy disk parameter table # Common disk formats. Names are of the form # actual media capacity/maximum drive capacity # (Note: although 5.25" HD drives can format disks at 1.44M, they're listed # as 1200 because that's the common maximum size.) # size sec/t hds trk stre gap rate spec1 fmt_gap 360/360 720 9 2 40 0 0x2A 0x02 0xDF 0x50 1200/1200 2400 15 2 80 0 0x1B 0x00 0xDF 0x54 360/720 720 9 2 40 1 0x2A 0x02 0xDF 0x50 720/720 1440 9 2 80 0 0x2A 0x02 0xDF 0x50 720/1440 1440 9 2 80 0 0x2A 0x02 0xDF 0x50 360/1200 720 9 2 40 1 0x23 0x01 0xDF 0x50 720/1200 1440 9 2 80 0 0x23 0x01 0xDF 0x50 1440/1440 2880 18 2 80 0 0x1B 0x00 0xCF 0x6C # Non-standard disk formats: # BEWARE: They're incomplete and possibly incorrect. The only reason why # they are in this file is to show how such formats are added. 1440/1200 2880 18 2 80 0 ???? ???? ???? ???? # ????? 1680/1440 3360 21 2 80 0 0x0C 0x00 0xCF 0x6C # ????? # Add user-specific formats here cbm1581 1600 10 2 80 2 0x2A 0x02 0xDF 0x2E 800/720 1600 10 2 80 0 0x2A 0x02 0xDF 0x2E Z>Z>ZI@# Log all kernel messages to the console. # Logging much else clutters up the screen. #kern.* /dev/console # Log anything (except mail) of level info or higher. # Don't log private authentication messages! *.info;mail.none;authpriv.none;cron.none /var/log/messages # The authpriv file has restricted access. authpriv.* /var/log/secure # Log all the mail messages in one place. mail.* /var/log/maillog # Log cron stuff cron.* /var/log/cron # Everybody gets emergency messages *.emerg * # Save news errors of level crit and higher in a special file. uucp,news.crit /var/log/spooler # Save boot messages also to boot.log local7.* /var/log/boot.log HpK `HqK,4HqK  HrK, HrKx HsK,L HsK < HtK, HtK HuK, HvK, HvK HwK,d HwK8,HK,HK0HK,HK HK,HK0HK,HK X,H# this is an example warnquota.conf # ; ; and # type comments are allowed # and even blank lines # values can be quoted: MAIL_CMD = "/usr/sbin/sendmail -t" FROM = "root@localhost" # but they don't have to be: # SUBJECT = NOTE: You are exceeding your allocatted disk space limits CC_TO = "root@localhost" SUPPORT = "root@myhost.com" PHONE = "(123) 456-1111 or (222) 333-4444" # Text in the beginning of the mail (if not specified, default text is used) # This way text can be split to more lines # Line break are done by '|' character # MESSAGE = Your disk usage has exceeded the agreeded limits\ on this server|Please delete any unnecessary files on following filesystems:| # Text in the end of the mail (if not specified, default text using SUPPORT and PHONE # is created) # SIGNATURE = root@localhost # end of example warnquota.con`e[>e[>[I@HK(H ...A0V@S>[I@PRUNEFS="devpts NFS nfs afs sfs proc smbfs autofs auto iso9660" PRUNEPATHS="/tmp /usr/tmp /var/tmp /afs /net /sfs" export PRUNEFS export PRUNEPATHS @S>[I@HK(H ...A0@Z>[I@HwK0H(QwKyK  wKK'fwKKpfwKKwKK#)wKKN5wKzK)n8wKKsn8wKKZ?wK}KLwKxKRwKKx[wKKh!9nwK~KXvwKKHwxwK{K8+wK|K0helpfiledomaintabledomaintable.dbmailertablestatisticsvirtusertablelocal-host-namestrusted-userssubmit.mcsubmit.cfaccessaccess.dbmailertable.dbsendmail.mcsendmail.cfvirtusertable.dbMakefile...A8@C@[I@../sbin/rmt s]@[I@[I@51>51>[I@......,V1>1>[I@0WORKGROUP  C@C@[I@..6C@C@[I@# # /etc/nscd.conf # # An example Name Service Cache config file. This file is needed by nscd. # # Legal entries are: # # logfile # debug-level # threads <#threads to use> # server-user # server-user is ignored if nscd is started with -S parameters # # enable-cache # positive-time-to-live