Publications of Kenneth C. Smith

This page is a list of Prof. Kenneth C. Smith's publication. Prof. Smith is Professor Emeritus, University of Toronto cross-appointed to the Department of Electrical and Computer Engineering, Department of Computer Science, and Department of Mechanical Engineering.

Books

  1. A. Sedra, K.C. Smith, Microelectronic Circuits, Thomson Learning, 1982.
  2. A. Sedra, K.C. Smith, Microelectronic Circuits, 2nd ed. London, U.K.: Oxford Univ. Press, 1987.
  3. A. Sedra, K.C. Smith, Microelectronic Circuits, 3rd ed. London, U.K.: Oxford Univ. Press, 1991.
  4. S.M. Fakhraie, K.C. Smith, VLSI-Compatible Implementations for Artificial Neural Networks, Norwell, MA: Kluwer, 1997.
  5. K. C. Smith, KCs Problems and Solutions for Microelectronic Circuits, 4th ed. London, U.K.: Oxford Univ. Press, 1998.
  6. K.C. Smith, Laboratory Explorations to Microelectronic Circuits, 4th ed. London, U.K.: Oxford Univ. Press, 1998.
  7. A. Sedra, K.C. Smith, Microelectronic Circuits, 5th ed. London, U.K.: Oxford Univ. Press, 2004.
  8. A. Sedra, K.C. Smith, Microelectronic Circuits, 6th ed. London, U.K.: Oxford Univ. Press, 2009.

Journal and Conference Papers

  1. R.W. McKay, K.C. Smith, “Effect of previous history on switching rate in ferrites,” Journal of Applied Physics, vol. 31, no. 5, pp. S133-S134, May 1960.
  2. K.C. Smith, Design of circuits for the pattern articulation unit, University of Illinois, Urbana, Report no. 127, 31 August 1962.
  3. K.C. Smith, D. Hall, Observations of the operation of a 3-bit bubbling register, University of Illinois, Urbana, Report NP‑12308, 31 August 1962.
  4. S.R. Ray, K. C. Smith, Design of an Iterative Pattern Recognition Processor, University of Illinois at Urbana-Champaign, Urbana, Illinois, Report no. 161, 1964.
  5. B.H. McCormick, S.R. Ray, K.C. Smith, S. Yamada, Illiac III: A processor of visual information, University of Illinois, Urbana, Report no. 183, 10 June 1965.
  6. K.C. Smith, A.S. Sedra, “Simple wideband linear voltage-to-frequency converter,” Electronic Engineering, vol. 40, pp. 140‑143, 1968.
  7. K.C. Smith, A. Sedra, “The current conveyor—A new circuit building block,” Proceedings of the IEEE, vol. 56, no. 8, pp. 1368‑1369, August 1968.
  8. K.C. Smith, A.S. Sedra, “Simple digitally-controlled variable-gain linear dc amplifier,” Electronic Engineering, vol. 41, no. 493, pp. 362, 1969.
  9. Kenneth C. Smith, Adel S. Sedra, “A new simple wide-band current-measuring device,” IEEE Transactions on Instrumentation and Measurement, vol. 18, no. 2, pp. 125‑128, June 1969.
  10. G.G.A. Black, K.C. Smith, “Novel applications of a variable-threshold transistor,” International Electronics Conferenc, pp. 30‑31, October 1969.
  11. P.I.P. Boulton, R. Paau, K.C. Smith, “A typewriting system for the seriously handicapped,” International Electronics Conference, pp. 48‑49, October 1969.
  12. A. Sedra, K.C. Smith, “A second-generation current conveyor and its applications,” IEEE Transactions on Circuit Theory, vol. 17, no. 1, pp. 132‑134, February 1970.
  13. K.C. Smith, A. Sedra, “Realization of the Chua family of new nonlinear network elements using the current conveyor,” IEEE Transactions on Circuit Theory, vol. 17, no. 1, pp. 137‑139, February 1970.
  14. Zvonko G. Vranesic, E. Stewart Lee, Kenneth C. Smith, “A many-valued algebra for switching systems,” IEEE Transactions on Computers, vol. 19, no. 10, pp. 964‑971, October 1970.
  15. K.C. Smith, Z.G. Vranesic, L. Janczewski, “Circuit implementations of multivalued logic,” International Symposium on Multiple-Valued Logic (ISMVL), pp. 133‑139, 1971.
  16. J. N. Potvin, P. Chenevert, Kenneth C. Smith, P. Boulton, “Star-Ring: A computer intercommunication and I/O system,” IFIP Congress (1), pp. TA4156-TA4161, 1971.
  17. Christopher Pottle, Michael I. Dertouzos, Imsong Lee, Kenneth C. Smith, “On important current issues concerning computers in electrical engineering education,” IEEE Transactions on Education, vol. 14, no. 4, pp. 169‑174, November 1971.
  18. Adel S. Sedra, Safwat G. Zaky, Kenneth C. Smith, “A feedback model for active n-port networks derived from a concept of port orientation,” IEEE Transactions on Circuit Theory, vol. 19, no. 2, pp. 168‑175, March 1972.
  19. K.C. Smith, A. Sedra, “The Kirchhoff data link,” IEEE Transactions on Instrumentation and Measurement, vol. 21, no. 3, pp. 288‑291, August 1972.
  20. L.W. Organ, A. Bernstein, I.H. Rowe, K.C. Smith, “The pre-ejection period of the fetal heart: detection during labor with Doppler ultrasound,” American Journal of Obstetrics and Gynecology, vol. 115, no. 3, pp. 369‑376, February 1973.
  21. Gary G.A. Black, Kenneth C. Smith, “A JFET circuit for instrumentation applications,” IEEE Transactions on Instrumentation and Measurement, vol. 22, no. 1, pp. 2‑8, March 1973.
  22. A.J. Cousin, I.H. Rowe, K.C. Smith, L.W. Organ, “On automated detection of the cardiac preejection period,” International Electrical, Electronics Conference and Exposition, pp. 44‑45, October 1973.
  23. Z.G. Vranesic, K.C. Smith, A. Druzeta, “Electronic implementation of multi-valued logic networks,” International Symposium on Multiple-Valued Logic (ISMVL), pp. 59‑78, 1974.
  24. R.R. Tasker, L.W. Organ, K.C. Smith, “Physiological guidelines for the localization of lesions by percutaneous cordotomy,” Acta Neurochirurgica vol. 21, pp. 111‑117, 1974.
  25. Eric Vannerson, K.C. Smith, “A low-distortion oscillator with fast amplitude stabilization,” IEEE International Symposium on Circuits and Systems (ISCAS), pp. 142‑146, April 1974.
  26. A.J. Cousin, K.C. Smith, I.H. Rowe, “On automated recognition of families of swept-frequency transient signals,” IEEE International Symposium on Circuits and Systems (ISCAS), pp. 152‑156, April 1974.
  27. A.J. Cousin, K.C. Smith, I.H. Row, L.W. Organ, “A cardiac pre-ejection period monitor for foetal assessment during labour,” Medical and Biological Engineering, vol. 12, no. 4, pp. 479‑482, July 1974.
  28. Eric Vannerson, Kenneth C. Smith, “Fast amplitude stabilization of an RC oscillator,” IEEE Journal of Solid-State Circuits, vol. 9, no. 4, pp. 176‑179, August 1974.
  29. L.W. Organ, A. Bernstein, K.C. Smith, I.H. Rowe, “The pre-ejection period of the fetal heart: patterns of change during labor,” American Journal of Obstetrics and Gynecology, vol. 120, no. 1, pp. 49‑55, September 1974.
  30. Z.G. Vranesic, K.C. Smith, “Engineering aspects of multi-valued logic systems,” Computer, vol. 7, no. 9, pp. 34‑41, September 1974.
  31. Eric Vannerson, K.C. Smith, “A low-distortion oscillator with fast amplitude stabilization,” International Journal of Electronics, vol. 39, no. 4, pp. 465‑472, 1975.
  32. A.J. Cousin, K.C. Smith, I.H. Rowe, “Sequential transient filtering: An automated method of frequency derivative detection,” International Journal of Electronics, vol. 38, no. 6, pp. 761‑771, 1975.
  33. Michael J. Corinthios, Kenneth C. Smith, Jui L. Yen, “A parallel radix-4 fast Fourier transform computer,” IEEE Transactions on Computers, vol. 24, no. 1, pp. 80‑92, January 1975.
  34. E.A. Ozkarahan, S.A. Schuster, K.C. Smith, “RAP—An associative processor for data base management,” Proceedings of the National Computer Conference, pp. 379‑387, May 1975.
  35. Alan J. Cousin, Kenneth C. Smith, Ian H. Rowe, “A calibrated ultrasonic field measuring system for general use,” IEEE Transactions on Instrumentation and Measurement, vol. 24, no. 4, pp. 317‑321, December 1975.
  36. A. Bernstein, L.W. Organ, L.E. Eisner, K.C. Smith, I.H. Rowe, “Measurement of the pre-ejection period during labor with the use of arterial pulse time,” American Journal of Obstetrics and Gynecology, vol. 126, no. 2, 1976.
  37. K.C. Smith, “Circuits for multiple valued logic—A tutorial and appreciation,” International Symposium on Multiple-Valued Logic (ISMVL), pp. 30‑43, 1976.
  38. H.T. Mouftah, K.C. Smith, Z.G. Vranesic, “Ternary logic in a positional control system,” International Symposium on Multiple-Valued Logic (ISMVL), pp. 135‑141, 1976.
  39. S.A. Schuster, E.A. Ozkarahan, K.C. Smith, “A virtual memory system for a relational associative processor,” Proceedings of the National Computer Conference, pp. 855‑862, June 1976.
  40. K.C. Smith, “The impact of technology on electrical engineering education, particularly in electronics and instrumentation,” Canadian Conference on Electrical Engineering Education, pp. 51‑57, June 1976.
  41. S.A. Schuster, H.B. Nguyen, E.A. Ozkarahan, K.C. Smith, “RAP.2—An associative processor for data bases ,” International Symposium on Computer Architecture (ISCA), pp. 52‑59, 1978.
  42. H.T. Mouftah, K.C. Smith, “Three-valued C.M.O.S. cycling gates,” Electronics Letters, vol. 14, no. 2, pp. 36‑37, January 1978.
  43. A.J. Cousin, K.C. Smith, “Instantaneous cardiac tachometer with extendable range,” Medical and Biological Engineering and Computing, vol. 16, no. 4, pp. 379‑382, July 1978.
  44. Guy Fedorkow, William Buxton, K.C. Smith, “A computer-controlled sound distribution system for the performance of electroacoustic music,” Computer Music Journal, vol. 2, no. 3, pp. 33‑42, December 1978.
  45. William Buxton, E.A. Fogels, Guy Fedorkow, Lawrence Sasaki, K.C. Smith, “An introduction to the SSSP digital synthesizer,” Computer Music Journal, vol. 2, no. 4, pp. 28‑38, December 1978.
  46. Stewart A. Schuster, H.B. Nguyen, Esen A. Ozkarahan, Kenneth C. Smith, “RAP.2—An associative processor for databases and its applications,” IEEE Transactions on Computers, vol. 28, no. 6, pp. 446‑458, June 1979.
  47. Sudhir K. Arora, Lea Ginzberg, K.C. Smith, “An approach to the analysis of context free languages,” Proceedings of the 1979 Conference on Information Sciences and Systems, pp. 524‑531, 1979.
  48. E. Bustos, J.D. Lavers, K.C. Smith, “A parallel array of microprocessors—An alternative solution to diffusion problems,” Compcon, pp. 380‑389, September 1979.
  49. J.H. Ting, F.E. Holmes, K.C. Smith, “An automatic semiconductor parameter measurements and analysis system using microprocessor based computer system,” International Electrical, Electronics Conference and Exposition,  pp. 120‑121, October 1979.
  50. Sudhir K. Arora, K.C. Smith, “A theory of well-connected relations,” Information Sciences, vol. 19, no. 2, pp. 97‑134, November 1979.
  51. W. Buxton, W. Reeves, G. Fedorkow, K.C Smith, R. Baecker, “A computer-based system for the performance of electroacoustic music,” Audio Engineering Society Convention 64, November 1979.
  52. Sudhir K. Arora, K.C. Smith, “WCRL: A data model independent language for database systems,” International Journal of Computer and Information Sciences, vol. 9, no. 4, pp. 287‑305, 1980.
  53. W. Buxton, W. Reeves, G. Fedorkow, K.C. Smith, R. Baecker, “A microcomputer-based conducting system,” Computer Music Journal, vol. 4, no. 1, pp. 8‑21, Spring 1980.
  54. Lawrence H. Sasaki, Kenneth C. Smith, “A simple data reduction scheme for additive synthesis,” Computer Music Journal, vol. 4, no. 1, pp. 22‑24, Spring 1980.
  55. H.T. Mouftah, K.C. Smith, “Design and implementation of three-valued logic systems with m.o.s. integrated circuits,” IEE Proceedings G, Electronic Circuits and Systems, IEE Proceedings G, vol. 127, no. 4, pp. 165‑168, August 1980.
  56. H.T. Mouftah, K.C. Smith, Z.G. Vranesic, “Ternary rate-multipliers,” IEEE Transactions on Computers, vol. 29, no. 10, pp. 929‑931, October 1980.
  57. Sudhir K. Arora, K.C. Smith, “A normal form based on theta-join and projection for relational data bases,” IEEE Compcon, pp. 295‑300, September, 1990.
  58. Sudhir K. Arora, K.C. Smith, “A graphical interpretation of dependency structures in relational data bases,” International Journal of Parallel Programming, vol. 10, no. 3, pp. 187‑213, 1981.
  59. Sudhir K. Arora, S.R. Dumpala, K.C. Smith, “WCRC: An ANSI SPARC machine architecture for data base management,” International Symposium on Computer Architecture (ISCA), pp. 373‑387, May 1981
  60. Sudhir K. Arora, K.C. Smith, “Graphical normal forms based on root dependencies in relational data base systems,” International Journal of Computer and Information Systems, vol. 18, no. 4, pp. 235‑259, August 1981.
  61. K.C. Smith, “The prospects for multivalued logic: A technology and applications view,” IEEE Transactions on Computers, vol. 30, no. 9, pp. 619‑634, September 1981.
  62. N. Mehta, F.E. Holmes, K.C. Smith, “A fast image processor,” International Electrical, Electronics Conference and Exposition,  pp. 240‑241, October 1981.
  63. Mou Hu, Kenneth C. Smith, “A new type of self checking synchronous sequential machine based on 2-of-3 valued logic circuits,” International Symposium on Multiple-Valued Logic (ISMVL), pp. 139‑149, May 1982.
  64. Nimish Mehta, K.C. Smith, F.E. Holmes, “Feature extraction as a tool for computer input,” International Conference on Acoustics, Speech, and Signal Processing (ICASSP), vol. 7, pp. 818‑820, May 1982.
  65. H.T. Mouftah, K.C. Smith, “Injected voltage low-power CMOS for 3-valued logic,” IEE Proceedings G, Electronic Circuits and Systems , vol. 129, no. 6, pp. 270‑272, December 1982.
  66. M. Hu, K.C. Smith, H.T. Mouftah, “Low power 2-of-3-valued CMOS self-checking circuits,” International Symposium on Multiple-Valued Logic (ISMVL), pp. 65‑69, 1983.
  67. W. Buxton, M.R. Lamb, D. Sherman, K.C. Smith, “Towards a comprehensive user interface management system,” Computer Graphics, vol. 17, no. 3, pp. 35‑42, July 1983.
  68. K.C. Smith, “The future for personal computers in laboratory instruction in electrical engineering,” EdCompCon, pp. 105‑113, November 1984.
  69. J.J. Bergin, K.C. Smith, “The roles of multi-level signalling and multi-valued logic in digital communications,” International Symposium on Multiple-Valued Logic (ISMVL), pp. 115‑123, May 1985.
  70. M. Hu, K.C. Smith, “Some new results for reliable 2-of-3-valued systems,” International Symposium on Multiple-Valued Logic (ISMVL), pp. 204, May 1985.
  71. CMOS integrated circuits for multivalued logic,” International Journal of Electronics, vol. 58, no. 1, pp. 43‑50, 1985.
  72. Ross Gillett, Kenneth C. Smith, Bob Pritchard, “MADDM—Dance-directed music,” International Computer Music Conference, pp. 329‑330, 1985.
  73. John Kitamura, William Buxton, Martin Snelgrove, Kenneth C. Smith, “Music synthesis by simulation using a general-purpose signal processing system,” International Computer Music Conference (ICMC), pp. 155‑158, 1985.
  74. S.K. Lee, W. Buxton, K.C. Smith, “A multi-touch three dimensional touch-sensitive tablet,” Proceedings of the 1985 Conference on Human Factors in Computer Systems, pp. 21‑25, April 1985.
  75. Tao Yang, K.C. Smith, “A fault diagnosis algorithm based on intelligent reasoning,” International Symposium on Circuits and Systems (ISCAS), pp. 763‑766, 1985.
  76. Marius V.A. Hancu, K.C. Smith, “Probabilistic systolic arrays,” IEEE International Conference on Computer Design: VLSI in Computers, pp. 242‑243, October 1985.
  77. Marius V.A. Hancu, Kenneth C. Smith, “DYPP—A VLSI supercomputer architecture supporting two-level fault tolerance, program graph injection and data levitation concepts,” ACM Conference on Computer Science, pp. 115‑120, 1986.
  78. Mou Hu, Kenneth C. Smith, “Ternary scan design for VLSI testability,” IEEE Transactions on Computers, vol. 35, no. 2, pp. 168‑170, February 1986.
  79. C.P. Chong, K.C. Smith, “Biquadratic filter sections employing a single current conveyor,” Electronics Letters, vol. 22, no. 22, pp. 1162‑1164, October 1986.
  80. C.P. Chong, K.C. Smith, “Sinusoidal oscillators employing current conveyors,” International Journal of Electronics, vol. 62, no. 4, pp. 515‑520, 1987.
  81. Federico Bumbaca, Kenneth C. Smith, “Design and implementation of a colour vision model for computer vision applications,” Computer Vision, Graphics, and Image Processing, vol. 39, no. 2, pp. 226‑345, August 1987.
  82. W. Song, K.C. Smith, W.M. Snelgrove, “Partitioning for pseudo-exhaustive testing is NP-complete,” Electronics Letters, vol. 23, no. 20, pp. 1060‑1062, September 1987.
  83. Chu Phoon Chong, Kenneth C. Smith, Zvonko G. Vranesic, “Using active components to perform voltage division in digital-to-analog conversion,” IEEE Symposium on VLSI Circuits, pp. 119‑120, 1988.
  84. Marius V.A. Hancu, Kenneth C. Smith, “DYPP—A VLSI dynamic-graph ensemble machine,” International Conference on Supercomputing, pp. 90‑100, 1988.
  85. Kenneth C. Smith, “Multiple-valued logic: A tutorial and appreciation,” Computer, vol. 21, no. 4, pp. 17‑27, April 1988.
  86. Hong Jiang, Kenneth C. Smith, “A partial-multiple-bus computer structure with improved cost-effectiveness,” International Symposium on Computer Architecture (ISCA), pp. 116‑122, June 1988.
  87. Federico Bumbaca, Kenneth C. Smith, “A practical approach to image restoration for computer vision,” Computer Vision, Graphics, and Image Processing, vol. 42, no. 2, pp. 220‑233, August 1987.
  88. Mou Hu, K.C. Smith, “A discussion on the theory of logic value redundancy,” International Symposium on Multiple-Valued Logic (ISMVL), pp. 118‑4121, May 1988.
  89. Chu Phoon Chong, Kenneth C. Smith, “A high-resolution CMOS comparator,” International Journal of Electronics, vol. 64, no. 3, pp. 409‑415, March 1988.
  90. Marius V.A. Hancu, Kenneth C. Smith, “Implementing probabilistic algorithms on VLSI architectures,” Integration, the VLSI Journal, vol. 6, no. 1, pp. 59‑82, May 1988.
  91. C. Charette, S. Park, R. Williams, B. Benhabib, K.C. Smith, “Development and integration of a micro-computer image analysis system for automatic PCB inspection,” International Conference on Computer Integrated Manufacturing, pp. 129‑135, May 1988.
  92. Chu Phoon Chong, Kenneth C. Smith, “The design of a high-resolution CMOS comparator,” IEEE International Symposium on Circuits and Systems (ISCAS), pp. 1427‑1430, vol. 2, May 1989.
  93. Hsu Liang Ho, Kenneth C. Smith, “Switched capacitor circuits in the implementation of multiple-valued logic,” International Symposium on Multiple-Valued Logic (ISMVL), pp. 202‑209, May 1989.
  94. Kenneth J. Schultz, Kenneth C. Smith, “A CMOS binary adder using quaternary ganged-logic internal node,” International Symposium on Multiple-Valued Logic (ISMVL), pp. 356‑359, May 1989.
  95. Z. Zhou, K.C. Smith, B. Benhabib, R. Safaee-Rad, “Morphological skeleton transforms for determining position and orientation of pre-marked objects,” IEEE Pacific Rim Conference on Communications, Computers and Signal Processing, pp. 301‑305, June 1989.
  96. R. Safaee-Rad, B. Benhabib, K.C. Smith, K.M. Ty, “Position, rotation, and scale-invariant recognition of 2-dimensional objects using a gradient coding scheme,” pp. 306‑311, June 1989.
  97. Chu Phoon Chong, Kenneth C. Smith, Zvonko G. Vranesic, “Using active components to perform voltage division in digital-to-analog conversion,” IEEE Journal of Solid-State Circuits, vol. 24, no. 4, pp. 999‑1002, August 1989.
  98. C.P. Chong, K.C. Smith, Z.G. Vranesic, “Design of an A/D converter using complementary three-input amplifiers,” European Conference on Circuit Theory and Design, pp. 202‑209, September 1989.
  99. R. Safaee-Rad, B. Benhabib, K.C. Smith, Z. Zhou, “Pre-marking methods for 3D object recognition,” IEEE International Conference on Systems, Man and Cybernetics, pp. 592‑595, vol. 2, November 1989.
  100. A.C.P. Loui, A.N. Venetsanopoulos, K.C. Smith, “Two-dimensional shape representation using morphological correlation functions,” International Conference on Acoustics, Speech, and Signal Processing (ICASSP), pp. 2165‑2168, vol. 4, April 1990.
  101. Mou Hu, Kenneth C. Smith, “Application of multiple-valued switch-level algebra to the design and analysis of pass-transistor switch networks ,” International Symposium on Multiple-Valued Logic (ISMVL), pp. 196‑201, May 1990.
  102. Hsu Liang Ho, Kenneth C. Smith, “Integrator-chain multiplier,” International Symposium on Multiple-Valued Logic (ISMVL), pp. 363‑369, May 1990.
  103. Chu Phoon Chong, Kenneth C. Smith, Zvonko G. Vranesic, “Three-input amplifiers,” IEEE International Symposium on Circuits and Systems (ISCAS), pp. 3217‑3220, vol. 4, May 1990.
  104. A.C.P. Loui, A.N. Venetsanopoulos, K.C. Smith, B. Benhabib, “Non-linear pipeline architectures for morphological signal processing,” IEEE International Symposium on Circuits and Systems (ISCAS), pp. 1438‑1441, vol. 2, May 1990.
  105. R. Safaee-Rad, K.C. Smith, B. Benhabib, “Accurate estimation of elliptical shape parameters from a grey-level image,” International Conference on Pattern Recognition, pp. 20‑26, vol. 2, June 1990.
  106. Kenneth J. Schultz, Robert J. Francis, Kenneth C. Smith, “Ganged CMOS: Trading standby power for speed,” IEEE Journal of Solid-State Circuits, vol. 25, no. 3, pp. 870‑873, June 1990.
  107. H.-L. Ho, K.C. Smith, “SC and pass transistor combined circuits,” Electronics Letters, vol. 26, no. 12, pp. 769‑770, June 1990.
  108. Alexander C.P. Loui, Anastasios N. Venetsanopoulos, K.C. Smith, “High-speed architectures for morphological image processing,” Proc. SPIE 1247, Nonlinear Image Processing pp. 145‑146, 1990.
  109. I.B. Turksen, L.Z. Guo, C. Lucas, K.C. Smith, “Hardware realization of fuzzy logic and artificial neural network integration,” International Conference on Fuzzy Logic and Neural Networks, vol. 1, pp. 133‑136, July 1990.
  110. Chu Phoon Chong, Kenneth C. Smith, “A CMOS current comparator with well-controlled hysteresis,” Midwest Symposium on Circuits and Systems, pp. 269‑272, vol. 1, August 1990.
  111. R. Safaee-Rad, K.C. Smith, B. Benhabib, I. Tchoukanov, “An analytical method for the 3D-location estimation of circular features for an active-vision system,” IEEE International Conference on Systems, Man and Cybernetics, pp. 215‑220, November 1990.
  112. R.A. Duncan, K.C. Smith, Adel S. Sedra, “Gallium arsenide pseudo-current-mode logic,” Electronics Letters, vol. 26, no. 25, pp. 2130‑2132, December 1990.
  113. I. Tchoukanov, R. Safaee-Rad, B. Benhabib, K.C. Smith, “The angle-of-sight signature for 2D shape analysis,” International Conference on Acoustics, Speech, and Signal Processing (ICASSP), pp. 2461‑2464, vol. 4, April 1991.
  114. R. Safaee-Rad, K.C. Smith, B. Benhabib, I. Tchoukanov, “Application of moment and Fourier descriptors to the accurate estimation of elliptical shape parameters,” International Conference on Acoustics, Speech, and Signal Processing (ICASSP), pp. 2465‑2468, vol. 4, April 1991.
  115. C. Lucas, I.B. Turksen, K.C. Smith, “A general-purpose inference processor for real-time intelligent controllers using systolic arrays,” International Symposium on Multiple-Valued Logic (ISMVL), pp. 316‑321, May 1991.
  116. A.C.P. Loui, A.N. Venetsanopoulos, K.C. Smith, “A new motion-estimation algorithm based on morphological correlation,” IEEE International Symposium on Circuits and Systems (ISCAS), pp. 682‑685, vol. 1, June 1991.
  117. Chu Phoon Chong, Kenneth C. Smith, Zvonko G. Vranesic, “On improving the linearity of DACs using TIAMPs,” IEEE International Symposium on Circuits and Systems (ISCAS), pp. 1513‑1516, vol. 3, June 1991.
  118. Chu Phoon Chong, C. Andre T. Salama, Kenneth C. Smith, “A sub-nanoampere current differentiator,” IEEE International Symposium on Circuits and Systems (ISCAS), pp. 2593‑2596, vol. 5, June 1991.
  119. Steve W. Wood, Kenneth C. Smith, P. Glenn Gulak, “Latched differential FET logic,” IEEE International Symposium on Circuits and Systems (ISCAS), pp. 3011‑3014, vol. 5, June 1991.
  120. R. Safaee-Rad, I. Tchoukanov, B. Benhabib, K.C. Smith, “Accurate parameter estimation of quadratic curves from grey-level images,” CVGIP: Image Understanding, vol. 54, no. 2, pp. 259‑274, September 1991.
  121. R. Safaee-Rad, K.C. Smith, B. Benhabib, I. Tchoukanov, “Constraints on quadratic curves under perspective projection,” IEEE International Conference on Systems, Man and Cybernetics, pp. 57‑62, vol. 1, October 1991.
  122. X. He, B. Benhabib, K.C. Smith, R. Safaee-Rad, “Optimal camera placement for an active-vision system,” IEEE International Conference on Systems, Man and Cybernetics, pp. 69‑74, vol. 1, October 1991.
  123. C.P. Chong, C.A.T. Salama, K.C. Smith, “Real-time edge detection and image segmentation,” Analog Integrated Circuits and Signal Processing2, vol. 2, pp. 117‑130, 1992.
  124. Chu Phoon Chong, C. Andre T. Salama, Kenneth C. Smith, “Image-motion detection using analog VLSI,” IEEE Journal of Solid-State Circuits, vol. 27, no. 1, pp. 93‑96, January 1992.
  125. Alexander C.P. Loui, A.N. Venetsanopoulos, K.C. Smith, “Flexible architectures for morphological image processing and analysis,” IEEE Transactions on Circuits and Systems for Video Technology, vol. 2, no. 1, pp. 72‑83, March 1992.
  126. Hong Jiang, Kenneth C. Smith, “PPMB: A partial-multiple-bus multiprocessor architecture with improved cost-effectiveness,” IEEE Transactions on Computers, vol. 41, no. 3, pp. 361‑366, March 1992.
  127. Chu Phoon Chong, C. Andre T. Salama, Kenneth C. Smith, “On the accuracy of image velocity computation using delay lines,” IEEE International Symposium on Circuits and Systems (ISCAS), pp. 2485‑2488, vol. 5, May 1992.
  128. Mou Hu, Shensheng Xu, K.C. Smith, “On the use of multiple-valued switch-level algebra to analyze binary MOS bridge circuits and dynamic circuits,” International Symposium on Multiple-Valued Logic (ISMVL), pp. 396‑400, May 1992.
  129. R. Safaee-Rad, K.C. Smith, B. Benhabib, I. Tchoukanov, “Application of moment and Fourier descriptors to the accurate estimation of elliptical-shape parameters,” Pattern Recognition Letters, vol. 13, no. 7, pp. 497‑508, July 1992.
  130. Alexander C.P. Loui, A.N. Venetsanopoulos, K.C. Smith, “Morphological autocorrelation transform: A new representation and classification scheme for two-dimensional images,” IEEE Transactions on Image Processing, vol. 1, no. 3, pp. 337‑354, July 1992.
  131. I. Tchoukanov, R. Safaee-Rad, B. Benhabib, K.C. Smith, “A new boundary-based shape recognition technique ,” IEEE/RSJ International Conference on Intelligent Robots and System, pp. 1030‑1037, July 1992.
  132. R. Safaee-Rad, I. Tchoukanov, B. Benhabib, K.C. Smith, “3D-pose estimation from a quadratic-curved feature in two perspective views,” International Conference on Pattern Recognition, pp. 341‑344, vol. 1, September 1992.
  133. Chu Phoon Chong, C. Andre T. Salama, Kenneth C. Smith, “An imager with built-in image-velocity computation capability,” IEEE Transactions on Circuits and Systems for Video Technology, vol. 2, no. 3, pp. 306‑312, September 1992.
  134. Chu Phoon Chong, C. Andre T. Salama, Kenneth C. Smith, “A novel technique for image-velocity computation,” IEEE Transactions on Circuits and Systems for Video Technology, vol. 2, no. 3, pp. 313‑318, September 1992.
  135. X. He, B. Benhabib, K.C. Smith, R. Safaee-Rad, “Optimal camera and marker arrangements for an active-vision system,” IEEE International Conference on Systems, Man and Cybernetics, pp. 334‑339, vol. 1, October 1992.
  136. Reza Safaee-Rad, Ivo Tchoukanov, Kenneth Carless Smith, Bensiyon Benhabib, “Three-dimensional location estimation of circular features for machine vision,” IEEE Transactions on Robotics and Automation, vol. 8, no. 5, pp. 624‑640, October 1992.
  137. I. Tchoukanov, R. Safaee-Rad, K.C. Smith, B. Benhabib, “The angle-of-sight signature for two-dimensional shape analysis of manufactured objects,” Pattern Recognition, vol. 25, no. 11, pp. 1289‑1305, November 1992.
  138. K.C. Smith, P.G. Gulak, “Prospects for multiple-valued integrated circuits,” IEICE Transactions on Electronics, vol. 76, no. 3, pp. 372‑832, 1993.
  139. R. Safaee-Rad, I. Tchoukanov, X. He, B. Benhabib, K.C. Smith, “An active-vision system for recognition of pre-marked objects in robotic assembly workcells,” IEEE Computer Society Conference on Computer Vision and Pattern Recognition, pp. 722‑723, June 1993.
  140. Peter C.Y. Chen, James K. Mills, Kenneth C. Smith, “On the dynamics of a neural network for robot trajectory tracking,” IEEE/RSJ International Conference on Intelligent Robots and System, pp. 252‑258, vol. 1, July 1993.
  141. A. Bonen, K.C. Smith, B. Benhabib, “Development of a robust electro-optical proximity sensor,” IEEE/RSJ International Conference on Intelligent Robots and System, pp. 986‑990, vol. 2, July 1993.
  142. S. Mehdi Fakhraie, K.C. Smith, “Generalized artificial neural networks (GANN),” Canadian Conference on Electrical and Computer Engineering, pp. 469‑472, vol. 1, September 1993.
  143. Peter C.Y. Chen, James K. Mills, Kenneth C. Smith, “Parameter uncertainty compensation in robot trajectory tracking: A neural network approach,” IEEE International Conference on Systems, Man and Cybernetics, pp. 317‑322, vol. 4, October 1993.
  144. R.A. Williams, B. Benhabib, K.C. Smith, “Model-based diagnostics for the supervisory control of manufacturing systems,” AAAI National Conference on Artificial Intelligence, pp. 134‑139, 1994.
  145. S. Mehdi Fakhraie, K.C. Smith, J.M Xu, “Comparison of three different architectures for MOS-compatible quadratic synapses,” International Symposium on Speech, Image Processing and Neural Networks, pp. 483‑486, vol. 2, April 1994.
  146. R.A. Williams, B. Benhabib, K.C. Smith, “A hybrid supervisory control system for flexible manufacturing workcells,” IEEE International Conference on Robotics and Automation, pp. 2551‑2556, vol. 3, May 1994.
  147. Cuong T. Nguyen, Man Wong, Johnny K.O. Sin, K.C. Smith, “Multimedia textbook paradigm: A demonstration in solid-state device electronics,” IEEE Conference on Multi-Media Engineering Education, pp. 99‑107, July 1994.
  148. Peter C.Y. Chen, James K. Mills, Kenneth C. Smith, “An approach to uncertainty compensation using a neural network for multi-manipulator system control,” IEEE/RSJ/GI International Conference on Intelligent Robotics and Systems, pp. 1048‑1055, vol. 2, September 1994.
  149. Sied Mehdi Fakhraie, Adalbert Konrad, Kenneth Carless Smith, “Neuro-computation techniques in sampled-data electromagnetic field problems,” IEEE Transactions on Magnetics, vol. 30, no. 5, pp. 3637‑3640, September 1994.
  150. A. Bonen, R.E. Saad, K.C. Smith, B. Benhabib, “Novel approach for increased dynamic range in optoelectronic sensing applications,” Electronics Letters, vol. 30, no. 18, pp. 1513‑1515, September 1994.
  151. R.E. Saad, A. Bonen, K.C. Smith, B. Benhabib, “Distributed-force recovery for a planar photoelastic tactile sensor,” IEEE Instrumentation and Measurement Technology Conference, pp. 532‑537, April 1995.
  152. A. Bonen, R.E Saad, K.C. Smith, B. Benhabib, “A novel opto-electronics interface-circuit design for sensing applications,” IEEE Instrumentation and Measurement Technology Conference, pp. 658‑663, April 1995.
  153. S. Mehdi Fakhraie, J.M. Xu, K.C. Smith, “Design of CMOS quadratic neural networks,” IEEE Pacific Rim Conference on Communications, Computers, and Signal Processing, pp. 493‑496, May 1995.
  154. Xiaoye He, Beno Benhabib, Kenneth C. Smith, “CAD-based off-line planning for active vision,” Journal of Robotics, vol. 18, no. 10, 677‑691, October 1995.
  155. Kam-Wing Li, I. Burhan Turksen, Kenneth C. Smith, “Some practical considerations in implementing a pulse-control fuzzy controller,” IEEE International Conference on Systems, Man and Cybernetics, pp. 3652‑3657, vol. 4, October 1995.
  156. A. Bonen, R.E Saad, K.C. Smith, B. Benhabib, “A novel calibration technique for electro-optical proximity sensors,” IEEE International Conference on Industrial Electronics, Control, and Instrumentation, pp. 1190‑1195, vol. 2, November 1995.
  157. R.E. Saad, A. Bonen, K.C. Smith, B. Benhabib, “Finite-element analysis for photoelastic tactile sensors,” IEEE International Conference on Industrial Electronics, Control, and Instrumentation, pp. 1202‑1207, vol. 2, November 1995.
  158. S.M. Rooks, B. Benhabib, K.C. Smith, “Development of an inspection process for ball-grid- array technology using scanned-beam x-ray laminography,” IEEE Transactions on Components, Packaging, and Manufacturing Technology--Part A, vol. 18, no. 4, pp. 851‑861, December 1995.
  159. Peter C.Y. Chen, James K. Mills, Kenneth C. Smith, “Performance improvement of robot continuous-path operation through iterative learning using neural networks,” Machine Learning, vol 23, pp 191‑220, 1996.
  160. R.A. Williams, B. Benhabib, K.C. Smith, “A DES-theory-based hybrid supervisory control system for manufacturing systems,” Journal of Manufacturing Systems, vol. 15, no. 2, pp. 71‑83, 1996.
  161. Ricardo E. Saad, Adi Bonen, Kenneth C. Smith, Beno Benhabib, “Distributed-force recovery for a planar photoelastic tactile sensor,” IEEE Transactions on Instrumentation and Measurement, vol. 45, no. 2, pp. 541‑546, April 1996.
  162. Adi Bonen, Ricardo E. Saad, Kenneth C. Smith, Beno Benhabib, “A novel optoelectronic interface-circuit design for sensing applications,” IEEE Transactions on Instrumentation and Measurement, vol. 45, no. 2, pp. 580‑584, April 1996.
  163. Kam-Wing Li, I. Burhan Turksen, Kenneth C. Smith, “An FPGA implementation of a self-tuned fuzzy controller,” Biennial Conference of the Fuzzy Information Processing Society, pp. 285‑288, June 1996.
  164. Kam-Wing Li, I. Burhan Turksen, Edward J. Davison, Kenneth C. Smith, “Stabilization of unstable and unintuitive plants by fuzzy control,” IEEE Transactions on Systems, Man, and Cybernetics—Part B: Cybernetics, vol. 27, no. 1, pp. 55‑67, February 1997.
  165. Adi Bonen, Ricardo E. Saad, Kenneth Carless Smith, Beno Benhabib, “A novel electrooptical proximity sensor for robotics: Calibration and active sensing,” IEEE Transactions on Robotics and Automation, vol. 13, no. 3, pp. 377‑386, June 1997.
  166. Jeremy R. Cooperstock, Sidney S. Fels, William Buxton, Kenneth C. Smith, “Reactive environments,” Communications of the ACM, vol. 40, no. 9, pp. 65‑73, September 1997.
  167. R.E. Saad, A. Bonen, K.C. Smith, B. Benhabib, “Inverse analysis for the recovery of forces applied to photoelastic tactile transducers,” Journal of Robotic Systems, vol. 15, no. 5, 259‑280, May 1998.
  168. Amir M. Sodagar, S.M. Fakhraie, K.C. Smith, “A low-voltage current-controlled oscillator with low supply dependency,” International Conference on Microelectronics, pp. 282‑285, December 1998.
  169. R. Rafati, S.M. Fakhraie, K.C. Smith, “Low-power data-driven dynamic logic (D3L),” IEEE International Symposium on Circuits and Systems (ISCAS), pp. 752‑755, vol. 1, May 2000.
  170. R. Rafati, A.Z. Charaki, S.M. Fakhraie, K.C. Smith, “Data-driven dynamic logic versus NP-CMOS logic, a comparison,” International Conference on Microelectronics, pp. 57‑60, November 2000.
  171. G.R. Chaji, S.M. Fakhraie, K.C. Smith, “High-speed low-power adder with a new logic style: Pseudo dynamic logic (SDL),” International Conference on Microelectronics, pp. 137‑140, October 2001.
  172. G.R. Chaji, S.M. Fakhraie, K.C. Smith, “Pseudo dynamic logic (SDL): A high-speed and low-power dynamic logic family,” IEEE International Symposium on Circuits and Systems (ISCAS), pp. 245‑248, vol. 3, May 2002.
  173. R. Rafati, A.Z. Charaki, G.R. Chaji, S.M. Fakhraie, K.C. Smith, “Comparison of a 17b multiplier in dual-rail domino and in dual-rail D3L (D4L) logic styles,” IEEE International Symposium on Circuits and Systems (ISCAS), pp. 257‑260, vol. 3, May 2002.
  174. Sied Mehdi Fakhraie, Hamed Farshbaf, Kenneth Carless Smith, “Scalable closed-boundary analog neural networks,” IEEE Transactions on Neural Networks, vol. 15, no. 2, pp. 492‑504, March 2004.
  175. Ramin Rafati, Sied Mehdi Fakhraie, Kenneth Carless Smith, “A 16-bit barrel-shifter implemented in data-driven dynamic logic (D3L),” IEEE Transactions on Circuits and Systems—I: Regular Papers, vol. 53, no. 10, pp. 2194‑2202, October 2006.
  176. Joel Ironstone, Milan Graovac, James Martens, Martin Rozee, K.C. Smith, “Novel lead configurations for robust bio-impedance acquisition,” International Conference of the IEEE Engineering in Medicine and Biology Society, pp. 2764‑2767, August 2007.

Patents

  1. K.C. Smith, A.S. Sedra, “Current conveyor with virtual input reference potential,” U.S. Patent 3582689, June 1, 1971.
  2. K.C. Smith, A.S. Sedra, “Three-port electrical network,” U.S. Patent 3619790, November 9, 1971.
  3. C.P. Chong, K.C. Smith, Z.G. Vranesic, “Analog to digital converter, a digital to analog converter and an operational amplifier therefor,” U.S. Patent 4978959, Dec. 18, 1990.
  4. L.W. Organ, K.C. Smith, R. Safaee-Rad, M. Graovac, G.P. Darmos, I. Gavrilov, “Electrical impedance method and apparatus for detecting and diagnosing diseases,” U.S. Patent 6768921, July 27, 2004.
  5. K.C. Smith, J.S. Ironstone, F. Zhang, “Bioimpedance measurement using controller-switched current injection and multiplexer selected electrode connection,” U.S. Patent 7212852, May 1, 2007.
  6. K.C. Smith, J.S. Ironstone, “Eliminating interface artifact errors in bioimpedance measurements,” U.S. Patent 7457660, Nov. 25, 2008.

Articles

  1. Kenneth C. Smith, A half-century of press relations at ISSCC, International Solid-State Circuits Conference, pp. 515, February 2003.
  2. Kenneth C. Smith, Rethinking an engineer's education, EETimes, April 2004.
  3. Jan Van der Spiegel, Kenneth C. Smith, ISSCC paper submissions—Increasing the likelihood of success, IEEE SSCS News, Summer 2007.
  4. Kenneth C. Smith, The story behind Microelectronic Circuits, IEEE Solid-State Circuits Magazine, pp. 8‑17, Fall 2009.
  5. Kenneth C. Smith, Alice Wang, Laura C. Fujino, Through the looking glass: Trend tracking for ISSCC 2012, IEEE Solid-State Circuits Magazine, vol. 4, no. 1, pp. 4‑20, 2012.
  6. Kenneth C. Smith, Alice Wang, Laura C. Fujino, Through the looking glass—Part 1 of 2: Trend tracking for ISSCC 2013, IEEE Solid-State Circuits Magazine, vol. 5, no. 1, pp. 71‑89, 2013.
  7. Kenneth C. Smith, Alice Wang, Laura C. Fujino, Through the looking glass—Part 2 of 2: Trend tracking for ISSCC 2013, IEEE Solid-State Circuits Magazine, vol. 5, no. 2, pp. 33‑43, 2013.
  8. S. Narendra, Laura C. Fujino, Kenneth C. Smith, Through the looking glass continued (III)—Update to trends in solid-state circuits and systems from ISSCC 2014, IEEE Solid-State Circuits Magazine, vol. 6, no. 1, pp. 49‑53, 2014.

This page is maintained on behalf of Prof. Smith by Kostas Pagiamtzis. Please contact me at kostas@pagiamtzis.com with corrections or additions.