(Another) Possible Error in Pinouts

Subject:

Comments:
: I think there may be another error in the pinouts on : our data sheets. : For the Flex Expansion busses (all three of them) hole : number 8 is supposed to correspond to Dedicated Input 1 : (DI1) and pin number 99. : This is a stark contradiction!!! : On the Flex10K device data sheets, the pins that are : listed as being dedicated inputs for 240 pin devices : are pins 90, 92, 210 and 212. Hmmm...no 99! : Also pin 99 is supposed to be available on FLEX_EXPAN_A : at hole number 54. (So why would they put it elsewhere : as well). : I haven't been able to check on the actual board : (somebody locked the door to GB150!) whether hole : number 8 is connected to pin 99 or pin 90, but I'll : betcha' dollars to doughnuts that pin 99 IS NOT DI1. : (I'll also bet that hole number 8 is connected to : pin 90, the real DI1). : Anyways, I've attached the Altera website link if you : want to see for yourself (p.124 of the data book or : p. 104 of the PDF file). : : Jayesh (ahh...details). : P.S. Hole number 32 on FLEX_EXPAN_C connects to pin 199 : NOT 198 (I don't know if this correction was listed on : the handout we received). Although this doesn't really : matter to us since you (probably) aren't using expansion : bus C.

Optional Link URL:
Link Title:
Optional Image URL: