Current Messages

led ripple generation - venkat 18:52:34 8/23/99 (0)
Byte Stuffing - Guillermo Santos 12:48:59 1/15/99 (1)
- Re: Byte Stuffing - Colin 13:27:26 5/12/99 (0)
Question about 68K Bus Arbitration - David Lie 10:46:29 4/25/98 (1)
- Re: Question about 68K Bus Arbitration - John Chappel 07:48:02 4/26/98 (0)
Test Message - PLEASE DO NOT READ THIS!!! (It will erase your hard drive FOREVER) - Jim 17:50:21 4/21/98 (0)
test - Kevin Chung 16:37:03 4/17/98 (0)
test - Kevin Chung 16:34:18 4/17/98 (0)
test message - Kevin Chung 16:22:30 4/17/98 (0)
quiksort - Marc Labonté 10:51:14 4/16/98 (0)
problem set #3 - Steve 06:00:34 3/27/98 (1)
- Re: problem set #3 - John Chappel 11:45:56 3/27/98 (0)
Lab 4 - Jayesh T. Patel 00:21:23 3/22/98 (2)
- Re: Lab 4 - John Chappel 06:57:32 3/22/98 (1)
  - Re: Lab 4 - Loop to measure time - Jayesh T. Patel 16:45:25 3/23/98 (0)
OUT vs. BUFFER - Jayesh T. Patel 14:30:07 3/19/98 (1)
- Re: OUT vs. BUFFER - Michael van Dam 12:46:54 3/24/98 (0)
VHDL ref online - Neil Brewster 22:34:21 3/18/98 (0)
Lab4 - Steve 13:22:45 3/16/98 (3)
- Re: Lab4 - Vaughn Betz 16:43:10 3/17/98 (0)
- Re: Lab4 - Maciej Kalisiak 17:52:24 3/16/98 (1)
  - Re: Lab4 - Vaughn Betz 16:45:06 3/17/98 (0)
VHDL conditions - Jayesh T. Patel 16:00:52 3/13/98 (1)
- Re: VHDL conditions - Michael van Dam 13:18:09 3/14/98 (0)
Correction to previous message - Jayesh T. Patel 19:27:55 3/12/98 (0)
(Another) Possible Error in Pinouts - Jayesh T. Patel 19:22:25 3/12/98 (2)
- Re: (Another) Possible Error in Pinouts - Jayesh T. Patel 20:33:51 3/17/98 (0)
- Re: (Another) Possible Error in Pinouts - Maciej Kalisiak 18:40:15 3/15/98 (0)
Missing a cable anyone? - Michael van Dam 17:22:19 3/11/98 (0)
One method to free up some pins - Michael van Dam 20:20:39 3/10/98 (0)
Vector file for simulation - Vaughn Betz 16:26:45 3/10/98 (0)
BG and BR are bidirectional? - Wisnu Wurjantara 23:54:58 3/09/98 (1)
- Re: BG and BR are bidirectional? - Michael van Dam 13:20:55 3/10/98 (0)
Not enough pins on EXPAND-B port for lab?? - Junya Ho 15:14:31 3/09/98 (4)
- Re: Not enough pins on EXPAND-B port for lab?? - Vaughn Betz 16:20:09 3/10/98 (3)
  - Re: Not enough pins on EXPAND-B port for lab?? - Jim 16:51:11 3/10/98 (2)
    - Re: Not enough pins on EXPAND-B port for lab?? - Michael van Dam 20:14:38 3/10/98 (1)
      - Re: Not enough pins on EXPAND-B port for lab?? - Maciej Kalisiak 18:27:55 3/16/98 (0)
Bus Interface - Howard Chou 14:56:25 3/08/98 (2)
- Re: Bus Registers - W. Holland 06:21:55 1/18/99 (0)
- Re: Bus Interface - Michael van Dam 11:34:23 3/09/98 (0)
Run everything on 10Mhz clock? Or have some async? - Junya Ho 08:22:14 3/07/98 (1)
- Re: Run everything on 10Mhz clock? Or have some async? - Vaughn Betz 16:22:26 3/10/98 (0)
68K Bus arbitration - David Lie 11:39:44 3/01/98 (1)
- Re: 68K Bus arbitration - Michael van Dam 16:32:39 3/03/98 (0)
Midterm - Steve 08:38:27 2/26/98 (0)
UDS/LDS - Jim 09:26:18 2/24/98 (1)
- Re: UDS/LDS - Michael van Dam 10:32:52 2/24/98 (0)
Row and Collumn Addresses - Wisnu Wurjantara 15:22:39 2/21/98 (2)
- Re: Row and Collumn Addresses - Wisnu Wurjantara 16:17:59 2/21/98 (1)
  - Re: Row and Collumn Addresses - Michael van Dam 19:19:13 2/23/98 (0)
Tristate buffer - Bhupinder 18:39:40 2/18/98 (2)
- Re: Tristate buffer - Maciej Kalisiak 22:16:51 2/20/98 (1)
  - Re: Tristate buffer - Michael van Dam 13:11:28 2/23/98 (0)
Wha??? - Jim 00:07:59 2/16/98 (1)
- Re: Wha??? - John Chappel 10:01:47 2/16/98 (0)
discrepancy of timing diagram with 68K specs - Maciej Kalisiak 16:14:11 2/15/98 (2)
- Re: discrepancy of timing diagram with 68K specs - Michael van Dam 11:13:34 2/16/98 (1)
  - Re: DTACK & DTACKn - James F. Chisese 13:31:41 4/08/99 (0)
Upper bytes of the DRAM - wisnu wurjantara 13:30:54 2/15/98 (1)
- Re: Upper bytes of the DRAM - John Chappel 09:56:31 2/16/98 (0)
Lab2 - Part One: Register and Display - Howard Chou 16:23:01 2/14/98 (0)
DTACK - Wisnu Wurjantara 09:46:40 2/14/98 (1)
- Re: DTACK - John Chappel 09:55:00 2/16/98 (0)
Static Hazard - Wisnu Wurjantara 17:52:15 2/13/98 (0)
68000 assembly - Mehrdad 20:37:25 2/12/98 (5)
- Re: 68000 assembly - Marc Labonté 10:47:24 4/16/98 (0)
- Re: 68000 assembly - John Chappel 11:20:38 2/13/98 (3)
  - Re: 68000 assembly - David Lie 23:13:27 2/22/98 (2)
    - Re: 68000 assembly - M.RAOUF 09:56:19 5/15/99 (0)
    - Re: 68000 assembly - Michael van Dam 19:14:20 2/23/98 (0)
Clean up? - Jayesh 14:01:43 2/12/98 (0)
LAB #2 - PART 1: Address Space - Jayesh 13:56:10 2/12/98 (3)
- Re: LAB #2 - PART 1: Address Space - John Chappel 11:22:42 2/13/98 (2)
  - Re: LAB #2 - PART 1: Address Space - Jayesh 14:28:45 2/26/98 (1)
    - Re: LAB #2 - PART 1: Address Space - Michael van Dam 14:23:16 2/27/98 (0)
2D array - Kristin Hofstee 20:13:44 2/08/98 (1)
- Re: 2D array - Michael van Dam 11:07:32 2/09/98 (0)
Using macrofunctions - Kristin Hofstee 17:58:15 2/08/98 (2)
- Re: Using macrofunctions - Michael van Dam 10:58:24 2/09/98 (1)
  - Re: Using macrofunctions - Kristin Hofstee 11:17:00 2/09/98 (0)
First bit in a packet - interoperability issues - Jayesh T. Patel 22:20:49 2/03/98 (1)
- Never mind, I figured it out (I was wrong). - Jayesh 17:09:23 2/05/98 (0)
Clarification for Data_Length... - Jim 19:45:24 2/02/98 (4)
- Re: Clarification for Data_Length... - John Chappel 09:46:26 2/03/98 (3)
  - Re: Clarification for Data_Length... - Jim 14:58:08 2/03/98 (2)
    - Re: Clarification for Data_Length... - Michael van Dam 18:44:24 2/03/98 (1)
      - Re: Clarification for Data_Length... - Jim 23:03:08 2/03/98 (0)
Filename suggestions - Michael van Dam 14:36:14 2/02/98 (0)
Size of circuit - Nancy Leung 19:06:39 1/27/98 (1)
- Re: Size of circuit - Michael van Dam 14:53:38 1/29/98 (0)
problem solved? -> questions about lab1 - Maciej Kalisiak 15:25:02 1/24/98 (1)
- Re: Lab 1 - Size of circuit - John Chappel 12:04:50 1/25/98 (0)
Anybody else get Fatal app. errors during compile? - Maciej Kalisiak 14:05:10 1/24/98 (3)
- Re: Anybody else get Fatal app. errors during compile? - Howard Chou 19:14:51 1/25/98 (2)
  - Re: Anybody else get Fatal app. errors during compile? - Lantos 23:12:29 1/30/98 (1)
    - What's up with the link here???? - Steve 13:43:24 2/03/98 (0)
One more for the commandant... - Jim 11:42:26 1/24/98 (4)
- Re: Lab 1 - bit stuffing - John Chappel 12:00:58 1/25/98 (3)
  - Re:Re: Lab 1 - bit stuffing - Jim 12:26:03 1/25/98 (2)
    - Re:Re: Lab 1 - bit stuffing - John Chappel 13:52:38 1/25/98 (1)
      - Re:Re: Lab 1 - bit stuffing - Thomas Morgan 22:15:13 4/22/99 (0)
Type Conversion - Howard Chou 02:39:57 1/24/98 (1)
- Re: Type Conversion - Michael van Dam 18:31:42 1/25/98 (0)
an0ther question - Junya Ho 18:09:35 1/23/98 (3)
- Re: an0ther question - John Chappel 11:48:48 1/25/98 (2)
  - PLease clarify - Jim 12:33:15 1/25/98 (1)
    - Re: PLease clarify - John Chappel 14:17:13 1/25/98 (0)
m0re qu3stions about lab 1 - Junya Ho 17:47:47 1/23/98 (2)
- Re: Lab1 - Header - John Chappel 11:47:02 1/25/98 (1)
  - CRC, header lsb first stuff - Maciej Kalisiak 20:00:49 1/25/98 (0)
Always use ACTIVE-LOW reset signals! - Michael van Dam 17:02:13 1/21/98 (0)
More Questions - Jim 08:48:11 1/20/98 (1)
- Re: More Questions - John Chappel 14:04:53 1/21/98 (0)
Lab1 Question - Jim 12:17:21 1/18/98 (2)
- Re: Lab1 Question - NRZI encoding - John Chappel 13:30:59 1/18/98 (0)
- Re: Lab1 Question - clock recovery - John Chappel 13:19:06 1/18/98 (0)
Lab 1 - Jayesh Patel 14:16:16 1/16/98 (1)
- Re: Lab 1 - Idle between packets - John Chappel 13:02:06 1/18/98 (0)
State Equations from Jan.12 Lecture - John Chappel 09:49:33 1/14/98 (0)
maxplusII in eecg - Bobby Sidharta 18:00:49 1/13/98 (1)
- Re: maxplusII in eecg - Vaughn Betz 11:38:37 1/14/98 (0)
Lab 1 (and subsequent labs) - Jayesh Patel 13:29:02 1/13/98 (1)
- Re: Lab 1 (and subsequent labs) - John Chappel 17:12:16 1/13/98 (0)
References - David Pischke 18:23:48 1/06/98 (1)
- Re: References - John Chappel 10:59:00 1/08/98 (0)
Welcome - John Chappel 09:08:32 1/02/98 (0)

Post A Message!

Scripts and WWWBoard created by Matt Wright and can be found at Matt's Script Archive